HDTV TV Antennas, Portable RV Satellite Dishes, TV Antenna Mounts, Antenna Rotors and Pre Amplifiers

Press and hold code search until light stays lit; release.

Press Power Button repeatedly until TV turns off.

Press Enter to save.

(Repeat for VCR & Cable)

Go from room-to-room and control your components up to 100+ ft away

No direct line-of-sight is needed. Now you can keep the doors on your entertainment center closed or have your components installed in another room or closet

Unlike other remote control extenders, you don't have to attach anything to the front of your remote control or be limited to using your remote in one room

Adds RF to your existing remote by simply installing the battery transmitter!!!!

Works with most AA and AAA remotes
Receiver has built in charger
Includes IR Emitting Eye
433 MHz

Remove the tab from the AAA battery transmitter. Push battery all the way into the sleeve.

Replace one of the AAA batteries inside your remote with the AAA transmitter.

Please Note: If your remote control uses AA batteries, insert the AAA transmitter into the supplied "AA" sleeve. If signal seems week, you may need to move the transmitter to another battery slot in your remote.

Place the receiver in front of the audio/video and position it:

With in 10m (30') of the audio/video equipments remote sensor

Where the front of the receiver directly faces the audio/video remote sensor

Fully extend the antenna

Connect the supplied AC/DC adapter's barrel plug into receivers DC 12v jack, and then connect the adapter's AC plug to a standard AC outlet.

Remove cover on the bottom of the receiver, place extra 2/3 AAA NiMH battery (supplied in kit) in slot marked for 2/3 AAA, make sure the 3 way switch on the is in position "B" and replace cover.

Insert the Bright Eye Emitter cord plug into the receiver IR output jack on the back of the receiver.

Position the Emitter bulb facing your audio/video equipment's IR sensor.

Find the best position, remove the adhesive tape on the back of the bulb and stick it in front of the audio/video equipment sensor.

Go from room-to-room and control your components up to 100+ ft away

No direct line-of-sight is needed. Now you can keep the doors on your entertainment center closed or have your components installed in another room or closet

Unlike other remote control extenders, you don't have to attach anything to the front of your remote control or be limited to using your remote in one room

Adds RF to your existing remote by simply installing the battery transmitter!!!!

Works with most AA and AAA remotes
Receiver has built in charger
Includes IR Emitting Eye
418 MHz

Remove the tab from the AAA battery transmitter. Push battery all the way into the sleeve.

Replace one of the AAA batteries inside your remote with the AAA transmitter.

Place the receiver in front of the audio/video and position it:

With in 10m (30') of the audio/video equipments remote sensor

Where the front of the receiver directly faces the audio/video remote sensor

Fully extend the antenna

Connect the supplied AC/DC adapter's barrel plug into receivers DC 12v jack, and then connect the adapter's AC plug to a standard AC outlet.

Remove cover on the bottom of the receiver, place extra 2/3 AAA NiMH battery (supplied in kit) in slot marked for 2/3 AAA, make sure the 3 way switch on the is in position "B" and replace cover.

Insert the Bright Eye Emitter cord plug into the receiver IR output jack on the back of the receiver.

Position the Emitter bulb facing your audio/video equipment's IR sensor.

Find the best position, remove the adhesive tape on the back of the bulb and stick it in front of the audio/video equipment sensor.

Press and hold code search until light stays lit; release.

Press Power Button repeatedly until TV turns off.

Press Enter to save.

(Repeat for VCR & Cable)

Press and hold code search until light stays lit; release.

Press Power Button repeatedly until TV turns off.

Press Enter to save.

(Repeat for VCR & Cable)

Press and hold code search until light stays lit; release.

Press Power Button repeatedly until TV turns off.

Press Enter to save.

(Repeat for VCR & Cable)

Press and hold code search until light stays lit; release.

Press Power Button repeatedly until TV turns off.

Press Enter to save.

(Repeat for VCR & Cable)

Press and hold code search until light stays lit; release.

Press Power Button repeatedly until TV turns off.

Press Enter to save.

(Repeat for VCR & Cable)

Press and hold code search until light stays lit; release.

Press Power Button repeatedly until TV turns off.

Press Enter to save.

(Repeat for VCR & Cable)

Press and hold code search until light stays lit; release.

Press Power Button repeatedly until TV turns off.

Press Enter to save.

(Repeat for VCR & Cable)

Press and hold code search until light stays lit; release.

Press Power Button repeatedly until TV turns off.

Press Enter to save.

(Repeat for VCR & Cable)

Go from room-to-room and control your components up to 100+ ft away

No direct line-of-sight is needed. Now you can keep the doors on your entertainment center closed or have your components installed in another room or closet

Unlike other remote control extenders, you don't have to attach anything to the front of your remote control or be limited to using your remote in one room

Adds RF to your existing remote by simply installing the battery transmitter!!!!

Works with most AA and AAA remotes
Receiver has built in charger
Includes IR Emitting Eye
433 MHz