Spaun NVF-110F Drop In Splitband Amplifier 10 dB Satellite Dish In-Line Signal Amp NVF110F Off-Air Antenna Aerial, 18 VDC Commercial Grade, Part # NVF-110 F

Your price: $49.95

Spaun NVF-110F Drop In Splitband Amplifier 10 dB Satellite Dish In-Line Signal Amp NVF110F Off-Air Antenna Aerial, 18 VDC Commercial Grade, Part # NVF-110 F

Drop-in splitband amplifier, line powered DC through, F-connector.

Specifications:

• Drop-In Splitband Amplifier
• Line Powered DC thru F connector
• 18 Volt DC
• Gain
  • 47...862: 10 dB
  • 950...2300: 10 dB
• Max Output:
  • Terr: -3 dBm
  • Sat-If: 6 dBm
• Noise Figure:5 dB
• Current Consumption:
  • 80 mA

Retail Price: $89.95

Our Discounted Price: $49.95

Spaun SVF-10 F In-Line Satellite Amplifier, Powered Video Signal Amplifier Splitband 10 dB for DSS DBS Satellite Dish TV Aerial Antenna CATV, Commercial Grade, Part # SVF 110F, SVF110F

Your price: $27.89

Spaun SVF-10 F In-Line Satellite Amplifier, Powered Video Signal Amplifier Splitband 10 dB for DSS DBS Satellite Dish TV Aerial Antenna CATV, Commercial Grade, Part # SVF 110F, SVF110F

This product is no longer available for purchase.

Please check out our Antenna Pre-Amplifier Section for similar products!!!!

All DC through paths are both 22 kHz tone and DiSEqC capable. Fully compatible with all DBS systems. Easy installation. All SPAUN products meet the highest standards for durability and reliability.

Specifications:

• Frequency range of amplification: 950-2050 MHz
• Gain:10 dB
• Noise figure: 4 dB
• Supply: 10,5...18 V / 40 mA
• DC through path: max. 500 mA
• DC power passive
• RF Input: F female
• RF Output: F male

Retail Price: $49.95

Our Discounted Price: $27.89

Philips SWV2116/17 4-Way Signal Amplifier 10 dB VHF/CATV 4 Output Distribution Booster 4 Port Way 75 Ohm F Connection Television Antenna Aerial, RF Broad Band, UL Listed, Part # SWV-2116/17

Your price: $13.95

Philips SWV2116/17 4-Way Signal Amplifier 10 dB VHF/CATV 4 Output Distribution Booster 4 Port Way 75 Ohm F Connection Television Antenna Aerial, RF Broad Band, UL Listed, Part # SWV-2116/17

DISTRIBUTION AMP, 10-DB VHF/FM, 4-OUTS, 50-450MHZ. 4 way amplifier broad band VHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. Eliminates the need for a four way splitter during installation. 10 decibel signal amplifier, 4 outputs. VHF/FM 75 ohm input boosted 12 decimal to one 75 ohm output. Designed to extend the system line where additional TV sets, VCR's etc, are required without loss of reception quality. UL listed. Bandwidth: 50-450 MHz, Gain: 12dB, 10dB minimum, Response: +/- 1dB. Bulk Packaged.

Retail Price: $19.95

Our Discounted Price: $13.95

Magnavox M61107 1 In 1 Out 12 dB VHF CATV RF Amp Distribution Amplifier Single Output VHF / CATV / FM Off-Air Television Aerial Antenna Broad Band Booster, Part # M-61107

Your price: $7.95

Magnavox M61107 1 In 1 Out 12 dB VHF CATV RF Amp Distribution Amplifier Single Output VHF / CATV / FM Off-Air Television Aerial Antenna Broad Band Booster, Part # M-61107

AMP 12-DB VHF/FM MAGNAVOX 1-OUTPUT, 50-450 MHZ, Distribution amplifier broad band VHF/FM, Boosts signal strength needed up to 5 times to power multiple TV sets and VCR installations. It is also recommended for long cable runs which have weak TV signals. For a greatly improved picture quality on your VHF and CATV signals. If you have any questions on your installation feel free to E-mail for help.

Retail Price: $16.95

Our Discounted Price: $7.95

Pico Macom Tru Spec 15 dB UHF/VHF/FM Amp TA-15 Signal Booster Distribution Amplifier Antenna Aerial Single Output Audio Video for Off-Air Antenna and Broad Band, F Coax Cable Connection, Part # TA15

Your price: $14.95

Pico Macom Tru Spec 15 dB UHF/VHF/FM Amp TA-15 Signal Booster Distribution Amplifier Antenna Aerial Single Output Audio Video for Off-Air Antenna and Broad Band, F Coax Cable Connection, Part # TA15

AMP 15-DB VHF/UHF/FM  1-OUTPUT, Distribution amplifier broad band VHF/UHF/FM.

• UHF / VHF / FM
• 117 VAC
• 60Hz
• 2 W
• Commercial Grade

Retail Price: $24.95

Our Discounted Price: $14.95

Vanco 20 dB Distribution Amplifier Sloped UHF VHF Adjustable Gain Indoor Off-Air Television Aerial Antenna 75 Ohm Audio Video Signal Amp, 120 VAC, Part # PV20DB

Your price: $15.95

Vanco 20 dB Distribution Amplifier Sloped UHF VHF Adjustable Gain Indoor Off-Air Television Aerial Antenna 75 Ohm Audio Video Signal Amp, 120 VAC, Part # PV20DB

This indoor distribution amplifier, manufactured by Lexon, is designed to work under almost any custom installation requirements. The adjustable gain on this amp allows the installer to tailor this amp to just the right amount of amplification.

Specifications:

• 75 Ohm Input
• 75 Ohm Output
• Max Gain: VHF-20db
• Max Gain: UHF-10db
• Bandwidth: 54-890 MHz
• Power Supply:110V~127V 60Hz

Retail Price: $39.95

Our Discounted Price: $15.95

24 dB Dual Output UHF / VHF / FM Distribution Amplifier TV Signal Magnavox M61111 Booster TV Aerial Antenna Broad Band Amp, 2 Way Audio Video, Part # M-61111

Your price: $15.95

24 dB Dual Output UHF / VHF / FM Distribution Amplifier TV Signal Magnavox M61111 Booster TV Aerial Antenna Broad Band Amp, 2 Way Audio Video, Part # M-61111

2 way amplifier broad band VHF/UHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. This amp is in blister packaging.

Retail Price: $27.95

Our Discounted Price: $15.95

Satellite Dish In-line Amplifier Signal LNB 20 dB TV Antenna Digital Booster Coax Cable DSS DBS Dish Outdoor Video Channels, 950 - 2050 MHz DC Passive, 13 - 18 VDC, Part # LAA

Your price: $2.95

Satellite Dish In-line Amplifier Signal LNB 20 dB TV Antenna Digital Booster Coax Cable DSS DBS Dish Outdoor Video Channels, 950 - 2050 MHz DC Passive, 13 - 18 VDC, Part # LAA

This is a high quality I.F. 950-2050 MHz line amplifier with up to 20dB gain at 1450MHz. This amplifier is DC passive. For long satellite cable runs. No need for separate power supply.

Retail Price: $7.95

Our Discounted Price: $2.95

UHF Distribution Amp 20 dB Winegard DA-0405 DA0405 Video Amplifier High Gain Deep Fringe Off-Air / CATV Aerial Antenna Signal, 75 Ohm Cable VHF By-Pass with F-Connectors, Low Noise, Part # DA0405

Your price: $44.95

UHF Distribution Amp 20 dB Winegard DA-0405 DA0405 Video Amplifier High Gain Deep Fringe Off-Air / CATV Aerial Antenna Signal, 75 Ohm Cable VHF By-Pass with F-Connectors, Low Noise, Part # DA0405

This product is no longer available for purchase.

It has been replaced by the Eagle Aspen POST-AMP Signal Booster!!!!

High gain, low noise distribution amplifier designed for use in deep fringe UHF signal areas. The very low noise figure of the DA-0405 provides UHF pictures where other amplifiers would only make the snow brighter. Input and output are through 75 ohm. F-type connections. VHF signals are bypassed with negligible loss.

Regular Price: $69.95

Our Discounted Price: $44.95

30 dB Distribution Amplifier Broadband 54-1000 MHz Frequency Range Drop Channel CATV 2-78 TV Signal Amp Adjustable Gain Home Television Antenna Aerial Low Noise 1 GHz Signal, CableTronix, Part # CTA-30A

Your price: $34.95

30 dB Distribution Amplifier Broadband 54-1000 MHz Frequency Range Drop Channel CATV 2-78 TV Signal Amp Adjustable Gain Home Television Antenna Aerial Low Noise 1 GHz Signal, CableTronix, Part # CTA-30A

The new CTA-30A has been specifically designed for the higher end home distribution market where a flat, full bandwidth amp is required. The low noise and high output capability makes this amplifier ideal for systems with either the weakest or strongest input signals. The IC amplifiers offer both advanced reliability as well as a higher return loss which insures the continued flatness within the distribution system.

Specifications:

• 1 GHz Bandwidth
• Gain: 30 dB
• Low noise figure: 4 dB
• High output capability
• Adjustable knob to control gain
• Flat frequency response to 1 GHz
• Uses IC amplifiers for greater reliability
• Switchable FM trap
• Frequency range: 54-1000 MHz
• Flatness: +/- 1 dB
• Gain: 30 dB
• Gain adjust range: 8 dB
• Output Power: 25 dBmV
• Input capability: 15-23 dB
• Output capability: 45 dB max (7 channels)
• FM notch depth: 0/25 dB (54-450 MHz)

Retail Price: $59.95

Our Discounted Price: $34.95

3-Way RCA Composite Stereo Audio Video Distribution Amplifier AntennaCraft 10G203 3 Set Way AV Stereo Port with Built-In Power Supply, 1 Input and 3 Output, Permacolor, Part # 10G-203

Your price: $22.95

3-Way RCA Composite Stereo Audio Video Distribution Amplifier AntennaCraft 10G203 3 Set Way AV Stereo Port with Built-In Power Supply, 1 Input and 3 Output, Permacolor, Part # 10G-203

This product is no longer available for purchase.

It has been replaced by the Digiwave DGS-CA101 Distribution Amp !!!!

Splits video and stereo audio output signals from VCR and other video source to as many as three other VCRs or monitors without signal loss. Great for use with multi-VCRs, surveillance camera setups, or camcorder to VCR dubbing setups. Helps prevent signal loss from long cable runs.

Permacolor 3-Set Audio Video Distribution Amplifier. Splits video and stereo audio output from VCR or other video to up to three other VCRs or monitors without signal loss from long cable runs. Great for multi-VCRs, surveillance camera, camcorder to VCR dubbing setups AC operation, UL Listed.

Specifications:

• 1.5V Power Passing
• 75 Ohm
• 10 Hz - 10 MHz

Retail Price: $39.95

Our Discounted Price: $22.95

Winegard HDA-100 15 dB Distribution Amplifier HDA100 Signal Digital / Analog Broadcast Off-Air Antenna Aerial Video Amp with RF Input, 12VDC Industrial Weather Resistant Design, Part # HDA100

Your price: $33.85

Winegard HDA-100 15 dB Distribution Amplifier HDA100 Signal Digital / Analog Broadcast Off-Air Antenna Aerial Video Amp with RF Input, 12VDC Industrial Weather Resistant Design, Part # HDA100

Clearly the Worlds Best!!!

Winegard's new HDA series of Distribution Amplifiers was designed to meet the market demand for a heavy duty, quality built, cost effective solution for the amplification and distribution of analog/digital broadcast signals from Off-Air and cable TV stations. The HDA-100 is housed in an industrial grade, weather resistant enclosure. Each unit has an RF input, amplifier also provides a 5 - 42 MHz 2-way bi-pass.

The Winegard HDA-100 is a single RF input, 15 dB gain, single RF output, with a 5 - 42 MHz 2-way bi-pass at -2 dB loss.

Specifications:

• Bandpass Forward: 54 - 1000 MHz
• Bandpass Reverse: 5 - 42 MHz
• Gain: 15 dB
• Reverse Gain: -2 dB
• Noise Figure: 3 dB
• Power Supply Voltage: 12VDC - 200mA

Retail Price: $89.95

Our Discounted Price: $33.85

Winegard HDA-200 24 dB Distribution Amplifier HDA200 Digital / Analog Broadcast Bi-Directional Signal Off-Air Television Antenna Aerial Video Amp, RF Input, Switchable FM Trap, 12VDC Power Supply, Weather Resistant, Part # HDA200

Your price: $39.95

Winegard HDA-200 24 dB Distribution Amplifier HDA200 Digital / Analog Broadcast Bi-Directional Signal Off-Air Television Antenna Aerial Video Amp, RF Input, Switchable FM Trap, 12VDC Power Supply, Weather Resistant, Part # HDA200

This Winegard Distribution Amp is currently out of stock.

We are substituting it with the CableTronix CT-BDA24 Distribution Amplifier !!!!

Winegard's new HDA series of Distribution Amplifiers was designed to meet the market demand for a heavy duty, quality built, cost effective solution for the amplification and distribution of analog/digital broadcast signals from Off-Air and cable TV stations. The HDA-200 is housed in an industrial grade, weather resistant enclosure. Each unit has an RF input, amplifier also provides a 5 - 42 MHz 2-way bi-pass.

The Winegard HDA-200 has a single RF input, 24 dB gain, single RF output, with a 5 - 42 MHz 2-way bi-pass at +12 dB. The HDA-200 has 0 - 18 dB gain control and 20 dB "switchable" FM trap to eliminate those offending FM radio stations. These features, when combined with the 12 dB of amplified gain for the 2 way 5 - 42 MHz return path make the HDA-200 a superior solution for the "Techno" savvy consumer.

Includes:

• Power Supply: 12VDC - 200mA
• Winegard HDA-PSI 2 Way Splitter

Specifications:

• Bandpass Forward: 54 - 1000 MHz
• Bandpass Reverse: 5 - 42 MHz
• Gain: 24 dB
• Gain Control: 0 - 18 dB
• Reverse Gain: +12 dB
• Variable Gain: 0 dB - 18 dB
• Noise Figure: 4.5 dB (at Max Gain)
• FM Trap: -20 dB (95 - 108 MHz)
• (1) HDA-PSI Power Inserter
• (1) 12 VDC Power Supply

Retail Price: $79.95

Our Discounted Price: $39.95

Channel Master 3042 Single Output Indoor Distribution 13 dB Amplifier CM3042 Off-Air TV Aerial Antenna Local Cable Video Signal Booster / Amp, 1 Output, 75 Ohm 120 VAC, Part # CM-3042

Your price: $22.95

Channel Master 3042 Single Output Indoor Distribution 13 dB Amplifier CM3042 Off-Air TV Aerial Antenna Local Cable Video Signal Booster / Amp, 1 Output, 75 Ohm 120 VAC, Part # CM-3042

This product is no longer available for purchase.

It has been replaced by the Channel Master 3412 Amplifier!!!!

Ideal for Amplifying Weak Antenna Cable Signals!!!

Specifications:

• 1 Output
• Frequency Range: 50-900 MHz
• Return Path: 5-42 MHz
• Amplifier Gain 13 dB
• Gain Each Output: 13 dB
• Noise Figure: 3.5 dB
• Impedance: 75 ohm
• Max. Output per Channel: 30 dBmV
• Operating Voltage: 105-129 VAC

Retail Price: $49.95

Our Discounted Price: $22.95

Channel Master 3044 22 dB Four Output Indoor Distribution Amplifier CM3044 TV Aerial Antenna Video Signal Booster / Amp, 75 Ohm 120 VAC, 4 Output, Part # CM-3044

Your price: $26.95

Channel Master 3044 22 dB Four Output Indoor Distribution Amplifier CM3044 TV Aerial Antenna Video Signal Booster / Amp, 75 Ohm 120 VAC, 4 Output, Part # CM-3044

This product is no longer available for purchase.

It has been replaced by the Channel Master 3414 Amplifier!!!!

Handles all cable and UHF/VHF/FM off-air signals, including return path. Allows for distribution of amplified signals up to 4 TV sets or other video equipment without the use of additional splitters. Works with cable modems. For indoor use only. Simple to install.

Specifications:

• 4 Output
• Frequency Range: 50-900 MHz
• Return Path: 5-42 MHz
• Amplifier Gain 22 dB
• Gain Each Output: 8 dB
• Noise Figure: 3.5 dB
• Impedance: 75 ohm
• Isolation Between Ports: 24 dB
• Max. Output per Channel: 23 dBmV (@ 36 Channels)
• Operating Voltage: 105-129 VAC

Retail Price: $59.95

Our Discounted Price: $26.95

Channel Master 3043 22 dB Dual Output Indoor Distribution Amplifier CM3043 TV Antenna Signal Off-Air Aerial Local Cable Video Booster, 2 Output, 75 Ohm 120 VAC, Part # CM-3043

Your price: $22.95

Channel Master 3043 22 dB Dual Output Indoor Distribution Amplifier CM3043 TV Antenna Signal Off-Air Aerial Local Cable Video Booster, 2 Output, 75 Ohm 120 VAC, Part # CM-3043

This product is no longer available for purchase.

It has been replaced by the Channel Master 3412 Amplifier!!!!

Allows distribution of amplified signals to 2, 4, or 8 TV sets without added splitters. Return Path for cable modem applications.

Specifications:

• 2 Output
• Frequency Range: 50-900 MHz
• Return Path: 5-42 MHz
• Amplifier Gain 13 dB
• Gain Each Output: 10 dB
• Noise Figure: 3.5 dB
• Impedance: 75 ohm
• Isolation Between Ports: 24 dB
• Max. Output per Channel: 25 dBmV
• Operating Voltage: 105-129 VAC

Retail Price: $45.95

Our Discounted Price: $22.95

15 dB Bi-Directional Distribution Drop Amplifier Digital Multi-Media RF Cable Internet HDTV 1 GHz Passive Return for TV Antenna / CATV / Network, 54-1000 MHz Forward and 5-42 Reverse, Part # CableTronix CTHDA-1P

Your price: $36.95

15 dB Bi-Directional Distribution Drop Amplifier Digital Multi-Media RF Cable Internet HDTV 1 GHz Passive Return for TV Antenna / CATV / Network, 54-1000 MHz Forward and 5-42 Reverse, Part # CableTronix CTHDA-1P

This product is no longer available for purchase.

It has been replaced by the Channel Master CM-3410!!!!

Rejuvenate Your Cable applications, whether it is digital cable or your cable internet connection that has slowed down!

Specifications:

• Input Ports 1
• Output Ports 1
• Forward Path 54-1,000 MHz
• Reverse Path 5-42 MHz
• Forward Gain 13.5dB
• Reverse Gain (Loss) -1.6dB
• Noise Figure 3dB Typical, 4dB Max
• Return Loss (In-out) 18dB Typical
• Power Supply Voltage 12-16V, 200mA
• Surge Protection (All ports) 6KV Connections F Type Female Impedance 75 Ohms
• Operating Temperature -40C to +60C

Retail Price: $69.95

Our Discounted Price: $36.95

Vanco SILA-20 20 dB In-Line Amplifier Satellite 16 dB - 20 LNB Booster Signal 2.5 GHz Fixed Slope Satellite Signal Inline Amp Dish TV Video DSS DBS Digital Antenna Channel Strength, 950-2150 MHz, Part # SILA20

Your price: $2.95

Vanco SILA-20 20 dB In-Line Amplifier Satellite 16 dB - 20 LNB Booster Signal 2.5 GHz Fixed Slope Satellite Signal Inline Amp Dish TV Video DSS DBS Digital Antenna Channel Strength, 950-2150 MHz, Part # SILA20

This is a high quality fixed slope in-line signal amplifier 950-2150 MHz line booster amp with up to 20 dB gain. For long satellite cable runs. No need for separate power supply. Commercial Grade.

Retail Price: $4.95

Our Discounted Price: $2.95

Perfect Vision PVAMP1 Satellite Signal In-line Amplifier Booster 20 dB 950-2150 MHz LNB Dish TV Video DSS DBS Digital Antenna Coaxial Cable Run Channel Strength, 13 - 18 VDC, Part # Perfect PVAMP1

Your price: $3.89

Perfect Vision PVAMP1 Satellite Signal In-line Amplifier Booster 20 dB 950-2150 MHz LNB Dish TV Video DSS DBS Digital Antenna Coaxial Cable Run Channel Strength, 13 - 18 VDC, Part # Perfect PVAMP1

This is a high quality I.F. 950-2250 MHz line amplifier with up to 20 dB gain. For long satellite cable runs. No need for separate power supply. Also amplifies frequencies from 10 to 2250 dB.

Retail Price: $9.95

Our Discounted Price: $3.89

Digital Distribution Amplifier HDTV CATV Off-Air Bi-Directional Signal Low Noise HDA-200 RF 24 dB Amp Analog HDA200 with Adjustable Gain 24 dB 54-1000 MHz Forward and 12 dB 5-42 MHz Reverse, 1GHz, Part # CT-BDA24

Your price: $39.95

Digital Distribution Amplifier HDTV CATV Off-Air Bi-Directional Signal Low Noise HDA-200 RF 24 dB Amp Analog HDA200 with Adjustable Gain 24 dB 54-1000 MHz Forward and 12 dB 5-42 MHz Reverse, 1GHz, Part # CT-BDA24

Specifications:

• Forward Path 54-1,000 MHz
• Reverse Path 5-42 MHz
• Adjustable Gain
• Forward Gain 24dB
• Reverse Gain (Loss) 12dB
• Noise Figure 3dB Typical, 4dB Max
• Return Loss (In-out) 20dB Typical, 18 dB Max
• Power Supply Voltage 12V, 200mA
• Surge Protection (All ports) 6KV Connections F Type Female
• Impedance 75 Ohms
• Operating Temperature -40C to +60C
• FM Trap

Retail Price: $79.95

Our Discounted Price: $39.95

AntennaCraft 10G203 3 Set Way Audio Video Distribution Amplifier AV RCA Composite Stereo Port with Built-In Power Supply, 1 Input and 3-Set Picture Output, Multi-Monitor Viewing, Permacolor, Part # 10G-203

Your price: $22.95

AntennaCraft 10G203 3 Set Way Audio Video Distribution Amplifier AV RCA Composite Stereo Port with Built-In Power Supply, 1 Input and 3-Set Picture Output, Multi-Monitor Viewing, Permacolor, Part # 10G-203

This product is no longer available for purchase.

It has been replaced by the Digiwave DGS-CA101 Distribution Amp !!!!

Splits video and stereo audio output signals from VCR and other video source to as many as three other VCRs or monitors without signal loss. Great for use with multi-VCRs, surveillance camera setups, or camcorder to VCR dubbing setups. Helps prevent signal loss from long cable runs.

Permacolor 3-Set Audio Video Distribution Amplifier. Splits video and stereo audio output from VCR or other video to up to three other VCRs or monitors without signal loss from long cable runs. Great for multi-VCRs, surveillance camera, camcorder to VCR dubbing setups AC operation, UL Listed.

Specifications:

• 1.5V Power Passing
• 75 Ohm
• 10 Hz - 10 MHz

Retail Price: $39.95

Our Discounted Price: $22.95

4 Way Distribution Amplifier AV Component Stereo RCA Plug Connection Audio Video 1x4 with Built-In Power Supply, 1 Input and 4-Set Output, Multi-Monitor Viewing, CableTronix, Cable Tronix, Part # CT-AV1X4

Your price: $25.95

4 Way Distribution Amplifier AV Component Stereo RCA Plug Connection Audio Video 1x4 with Built-In Power Supply, 1 Input and 4-Set Output, Multi-Monitor Viewing, CableTronix, Cable Tronix, Part # CT-AV1X4

This product is no longer available for purchase.

It has been replaced by the Digiwave DGS-CA101 Distribution Amp !!!!

Easily Split 1 Audio Video Signal into 4 Audio Video Signals!!!

Splits video and stereo audio output signals from VCR and other video source to as many as four other VCRs or monitors without signal loss. Great for use with multi-VCRs, surveillance camera setups, or camcorder to VCR dubbing setups. Helps prevent signal loss from long cable runs.

CableTronix 4-Set Audio Video Distribution Amplifier. Splits video and stereo audio output from VCR or other video to up to four other VCRs or monitors without signal loss from long cable runs. Great for multi-VCRs, surveillance camera, camcorder to VCR dubbing setups AC operation, UL Listed.

Specifications:

• 4 Video Outputs
• 4 Left / Right Audio Outputs
• Input Voltage: 120V AC 60Hz
• Output Voltage: 15V DC 150mA
• Class 2 Power Unit
• AC/DC Adapter Included

Retail Price: $59.95

Our Discounted Price: $25.95

Steren 4 Way Out Put Signal Cable Amplifier VHF/CATV 10 dB Booster Distribution Amplifier UL Listed Four Port Signal Output 75 Ohm F Connection Television Antenna Aerial, RF Broad Band

Your price: $8.95

Steren 4 Way Out Put Signal Cable Amplifier VHF/CATV 10 dB Booster Distribution Amplifier UL Listed Four Port Signal Output 75 Ohm F Connection Television Antenna Aerial, RF Broad Band

DISTRIBUTION AMP, 10-DB VHF/FM, 4-OUTS, 50-450MHZ. 4 way amplifier broad band VHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. Eliminates the need for a four way splitter during installation. 10 decibel signal amplifier, 4 outputs. VHF/FM 75 ohm input boosted 12 decimal to one 75 ohm output. Designed to extend the system line where additional TV sets, VCR's etc, are required without loss of reception quality. UL listed. Bandwidth: 50-450 MHz, Gain: 12dB, 10dB minimum, Response: +/- 1dB. Bulk Packaged.

Retail Price: $19.95

Our Discounted Price: $8.95

Pico Macom 20 dB Satellite Amp Ch 2 - 158 IF Inline 950 - 2150 MHz Signal Booster In-Line 13 - 20 Volt Amp LNB Dish TV Video DSS DBS Antenna Coaxial Cable Slope Compensated, Part # SA-2050+, SA2050

Your price: $6.75

Pico Macom 20 dB Satellite Amp Ch 2 - 158 IF Inline 950 - 2150 MHz Signal Booster In-Line 13 - 20 Volt Amp LNB Dish TV Video DSS DBS Antenna Coaxial Cable Slope Compensated, Part # SA-2050+, SA2050

Pico Macom SA-2050+ 950-2200 MHz in-line amplifier designed to amplify the signal between the LNB and the receiver for long drops. Slope compensated, the signal 18 dB at 1450 MHz. Housed in a heavy duty solder-back case. Powered by the receiver and passed through to the LNB.

Specifications:

• SA-2050+ In-Line Amplifier, Slope Compensated
• Frequency: 950-2150 MHz
• 950 MHz Gain: 13.0 dB
• 1200 MHz Gain: 14.5 dB
• 1450 MHz Gain: 16.0 dB
• 1750 MHz Gain: 17.0 dB
• 2050 MHz Gain: 19.0 dB
• 2150 MHz Gain: 19.5 dB
• Noise Figure: < 6 dB (typ.)
• Max Output Range: 8 dB
• Input and Output Impedance: 75 ?
• Input and Output Connectors: F-Female
• Operating Voltage: 16 ? 3 VDC
• Power Consumption: 50 mA (typ.)
• Power Passing: 1000 mA
• RFI Shielding: > 100 dB

Retail Price: $11.95

Our Discounted Price: $6.75

Channel Master 3045 Multi-Set Indoor Distribution Amplifier with Return Path CM3045 8 Output Distribution Amp Off-Air Antenna HDTV Local Signal Television Aerial Booster, Part # CM-3045

Your price: $44.95

Channel Master 3045 Multi-Set Indoor Distribution Amplifier with Return Path CM3045 8 Output Distribution Amp Off-Air Antenna HDTV Local Signal Television Aerial Booster, Part # CM-3045

8 Port Multimedia Drop Signal Amplifier by PCT!!!

PCT's new miniature MA2 drop amplifier series features improved performance and ultra-low noise amplification of broadband signals for subscriber drop installations. The MA2 series provides better return loss performance, enhanced shielding protection, and IEEE B3 6kV, 3000 amp combination wave surge withstand on all ports for superior lighting protection. All "F" ports also include PCT's patented Digital Seizure Mechanism (DSM) for superior center conductor retention, electrical performance, and additional protection against transient surges.

Features:

• Minimal Signal Degradation
• Superior Seizure Technology
• Lightweight Powder Coated / Weather Sealed Corrosion Protected Housing
• 6kV, 3kA Combination  Wave (B3) Surge on all "F" Ports
• DSM Seizure Technology Provides Better Performance than 360 Degree Contacts
• "PWR IN" F-Port with Power Adapter
• Blocking Capacitors Standard on all Ports
• LED Power Indicator Light
• Operating Temperature: -40 F to +140 F
• Includes: 3' FT Power Cable
• Includes: Power Inserter
• Includes: AC/DC Power Transformer
  • Input: 120 VAC 60 Hz 100 mA
  • Output: 15 VDC 250 mA

Forward Path Specifications:

• Forward Path Frequency Range: 54 - 1,000 MHz
• Typical Gain (Per Output Port): 3.3 dB
• Rated Output Level (dBmV), Channels Flat: 13.3 @ 80
• Output Port-to-Port Isolation: 15 - 42 MHz: 30 dB
• Output Port-to-Port Isolation: 54 - 1000 MHz: 25 dB
• RF Amplification Device IC - GaAS HBT
• Passband Response: +- 0.5 dB
• Noise Figure @ 70 F: 3.6 dB
• Return Loss, All Ports: 20dB (Min.)
• Composite Second Order Distortions: < -62 dBc
• Composite Triple Beat Distortions: < -75 dBc
• Cross Modulation Distortions: < -75 dBc
• Hum Modulation: < -75 dBc
• Group Delay (ns) @ 54 - 60 MHz: < 20/3.58 MHz
• Group Delay (ns) @ 60 - 1000 MHz: < 5/3.58 MHz
• Shielding Effectiveness (RFI): >110 dB
• Nominal Impedance: 75 Ohm

Passive Return Path Specifications:

• Return Path Frequency Range: 5 - 42 MHz
• Passive Return Insertion Loss: -11.7 dB
• Passband Response: +- 0.5 dB
• Return Loss: 20dB (Min.)
• Group Delay (ns) @ 5 - 6.5 MHz: < 20/1 MHz
• Group Delay (ns) @ 6.5 - 40 MHz: < 5/1 MHz
• Group Delay (ns) @ 40 - 42 MHz: < 20/1 MHz
• HUM Modulation: < -75 dBc
• Nominal Impedance: 75 Ohm

Retail Price: $74.95

Our Discounted Price: $44.95

Philips USA PH61111 24 dB Dual Output UHF / VHF / FM Amplifier Distribution TV Signal Booster TV Aerial Antenna Broad Band Amp, 2 Way Audio Video, Part # PH-61111

Your price: $6.58

Philips USA PH61111 24 dB Dual Output UHF / VHF / FM Amplifier Distribution TV Signal Booster TV Aerial Antenna Broad Band Amp, 2 Way Audio Video, Part # PH-61111

2 way amplifier broad band VHF/UHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. This item may be substituted upon order fulfillment.

Retail Price: $19.95

Our Discounted Price: $6.58

Gemini 20 / 24 dB Dual Output Amplifier Distribution UHF / VHF / FM HD Signal Booster Amp TV Aerial Antenna Broad Band Amp, 2 Way Audio Video, Part # 61111

Your price: $12.89

Gemini 20 / 24 dB Dual Output Amplifier Distribution UHF / VHF / FM HD Signal Booster Amp TV Aerial Antenna Broad Band Amp, 2 Way Audio Video, Part # 61111

2 way amplifier broad band VHF/UHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. This item may be substituted upon order fulfillment.

Retail Price: $29.95

Our Discounted Price: $12.89

15 dB Amplifier Signal Distribution Booster Amp Eagle Aspen 15-GX UHF / VHF / FM Antenna Aerial Single Output Audio Video Broad Band, Part # DISTAMP-15GX

Your price: $12.39

15 dB Amplifier Signal Distribution Booster Amp Eagle Aspen 15-GX UHF / VHF / FM Antenna Aerial Single Output Audio Video Broad Band, Part # DISTAMP-15GX

Eagle Aspen DISTAMP-15-GX 15-DB VHF/UHF/FM 1-OUTPUT, Video Distribution Signal amplifier for antenna and broad band. The DISTAMP-15-GX is a full spectrum, high output amplifier for small CATV or low distortion applications where performance and reliability are required.

Specifications:

• 15 dB High Output Distribution Amplifier
• UHF / VHF / FM
• 1 Output
• 54 - 860 MHz Bandwidth
• Commercial Grade

Retail Price: $24.95

Our Discounted Price: $12.39

20 - 25 dB Amplifier Signal Distribution Booster Amp with Switchable FM Trap Eagle Aspen 25-GX High Output UHF / VHF / FM Antenna Aerial Single Output Audio Video Broad Band, Part # DISTAMP-25GX

Your price: $11.95

20 - 25 dB Amplifier Signal Distribution Booster Amp with Switchable FM Trap Eagle Aspen 25-GX High Output UHF / VHF / FM Antenna Aerial Single Output Audio Video Broad Band, Part # DISTAMP-25GX

Eagle Aspen DISTAMP-25-GX 25-DB VHF/UHF/FM 1-OUTPUT, Video Distribution FM Trap Signal amplifier for antenna and broad band. The DISTAMP-25-GX is a full spectrum, high output amplifier for small CATV or low distortion applications where performance and reliability are required.

Specifications:

• 25 dB High Output UHF / VHF / FM Distribution Amplifier
• Single Output
• Low Noise:
  • VHF: 6 dB
  • UHF: 7 dB
• Bandwidth: 54 - 860 MHz
• FM Trap: -25 dB @ 95 - 108 MHz
• Commercial Grade

Retail Price: $19.95

Our Discounted Price: $11.95

Channel Master 5113IFD Satellite IF In-line Amplifier 13 dB Booster 2 GHz 950 - 2150 with Cable Slope Compensation Commercial Grade Dish TV DSS DBS Digital Antenna Coaxial Run Channel Strength, Part # 5113 IFD

Your price: $2.95

Channel Master 5113IFD Satellite IF In-line Amplifier 13 dB Booster 2 GHz 950 - 2150 with Cable Slope Compensation Commercial Grade Dish TV DSS DBS Digital Antenna Coaxial Run Channel Strength, Part # 5113 IFD

Get the BEST for LESS with Channel Master!!!

The 5113IFD is a general purpose, low cost satellite IF line amplifier with a 14dB gain at 1450MHz and appropriate gain between 950 and 2150 MHz to give cable slope compensation. Typical applications include Long runs (greater than 100 feet) from receiver to LNB, a satellite IF distribution system where signal has become marginal at the end of the system or prior to splitting a signal to prevent excessive loss. Not designed to be cascaded. Frequency: 950-2150 MHz.

Retail Price: $6.95

Our Discounted Price: $2.95

10 dB 4-Way Video Signal Amplifier / Splitter VHF/CATV Distribution Amplifier UL Listed 4 Output Signal Philips M61116 4 Port Output 75 Ohm Television Antenna Aerial Booster, RF Broad Band, Part # M-61116

Your price: $10.79

10 dB 4-Way Video Signal Amplifier / Splitter VHF/CATV Distribution Amplifier UL Listed 4 Output Signal Philips M61116 4 Port Output 75 Ohm Television Antenna Aerial Booster, RF Broad Band, Part # M-61116

DISTRIBUTION AMP, 10-DB VHF/FM, 4-OUTS, 50-450MHZ. 4 way amplifier broad band VHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. Eliminates the need for a four way splitter during installation. 10 decibel signal amplifier, 4 outputs. VHF/FM 75 ohm input boosted 12 decimal to one 75 ohm output. Designed to extend the system line where additional TV sets, VCR's etc, are required without loss of reception quality. UL listed. Bandwidth: 50-450 MHz, Gain: 12dB, 10dB minimum, Response: +/- 1dB. Bulk Packaged.

Retail Price: $19.95

Our Discounted Price: $10.79

Philips PH61116 10 dB UL Listed 4 Output Signal Amplifier Video Distribution Splitter Amp VHF/CATV 4 Way Signal Booster 4 Port 75 Ohm F Connection Television Antenna Aerial, RF Broad Band, Part # PH-61116

Your price: $9.79

Philips PH61116 10 dB UL Listed 4 Output Signal Amplifier Video Distribution Splitter Amp VHF/CATV 4 Way Signal Booster 4 Port 75 Ohm F Connection Television Antenna Aerial, RF Broad Band, Part # PH-61116

DISTRIBUTION AMP, 10-DB VHF/FM, 4-OUTS, 50-450MHZ. 4 way amplifier broad band VHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. Eliminates the need for a four way splitter during installation. 10 decibel signal amplifier, 4 outputs. VHF/FM 75 ohm input boosted 12 decimal to one 75 ohm output. Designed to extend the system line where additional TV sets, VCR's etc, are required without loss of reception quality. UL listed. Bandwidth: 50-450 MHz, Gain: 12dB, 10dB minimum, Response: +/- 1dB. Bulk Packaged.

Retail Price: $19.95

Our Discounted Price: $9.79

Bi-Directional Amplifier 15 dB CATV Drop Distribution Amp Digital Multi-Media RF Cable Internet HDTV 1 GHz Passive Return for Antenna / Network, 54-1000 MHz Forward and 5-42 Reverse, Part # CableTronix CTHDA-1P

Your price: $36.95

Bi-Directional Amplifier 15 dB CATV Drop Distribution Amp Digital Multi-Media RF Cable Internet HDTV 1 GHz Passive Return for Antenna / Network, 54-1000 MHz Forward and 5-42 Reverse, Part # CableTronix CTHDA-1P

This product is no longer available for purchase.

It has been replaced by the Channel Master CM-3410!!!!

Rejuvenate Your Cable applications, whether it is digital cable or your cable internet connection that has slowed down!

Specifications:

• Input Ports 1
• Output Ports 1
• Forward Path 54-1,000 MHz
• Reverse Path 5-42 MHz
• Forward Gain 13.5dB
• Reverse Gain (Loss) -1.6dB
• Noise Figure 3dB Typical, 4dB Max
• Return Loss (In-out) 18dB Typical
• Power Supply Voltage 12-16V, 200mA
• Surge Protection (All ports) 6KV Connections F Type Female Impedance 75 Ohms
• Operating Temperature -40C to +60C

Retail Price: $69.95

Our Discounted Price: $36.95

4 Way Component Video Distribution Amplifier Audio Stereo RCA Plug Connection 1x4 with Built-In Power Supply, 1 Input and 4-Set Output, Multi-Monitor Viewing, CableTronix, Part # CT-AV1X4

Your price: $25.95

4 Way Component Video Distribution Amplifier Audio Stereo RCA Plug Connection 1x4 with Built-In Power Supply, 1 Input and 4-Set Output, Multi-Monitor Viewing, CableTronix, Part # CT-AV1X4

This product is no longer available for purchase.

It has been replaced by the Digiwave DGS-CA101 Distribution Amp !!!!

Easily Split 1 Audio Video Signal into 4 Audio Video Signals!!!

Splits video and stereo audio output signals from VCR and other video source to as many as four other VCRs or monitors without signal loss. Great for use with multi-VCRs, surveillance camera setups, or camcorder to VCR dubbing setups. Helps prevent signal loss from long cable runs.

CableTronix 4-Set Audio Video Distribution Amplifier. Splits video and stereo audio output from VCR or other video to up to four other VCRs or monitors without signal loss from long cable runs. Great for multi-VCRs, surveillance camera, camcorder to VCR dubbing setups AC operation, UL Listed.

Specifications:

• 4 Video Outputs
• 4 Left / Right Audio Outputs
• Input Voltage: 120V AC 60Hz
• Output Voltage: 15V DC 150mA
• Class 2 Power Unit
• AC/DC Adapter Included

Retail Price: $59.95

Our Discounted Price: $25.95

Philips PH61107 12 dB VHF/CATV Signal Amplifier 75 Ohm Booster 1 IN One Output Single Distribution Amp 12dB TV Booster Off-Air Television Aerial Signal Amp, Part # PH-61107

Your price: $8.45

Philips PH61107 12 dB VHF/CATV Signal Amplifier 75 Ohm Booster 1 IN One Output Single Distribution Amp 12dB TV Booster Off-Air Television Aerial Signal Amp, Part # PH-61107

AMP 12-DB VHF/FM PHILIPS 1-OUTPUT, 50-450 MHZ, Distribution amplifier broad band VHF/FM, Boosts signal strength needed up to 5 times to power multiple TV sets and VCR installations. It is also recommended for long cable runs which have weak TV signals. For a greatly improved picture quality on your VHF and CATV signals. If you have any questions on your installation feel free to E-mail for help.

Retail Price: $16.95

Our Discounted Price: $8.45

Gemini PH61107 12 dB Signal Amplifier VHF CATV Single Output Video Amp Splitter VHF/CATV 12dB Distribution Amplifier UL Listed 1 Port Output 75 Ohm Television Antenna Aerial Booster, Part # PH-61107

Your price: $9.95

Gemini PH61107 12 dB Signal Amplifier VHF CATV Single Output Video Amp Splitter VHF/CATV 12dB Distribution Amplifier UL Listed 1 Port Output 75 Ohm Television Antenna Aerial Booster, Part # PH-61107

AMP 12-DB VHF/FM PHILIPS 1-OUTPUT, 50-450 MHZ, Distribution amplifier broad band VHF/FM, Boosts signal strength needed up to 5 times to power multiple TV sets and VCR installations. It is also recommended for long cable runs which have weak TV signals. For a greatly improved picture quality on your VHF and CATV signals. If you have any questions on your installation feel free to E-mail for help.

Retail Price: $16.95

Our Discounted Price: $9.95

8 Output Signal Distribution Amplifier Multimedia Channel Master 8 Port Drop Bi Directional Digital Multi-Media 5-42 / 54-1002 MHz Passive Return with Power Inserter for TV Antenna / CATV / Network, Part # PCT MA2-8P

Your price: $39.95

8 Output Signal Distribution Amplifier Multimedia Channel Master 8 Port Drop Bi Directional Digital Multi-Media 5-42 / 54-1002 MHz Passive Return with Power Inserter for TV Antenna / CATV / Network, Part # PCT MA2-8P

8 Port Multimedia Drop Signal Amplifier by PCT!!!

PCT's new miniature MA2 drop amplifier series features improved performance and ultra-low noise amplification of broadband signals for subscriber drop installations. The MA2 series provides better return loss performance, enhanced shielding protection, and IEEE B3 6kV, 3000 amp combination wave surge withstand on all ports for superior lighting protection. All "F" ports also include PCT's patented Digital Seizure Mechanism (DSM) for superior center conductor retention, electrical performance, and additional protection against transient surges.

Features:

• Minimal Signal Degradation
• Superior Seizure Technology
• Lightweight Powder Coated / Weather Sealed Corrosion Protected Housing
• 6kV, 3kA Combination  Wave (B3) Surge on all "F" Ports
• DSM Seizure Technology Provides Better Performance than 360 Degree Contacts
• "PWR IN" F-Port with Power Adapter
• Blocking Capacitors Standard on all Ports
• LED Power Indicator Light
• Operating Temperature: -40 F to +140 F
• Includes: 3' FT Power Cable
• Includes: Power Inserter
• Includes: AC/DC Power Transformer
  • Input: 120 VAC 60 Hz 100 mA
  • Output: 15 VDC 250 mA

Forward Path Specifications:

• Forward Path Frequency Range: 54 - 1,000 MHz
• Typical Gain (Per Output Port): 3.3 dB
• Rated Output Level (dBmV), Channels Flat: 13.3 @ 80
• Output Port-to-Port Isolation: 15 - 42 MHz: 30 dB
• Output Port-to-Port Isolation: 54 - 1000 MHz: 25 dB
• RF Amplification Device IC - GaAS HBT
• Passband Response: +- 0.5 dB
• Noise Figure @ 70 F: 3.6 dB
• Return Loss, All Ports: 20dB (Min.)
• Composite Second Order Distortions: < -62 dBc
• Composite Triple Beat Distortions: < -75 dBc
• Cross Modulation Distortions: < -75 dBc
• Hum Modulation: < -75 dBc
• Group Delay (ns) @ 54 - 60 MHz: < 20/3.58 MHz
• Group Delay (ns) @ 60 - 1000 MHz: < 5/3.58 MHz
• Shielding Effectiveness (RFI): >110 dB
• Nominal Impedance: 75 Ohm

Passive Return Path Specifications:

• Return Path Frequency Range: 5 - 42 MHz
• Passive Return Insertion Loss: -11.7 dB
• Passband Response: +- 0.5 dB
• Return Loss: 20dB (Min.)
• Group Delay (ns) @ 5 - 6.5 MHz: < 20/1 MHz
• Group Delay (ns) @ 6.5 - 40 MHz: < 5/1 MHz
• Group Delay (ns) @ 40 - 42 MHz: < 20/1 MHz
• HUM Modulation: < -75 dBc
• Nominal Impedance: 75 Ohm

Retail Price: $74.95

Our Discounted Price: $39.95

Channel Master 8-Way Signal Distribution Amplifier TV RF Output Booster Amp Multimedia 8 Port Drop Bi Directional Digital Multi-Media 5-42 / 54-1002 MHz Passive Return, Part # PCT MA2-8P

Your price: $44.95

Channel Master 8-Way Signal Distribution Amplifier TV RF Output Booster Amp Multimedia 8 Port Drop Bi Directional Digital Multi-Media 5-42 / 54-1002 MHz Passive Return, Part # PCT MA2-8P

8 Port Multimedia Drop Signal Amplifier by PCT!!!

PCT's new miniature MA2 drop amplifier series features improved performance and ultra-low noise amplification of broadband signals for subscriber drop installations. The MA2 series provides better return loss performance, enhanced shielding protection, and IEEE B3 6kV, 3000 amp combination wave surge withstand on all ports for superior lighting protection. All "F" ports also include PCT's patented Digital Seizure Mechanism (DSM) for superior center conductor retention, electrical performance, and additional protection against transient surges.

Features:

• Minimal Signal Degradation
• Superior Seizure Technology
• Lightweight Powder Coated / Weather Sealed Corrosion Protected Housing
• 6kV, 3kA Combination  Wave (B3) Surge on all "F" Ports
• DSM Seizure Technology Provides Better Performance than 360 Degree Contacts
• "PWR IN" F-Port with Power Adapter
• Blocking Capacitors Standard on all Ports
• LED Power Indicator Light
• Operating Temperature: -40 F to +140 F
• Includes: 3' FT Power Cable
• Includes: Power Inserter
• Includes: AC/DC Power Transformer
  • Input: 120 VAC 60 Hz 100 mA
  • Output: 15 VDC 250 mA

Forward Path Specifications:

• Forward Path Frequency Range: 54 - 1,000 MHz
• Typical Gain (Per Output Port): 3.3 dB
• Rated Output Level (dBmV), Channels Flat: 13.3 @ 80
• Output Port-to-Port Isolation: 15 - 42 MHz: 30 dB
• Output Port-to-Port Isolation: 54 - 1000 MHz: 25 dB
• RF Amplification Device IC - GaAS HBT
• Passband Response: +- 0.5 dB
• Noise Figure @ 70 F: 3.6 dB
• Return Loss, All Ports: 20dB (Min.)
• Composite Second Order Distortions: < -62 dBc
• Composite Triple Beat Distortions: < -75 dBc
• Cross Modulation Distortions: < -75 dBc
• Hum Modulation: < -75 dBc
• Group Delay (ns) @ 54 - 60 MHz: < 20/3.58 MHz
• Group Delay (ns) @ 60 - 1000 MHz: < 5/3.58 MHz
• Shielding Effectiveness (RFI): >110 dB
• Nominal Impedance: 75 Ohm

Passive Return Path Specifications:

• Return Path Frequency Range: 5 - 42 MHz
• Passive Return Insertion Loss: -11.7 dB
• Passband Response: +- 0.5 dB
• Return Loss: 20dB (Min.)
• Group Delay (ns) @ 5 - 6.5 MHz: < 20/1 MHz
• Group Delay (ns) @ 6.5 - 40 MHz: < 5/1 MHz
• Group Delay (ns) @ 40 - 42 MHz: < 20/1 MHz
• HUM Modulation: < -75 dBc
• Nominal Impedance: 75 Ohm

Retail Price: $74.95

Our Discounted Price: $44.95

20 dB In-Line Signal Amplifier Satellite Coaxial F-Type LNB TV Antenna Digital Booster Coax Cable DSS DBS Dish Outdoor Video Channels, 950 - 2050 MHz DC Passive, 13 - 18 VDC, Part # LAA

Your price: $2.95

20 dB In-Line Signal Amplifier Satellite Coaxial F-Type LNB TV Antenna Digital Booster Coax Cable DSS DBS Dish Outdoor Video Channels, 950 - 2050 MHz DC Passive, 13 - 18 VDC, Part # LAA

This is a high quality I.F. 950-2050 MHz line amplifier with up to 20dB gain at 1450MHz. This amplifier is DC passive. For long satellite cable runs. No need for separate power supply.

Retail Price: $7.95

Our Discounted Price: $2.95

20 dB In-Line Amplifier Fixed Slope Channel Master 20dB Satellite Signal Inline Booster Amp LNB Dish TV Video DSS DBS Digital Antenna Coaxial Cable Run Channel Strength, 950-2150 MHz, Part # PCT-SIA-20

Your price: $2.99

20 dB In-Line Amplifier Fixed Slope Channel Master 20dB Satellite Signal Inline Booster Amp LNB Dish TV Video DSS DBS Digital Antenna Coaxial Cable Run Channel Strength, 950-2150 MHz, Part # PCT-SIA-20

Channel Master - A Name You Can Trust!!!!

This is a high quality fixed slope in-line signal amplifier 950-2150 MHz line booster amp with up to 20 dB gain. For long satellite cable runs. No need for separate power supply. Commercial Grade.

Retail Price: $6.95

Our Discounted Price: $2.99

Channel Master 20 dB In-Line Amplifier DBS LNB 2 GHz DC Passing Fixed Slope 20dB Satellite Signal Inline Booster Amp Dish TV Video Digital Antenna Coaxial Cable Run Channel Strength, 950-2150 MHz, Part # PCT-SIA-20

Your price: $3.25

Channel Master 20 dB In-Line Amplifier DBS LNB 2 GHz DC Passing Fixed Slope 20dB Satellite Signal Inline Booster Amp Dish TV Video Digital Antenna Coaxial Cable Run Channel Strength, 950-2150 MHz, Part # PCT-SIA-20

Channel Master - A Name You Can Trust!!!!

This is a high quality fixed slope in-line signal amplifier 950-2150 MHz line booster amp with up to 20 dB gain. For long satellite cable runs. No need for separate power supply. Commercial Grade.

Retail Price: $6.95

Our Discounted Price: $3.25

Vanco CATV 30 dB Distribution Amplifier 1 GHz Broadband Drop 54-1000 MHz Frequency Range Channel 2-78 TV Signal Amp Adjustable Gain Home Television Antenna Aerial Low Noise

Your price: $29.95

Vanco CATV 30 dB Distribution Amplifier 1 GHz  Broadband Drop 54-1000 MHz Frequency Range Channel 2-78 TV Signal Amp Adjustable Gain Home Television Antenna Aerial Low Noise

The new CTA-30A has been specifically designed for the higher end home distribution market where a flat, full bandwidth amp is required. The low noise and high output capability makes this amplifier ideal for systems with either the weakest or strongest input signals. The IC amplifiers offer both advanced reliability as well as a higher return loss which insures the continued flatness within the distribution system.

Specifications:

• 1 GHz Bandwidth
• Gain: 30 dB
• Low noise figure: 4 dB
• High output capability
• Adjustable knob to control gain
• Flat frequency response to 1 GHz
• Uses IC amplifiers for greater reliability
• Switchable FM trap
• Frequency range: 54-1000 MHz
• Flatness: +/- 1 dB
• Gain: 30 dB
• Gain adjust range: 8 dB
• Output Power: 25 dBmV
• Input capability: 15-23 dB
• Output capability: 45 dB max (7 channels)
• FM notch depth: 0/25 dB (54-450 MHz)

Retail Price: $59.95

Our Discounted Price: $29.95

Eagle Aspen DISTAMP-25-GX 25 dB Distribution Amplifier Signal Booster Amp with Switchable FM Trap High Output UHF / VHF / FM Antenna Aerial Single Output Audio Video Broad Band, Part # AMP-25GX

Your price: $11.39

Eagle Aspen DISTAMP-25-GX 25 dB Distribution Amplifier Signal Booster Amp with Switchable FM Trap High Output UHF / VHF / FM Antenna Aerial Single Output Audio Video Broad Band, Part # AMP-25GX

Eagle Aspen DISTAMP-25-GX 25-DB VHF/UHF/FM 1-OUTPUT, Video Distribution FM Trap Signal amplifier for antenna and broad band. The DISTAMP-25-GX is a full spectrum, high output amplifier for small CATV or low distortion applications where performance and reliability are required.

Specifications:

• 25 dB High Output UHF / VHF / FM Distribution Amplifier
• Single Output
• Low Noise:
  • VHF: 6 dB
  • UHF: 7 dB
• Bandwidth: 54 - 860 MHz
• FM Trap: -25 dB @ 95 - 108 MHz
• Commercial Grade

Retail Price: $19.95

Our Discounted Price: $11.39

Eagle Aspen HDA-2P HDTV 24 dB Amplifier with 2 Outputs Ultra Low Noise Digital Distribution Amplifier CATV Off-Air Bi-Directional Signal RF Amp Analog 54-806 MHz Forward and 5-42 MHz Reverse, Part # HDA2P

Your price: $28.95

Eagle Aspen HDA-2P HDTV 24 dB Amplifier with 2 Outputs Ultra Low Noise Digital Distribution Amplifier CATV Off-Air Bi-Directional Signal RF Amp Analog 54-806 MHz Forward and 5-42 MHz Reverse, Part # HDA2P

Ultra Low Noise HDTV Amplifier. 24 dB High Gain, High Signal Handling. Use with off-air, CATV, Digital and Analog broadcasts.

Specifications:

• 2 Coaxial F Output Ports
• 24 dB High Gain Distribution
• Forward Path 54-806 MHz
• Reverse Path 5-42 MHz
• Ultra Low Noise
• Power Supply Output Voltage 12V, 200mA
• Class 2 Transformer
• Impedance 75 Ohms

Retail Price: $59.95

Our Discounted Price: $28.95

Eagle Aspen HDA-4P HDTV 24 dB Amplifier with 4 Outputs Ultra Low Noise Digital Distribution Amplifier CATV Off-Air Bi-Directional Signal RF Amp Analog 54-806 MHz Forward and 5-42 MHz Reverse, Part # HDA4P

Your price: $31.95

Eagle Aspen HDA-4P HDTV 24 dB Amplifier with 4 Outputs Ultra Low Noise Digital Distribution Amplifier CATV Off-Air Bi-Directional Signal RF Amp Analog 54-806 MHz Forward and 5-42 MHz Reverse, Part # HDA4P

Ultra Low Noise HDTV Amplifier. 24 dB High Gain, High Signal Handling. Use with off-air, CATV, Digital and Analog broadcasts.

Specifications:

• 4 Coaxial F Output Ports
• 24 dB High Gain Distribution Amp
• Forward Path 54-806 MHz
• Reverse Path 5-42 MHz
• Ultra Low Noise
• Power Supply Output Voltage 12V, 200mA
• Class 2 Transformer
• Impedance 75 Ohms

Retail Price: $64.95

Our Discounted Price: $31.95

4 Output Distribution Amplifier 22 dB Video Indoor Channel Master 3044 22 dB Four Output CM3044 TV Aerial Antenna Video Signal Booster / Amp, 75 Ohm 120 VAC, 4 Output, Part # CM-3044

Your price: $26.95

4 Output Distribution Amplifier 22 dB Video Indoor Channel Master 3044 22 dB Four Output CM3044 TV Aerial Antenna Video Signal Booster / Amp, 75 Ohm 120 VAC, 4 Output, Part # CM-3044

This product is no longer available for purchase.

It has been replaced by the Channel Master 3414 Amplifier!!!!

Handles all cable and UHF/VHF/FM off-air signals, including return path. Allows for distribution of amplified signals up to 4 TV sets or other video equipment without the use of additional splitters. Works with cable modems. For indoor use only. Simple to install.

Specifications:

• 4 Output
• Frequency Range: 50-900 MHz
• Return Path: 5-42 MHz
• Amplifier Gain 22 dB
• Gain Each Output: 8 dB
• Noise Figure: 3.5 dB
• Impedance: 75 ohm
• Isolation Between Ports: 24 dB
• Max. Output per Channel: 23 dBmV (@ 36 Channels)
• Operating Voltage: 105-129 VAC

Retail Price: $59.95

Our Discounted Price: $26.95

Channel Plus DA-550HHR HDTV Video RF Distribution Amplifier Panel with 12 Volt IR High-Headroom, 1 Antenna / CATV Input, 2 Modulation Input, 8 Video Output, Part # DA-550-HHR

Your price: $147.95

Channel Plus DA-550HHR HDTV Video RF Distribution Amplifier Panel with 12 Volt IR High-Headroom, 1 Antenna / CATV Input, 2 Modulation Input, 8 Video Output, Part # DA-550-HHR

Channel Plus DA-550HHR High Headroom RF 8 Port Distribution Amp

The Model DA-550HHR High-headroom RF Distribution Amplifier with 12-Volt IR is the heart of a multi-room distribution system with outputs to eight televisions with coax runs up to 150 feet. The Model DA-550HHR has three inputs, one from off-air antenna or CATV and two from Channel Plus 5400, 5500, or SVM series modulators. The DA-550HHR is used with antenna applications for off-air digital and NTSC signals.

The Model DA-550HHR can be powered locally with its included power supply or remotely from up to 75 feet away by using an in-wall power injector wall plate Model 2010 or any 5500 series or SVM series modulator.

The Model DA-550HHR offers optional IR control of connected video sources and whole house IR integration with a built-in 12-volt IR engine. Adding a Model 2100A wall plate and a 12-volt IR target to the coax run of any room allows IR signals to be routed to either a Model 2010 wall plate, 5500 series, or SVM series modulator.

Specifications:

• Channel Plus DA-550HHR HDTV Distribution Panel
• 54 MHz to 1 GHz forward bandwidth
• 3 dB nominal gain on TV outputs
• Maximum input level 20 dBmv
• Can be used in locations without electrical access and powered remotely with a Channel Plus modulator or the Model 2010 wall plate
• Dimensions: 6.5" W x 1.25" H x 4.5" D

Retail Price: $239.95

Our Discounted Price: $147.95

Channel Plus DA-500A 18 dB RF Distribution Amplifier DA500A Antenna / CATV Pre-Amplifier, EMI Rejection, 1 Input, 1 Video Output, Part # DA-500-A

Your price: $42.49

Channel Plus DA-500A 18 dB RF Distribution Amplifier DA500A Antenna / CATV Pre-Amplifier, EMI Rejection, 1 Input, 1 Video Output, Part # DA-500-A

Channel Plus DA-500A Single Distribution RF Amp

The Model DA-500A RF Amplifier with 18 dB of gain, is ideal for residential cable systems or as an antenna pre-amplifier. The DA-500A offers a robust power supply and great EMI rejection. It includes grid mounting ears for the Model 2619 Rack-mount Grid. The DA-500A is fully compatible with HDTV Television signals.

Specifications:

• Channel Plus DA-500A RF Amplifier
• Full RF Bandwidth Spectrum
• 50 MHz to 1 GHz Bandwidth
• 18 dB nominal gain
• ±1.5 dB gain flatness
• Maximum input level 40 dBmv
• Dimensions: 6.3" W x 1.25" H x 4.5 D"

Retail Price: $79.95

Our Discounted Price: $42.49

Satellite In-Line Amplifier 10 - 12 dB 2 GHz Digital Channel Master 5113IFD Satellite IF In-line Booster 950 - 2150 with Cable Slope Compensation Commercial Grade Dish TV DSS DBS Coaxial, Part # 5113 IFD

Your price: $2.95

Satellite In-Line Amplifier 10 - 12 dB 2 GHz Digital Channel Master 5113IFD Satellite IF In-line Booster 950 - 2150 with Cable Slope Compensation Commercial Grade Dish TV DSS DBS Coaxial, Part # 5113 IFD

Get the BEST for LESS with Channel Master!!!

The 5113IFD is a general purpose, low cost satellite IF line amplifier with a 14dB gain at 1450MHz and appropriate gain between 950 and 2150 MHz to give cable slope compensation. Typical applications include Long runs (greater than 100 feet) from receiver to LNB, a satellite IF distribution system where signal has become marginal at the end of the system or prior to splitting a signal to prevent excessive loss. Not designed to be cascaded. Frequency: 950-2150 MHz.

Retail Price: $6.95

Our Discounted Price: $2.95

Linear DA-500A RF Distribution Amplifier DA500A 18 dB Gain Antenna / CATV Pre-Amplifier, EMI Rejection, 1 Input, 1 Video Output, Part # DA-500-A

Your price: $42.49

Linear DA-500A RF Distribution Amplifier DA500A 18 dB Gain Antenna / CATV Pre-Amplifier, EMI Rejection, 1 Input, 1 Video Output, Part # DA-500-A

Linear DA-500A Single Distribution RF Amp

The Model DA-500A RF Amplifier with 18 dB of gain, is ideal for residential cable systems or as an antenna pre-amplifier. The DA-500A offers a robust power supply and great EMI rejection. It includes grid mounting ears for the Model 2619 Rack-mount Grid. The DA-500A is fully compatible with HDTV Television signals.

Specifications:

• Channel Plus DA-500A RF Amplifier
• Full RF Bandwidth Spectrum
• 50 MHz to 1 GHz Bandwidth
• 18 dB nominal gain
• ±1.5 dB gain flatness
• Maximum input level 40 dBmv
• Dimensions: 6.3" W x 1.25" H x 4.5 D"

Retail Price: $79.95

Our Discounted Price: $42.49

Linear HD Video RF Distribution Amplifier Panel with 12 Volt IR Channel Plus DA-550HHR High-Headroom, 1 Antenna / CATV Input, 2 Modulation Input, 8 Video Output, Part # DA-550-HHR

Your price: $151.49

Linear HD Video RF Distribution Amplifier Panel with 12 Volt IR Channel Plus DA-550HHR High-Headroom, 1 Antenna / CATV Input, 2 Modulation Input, 8 Video Output, Part # DA-550-HHR

Channel Plus DA-550HHR High Headroom RF 8 Port Distribution Amp

The Model DA-550HHR High-headroom RF Distribution Amplifier with 12-Volt IR is the heart of a multi-room distribution system with outputs to eight televisions with coax runs up to 150 feet. The Model DA-550HHR has three inputs, one from off-air antenna or CATV and two from Channel Plus 5400, 5500, or SVM series modulators. The DA-550HHR is used with antenna applications for off-air digital and NTSC signals.

The Model DA-550HHR can be powered locally with its included power supply or remotely from up to 75 feet away by using an in-wall power injector wall plate Model 2010 or any 5500 series or SVM series modulator.

The Model DA-550HHR offers optional IR control of connected video sources and whole house IR integration with a built-in 12-volt IR engine. Adding a Model 2100A wall plate and a 12-volt IR target to the coax run of any room allows IR signals to be routed to either a Model 2010 wall plate, 5500 series, or SVM series modulator.

Specifications:

• Channel Plus DA-550HHR HDTV Distribution Panel
• 54 MHz to 1 GHz forward bandwidth
• 3 dB nominal gain on TV outputs
• Maximum input level 20 dBmv
• Can be used in locations without electrical access and powered remotely with a Channel Plus modulator or the Model 2010 wall plate
• Dimensions: 6.5" W x 1.25" H x 4.5" D

Retail Price: $239.95

Our Discounted Price: $151.49

Channel Plus TC-200A Tilt Compensator 1 Pack F-Connector High Frequency Attenuator TC200A In-Line Filter Female to Male Coupler with Female to Female Barrel Adapter, Part # TC-200A

Your price: $10.49

Channel Plus TC-200A Tilt Compensator 1 Pack F-Connector High Frequency Attenuator TC200A In-Line Filter Female to Male Coupler with Female to Female Barrel Adapter, Part # TC-200A

Channel Plus TC-200A In-Line High Frequency Tilt Compensator

The Model TC-200A Tilt Compensator is an in-line filter designed to create an attenuation loss equal and opposite to cable loss. Coaxial cable attenuates high frequencies greater than low frequencies. This problem is most severe when cascading amplifiers one after another. The signal differences are attenuated to a point where the high frequency signals are so small compared to the low frequency signals that the high frequency signals can no longer be received. The TC-200A Tilt Compensator provides a balanced signal level by compensating for 200 feet of coax cable loss and allowing all signal levels on all channels to be of equal amplitude at distant locations. Therefore, the picture quality on the higher channels will be maintained.

The TC-200A is designed to work with RG-6 coax cable carrying signals in the 5 MHz to 1 GHz range. When an RG-6 cable run reaches 200 feet, install a TC-200A Tilt Compensator whenever an amplifier stage follows. A female barrel connector is included with the TC-200A for in-line applications. The TC-200A is non-directional, the input can be connected to either end.

Specifications:

• Compensates for high frequency signal loss on long coax runs
• Female "F" and male "F" connectors
• Includes Female-Female barrel connector for in-line use

Retail Price: $19.95

Our Discounted Price: $10.49

Steren 30 dB Adjustable Distribution Amplifier UHF VHF FM Drop 550 MHZ - 1000 MHZ Broadband Frequency Range Channel CATV 2-78 TV Signal Amp Adjustable Gain Home TV Antenna Aerial Low Noise 1 GHz Signal

Your price: $37.95

Steren 30 dB Adjustable Distribution Amplifier UHF VHF FM Drop 550 MHZ - 1000 MHZ Broadband Frequency Range Channel CATV 2-78 TV Signal Amp Adjustable Gain Home TV Antenna Aerial Low Noise 1 GHz Signal

The new CTA-30A has been specifically designed for the higher end home distribution market where a flat, full bandwidth amp is required. The low noise and high output capability makes this amplifier ideal for systems with either the weakest or strongest input signals. The IC amplifiers offer both advanced reliability as well as a higher return loss which insures the continued flatness within the distribution system.

Specifications:

• 1 GHz Bandwidth
• Gain: 30 dB
• Low noise figure: 4 dB
• High output capability
• Adjustable knob to control gain
• Flat frequency response to 1 GHz
• Uses IC amplifiers for greater reliability
• Switchable FM trap
• Frequency range: 54-1000 MHz
• Flatness: +/- 1 dB
• Gain: 30 dB
• Gain adjust range: 8 dB
• Output Power: 25 dBmV
• Input capability: 15-23 dB
• Output capability: 45 dB max (7 channels)
• FM notch depth: 0/25 dB (54-450 MHz)

Retail Price: $59.95

Our Discounted Price: $37.95

Channel Master 3410 Ultra Mini Distribution Multi-Media Drop Amplifier CM3410 Signal Distribution Amplifier TV RF Output Booster Amp Multimedia 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-M

Your price: $22.85

Channel Master 3410 Ultra Mini Distribution Multi-Media Drop Amplifier CM3410 Signal Distribution Amplifier TV RF Output Booster Amp Multimedia 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-M

Channel Master PCT-MA2-M Ultra Mini Video Amplifier by PCT!!!

After setting the industry standard for performance and price, Channel Master is now giving you more space to relieve congested installs and the ability to add new services through existing NIDs.

Features:

• Ultra small form factor for ease of installation in confined spaces.
• Lightweight powder coated and weather sealed housing for superior corrosion protection.
• Same performance required by the major television companies.
• Compact design for easy installation in many locations.
• Supports both analog and digital broadcast signals.
• Supports cable modem applications.
• 1 Output Port
• Operating Frequency: 54 - 1002 MHz
• Return Path: 5 - 42 MHz
• Amplifier Gain: 15 dB
• LED power indicator
• Passive Return
• 6 kV, 3kA combination wave (B3) surge withstand on all "F" ports.
• Precision machined SCTE compliant sealed "F" ports.
• Patented DSM seizure technology provides better performance than 360 degree contacts.
• 5-year warranty

Specifications:

• Powering
  • Direct via “PWR IN” F-port
  • Drop-Line via power inserter MPI-1G
  • Power adapter optional
• Input / Output Connectors
  • SCTE compliant F-Female (standard PCT-F61DSM)
  • Machined brass, Nickel plated
• Blocking Capacitors
  • Standard on all ports
• Surge Withstand
  • IEEE C62.41-1991 Category
  • B3 (6kV) for all RF ports
• Operating Temperature
  • -40 to 60 C (-40 to 140 F)
• Housing
  • Cast aluminum with powder coating with weather seal

Includes:

• Ultra Mini Digital Video Amplifier
• Power Supply
• Power Supply Cable

Retail Price: $39.95

Our Discounted Price: $22.85

Channel Master 3414 Mini Distribution Drop Amplifier 8 dB UHF/VHF Multi-Media CM3414 Signal Amplifier TV RF Output Booster Amp Multimedia Digital Video Amplifier 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-4P

Your price: $26.89

Channel Master 3414 Mini Distribution Drop Amplifier 8 dB UHF/VHF Multi-Media CM3414 Signal Amplifier TV RF Output Booster Amp Multimedia Digital Video Amplifier 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-4P

Channel Master PCT-MA2-4P Mini Video Drop Amplifier by PCT!!!

PCT's miniature MA2 drop amplifier series has improved performance and ultra-low noise amplification of broadband signals for subscriber drop installations. The MA2 series provides better return loss performance, enhanced shielding protection, and IEEE B3 6kV, 3000 amp combination wave surge withstand on all ports for superior lightning protection. All “F” ports also include PCT’s patented Digital Seizure Mechanism (DSM) for superior center conductor retention, electrical performance, and additional protection against transient surges.

Features:

• Small form factor for ease of installation in confined spaces.
• Lightweight powder coated and weather sealed housing for superior corrosion protection.
• Same performance required by the major cable television companies.
• Compact design for easy installation in many locations.
• Supports both analog and digital broadcast signals.
• Supports cable modem applications.
• 4 Output Ports
• Operating Frequency: 54 - 1002 MHz
• Return Path: 5 - 42 MHz
• Amplifier Gain: 8 dB
• LED power indicator
• Passive return
• 6 kV, 3kA combination wave (B3) surge withstand on all "F" ports
• Precision machined SCTE-compliant sealed "F" ports
• Patented DSM seizure technology provides better performance than 360 degree contacts

Specifications:

• Powering
  • Direct via “PWR IN” F-port
  • Drop-Line via power inserter MPI-1G
  • Power adapter optional
• Input / Output Connectors
  • SCTE compliant F-Female (standard PCT-F61DSM)
  • Machined brass, Nickel plated
• Blocking Capacitors
  • Standard on all ports
• Surge Withstand
  • IEEE C62.41-1991 Category B3 (6kV) for all RF ports
• Operating Temperature
  • -40 to 60 C (-40 to 140 F)
• Housing
  • Cast aluminum with powder coating with weather seal

Includes:

• Mini Digital Multimedia Drop Amplifier
• Power Supply
• Power Supply Cable

Retail Price: $49.95

Our Discounted Price: $26.89

3414 4 Way Four Output Outdoor Indoor Channel Master Mini Distribution Drop Amplifier 8 dB UHF/VHF Multimedia CM3414 Signal Amplifier Booster Amp Multi-Media Digital Video 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-4P

Your price: $26.89

3414 4 Way Four Output Outdoor Indoor Channel Master Mini Distribution Drop Amplifier 8 dB UHF/VHF Multimedia CM3414 Signal Amplifier Booster Amp Multi-Media Digital Video 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-4P

Channel Master PCT-MA2-4P Mini Video Drop Amplifier by PCT!!!

PCT's miniature MA2 drop amplifier series has improved performance and ultra-low noise amplification of broadband signals for subscriber drop installations. The MA2 series provides better return loss performance, enhanced shielding protection, and IEEE B3 6kV, 3000 amp combination wave surge withstand on all ports for superior lightning protection. All “F” ports also include PCT’s patented Digital Seizure Mechanism (DSM) for superior center conductor retention, electrical performance, and additional protection against transient surges.

Features:

• Small form factor for ease of installation in confined spaces.
• Lightweight powder coated and weather sealed housing for superior corrosion protection.
• Same performance required by the major cable television companies.
• Compact design for easy installation in many locations.
• Supports both analog and digital broadcast signals.
• Supports cable modem applications.
• 4 Output Ports
• Operating Frequency: 54 - 1002 MHz
• Return Path: 5 - 42 MHz
• Amplifier Gain: 8 dB
• LED power indicator
• Passive return
• 6 kV, 3kA combination wave (B3) surge withstand on all "F" ports
• Precision machined SCTE-compliant sealed "F" ports
• Patented DSM seizure technology provides better performance than 360 degree contacts

Specifications:

• Powering
  • Direct via “PWR IN” F-port
  • Drop-Line via power inserter MPI-1G
  • Power adapter optional
• Input / Output Connectors
  • SCTE compliant F-Female (standard PCT-F61DSM)
  • Machined brass, Nickel plated
• Blocking Capacitors
  • Standard on all ports
• Surge Withstand
  • IEEE C62.41-1991 Category B3 (6kV) for all RF ports
• Operating Temperature
  • -40 to 60 C (-40 to 140 F)
• Housing
  • Cast aluminum with powder coating with weather seal

Includes:

• Mini Digital Multimedia Drop Amplifier
• Power Supply
• Power Supply Cable

Retail Price: $49.95

Our Discounted Price: $26.89

Philips Magnavox Video System VHF/UHF/FM 24 dB Amplifier PM61111 Dual Output Distribution Amp TV Signal Booster Aerial Antenna Broad Band Amp, 2 Way Audio Video, Part # PM-61111

Your price: $17.49

Philips Magnavox Video System VHF/UHF/FM 24 dB Amplifier PM61111 Dual Output Distribution Amp TV Signal Booster Aerial Antenna Broad Band Amp, 2 Way Audio Video, Part # PM-61111

2 way amplifier broad band VHF/UHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. This item may be substituted upon order fulfillment.

Retail Price: $29.95

Our Discounted Price: $17.49

Channel Master 3418 8-Way Distribution Amplifier 8 Output 50 - 900 MHz 22 dB Gain 8 Port Amp with Return Path CM3418 Multi-Set Off-Air Antenna HDTV Local Television Aerial Signal Distribution Booster, Part # CM-3418

Your price: $34.95

Channel Master 3418 8-Way Distribution Amplifier 8 Output 50 - 900 MHz 22 dB Gain 8 Port Amp with Return Path CM3418 Multi-Set Off-Air Antenna HDTV Local Television Aerial Signal Distribution Booster, Part # CM-3418

8 Port Multimedia Drop Signal Amplifier by PCT!!!

PCT's new miniature MA2 drop amplifier series features improved performance and ultra-low noise amplification of broadband signals for subscriber drop installations. The MA2 series provides better return loss performance, enhanced shielding protection, and IEEE B3 6kV, 3000 amp combination wave surge withstand on all ports for superior lighting protection. All "F" ports also include PCT's patented Digital Seizure Mechanism (DSM) for superior center conductor retention, electrical performance, and additional protection against transient surges.

Features:

• Minimal Signal Degradation
• Superior Seizure Technology
• Lightweight Powder Coated / Weather Sealed Corrosion Protected Housing
• 6kV, 3kA Combination  Wave (B3) Surge on all "F" Ports
• DSM Seizure Technology Provides Better Performance than 360 Degree Contacts
• "PWR IN" F-Port with Power Adapter
• Blocking Capacitors Standard on all Ports
• LED Power Indicator Light
• Operating Temperature: -40 F to +140 F
• Includes: 3' FT Power Cable
• Includes: Power Inserter
• Includes: AC/DC Power Transformer
  • Input: 120 VAC 60 Hz 100 mA
  • Output: 15 VDC 250 mA

Forward Path Specifications:

• Forward Path Frequency Range: 54 - 1,000 MHz
• Typical Gain (Per Output Port): 3.3 dB
• Rated Output Level (dBmV), Channels Flat: 13.3 @ 80
• Output Port-to-Port Isolation: 15 - 42 MHz: 30 dB
• Output Port-to-Port Isolation: 54 - 1000 MHz: 25 dB
• RF Amplification Device IC - GaAS HBT
• Passband Response: +- 0.5 dB
• Noise Figure @ 70 F: 3.6 dB
• Return Loss, All Ports: 20dB (Min.)
• Composite Second Order Distortions: < -62 dBc
• Composite Triple Beat Distortions: < -75 dBc
• Cross Modulation Distortions: < -75 dBc
• Hum Modulation: < -75 dBc
• Group Delay (ns) @ 54 - 60 MHz: < 20/3.58 MHz
• Group Delay (ns) @ 60 - 1000 MHz: < 5/3.58 MHz
• Shielding Effectiveness (RFI): >110 dB
• Nominal Impedance: 75 Ohm

Passive Return Path Specifications:

• Return Path Frequency Range: 5 - 42 MHz
• Passive Return Insertion Loss: -11.7 dB
• Passband Response: +- 0.5 dB
• Return Loss: 20dB (Min.)
• Group Delay (ns) @ 5 - 6.5 MHz: < 20/1 MHz
• Group Delay (ns) @ 6.5 - 40 MHz: < 5/1 MHz
• Group Delay (ns) @ 40 - 42 MHz: < 20/1 MHz
• HUM Modulation: < -75 dBc
• Nominal Impedance: 75 Ohm

Retail Price: $74.95

Our Discounted Price: $34.95

15 dB Distribution Amplifier 2-Way Ultra Mini Drop Multi-Media UHF VHF One Port Channel Master 3410 Ultra CM3410 Signal TV RF Output Booster Amp Multimedia 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-M

Your price: $22.85

15 dB Distribution Amplifier 2-Way Ultra Mini Drop Multi-Media UHF VHF One Port Channel Master 3410 Ultra CM3410 Signal TV RF Output Booster Amp Multimedia 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-M

Channel Master PCT-MA2-M Ultra Mini Video Amplifier by PCT!!!

After setting the industry standard for performance and price, Channel Master is now giving you more space to relieve congested installs and the ability to add new services through existing NIDs.

Features:

• Ultra small form factor for ease of installation in confined spaces.
• Lightweight powder coated and weather sealed housing for superior corrosion protection.
• Same performance required by the major television companies.
• Compact design for easy installation in many locations.
• Supports both analog and digital broadcast signals.
• Supports cable modem applications.
• 1 Output Port
• Operating Frequency: 54 - 1002 MHz
• Return Path: 5 - 42 MHz
• Amplifier Gain: 15 dB
• LED power indicator
• Passive Return
• 6 kV, 3kA combination wave (B3) surge withstand on all "F" ports.
• Precision machined SCTE compliant sealed "F" ports.
• Patented DSM seizure technology provides better performance than 360 degree contacts.
• 5-year warranty

Specifications:

• Powering
  • Direct via “PWR IN” F-port
  • Drop-Line via power inserter MPI-1G
  • Power adapter optional
• Input / Output Connectors
  • SCTE compliant F-Female (standard PCT-F61DSM)
  • Machined brass, Nickel plated
• Blocking Capacitors
  • Standard on all ports
• Surge Withstand
  • IEEE C62.41-1991 Category
  • B3 (6kV) for all RF ports
• Operating Temperature
  • -40 to 60 C (-40 to 140 F)
• Housing
  • Cast aluminum with powder coating with weather seal

Includes:

• Ultra Mini Digital Video Amplifier
• Power Supply
• Power Supply Cable

Retail Price: $39.95

Our Discounted Price: $22.85

Steren 200-652 6 dB Video Amplifier 2 Output Distribution UHF VHF 3 dB UHF 2-Way RF Signal Television Signal Aerial Booster Coaxial Cable Single Input Dual Output Connection, Part # 200652

Your price: $11.95

Steren 200-652 6 dB Video Amplifier 2 Output Distribution UHF VHF 3 dB UHF 2-Way RF Signal Television Signal Aerial Booster Coaxial Cable Single Input Dual Output Connection, Part # 200652

The simple design allows for easy hook-up. The dual output allows for all TV hook-ups.

Features:

• Steren 200-652 UHF VHF Distribution Amplifier
• TV/Video Signal Amplifier
• Easy Installation.
• Low Noise
• Indoor Use

Specifications:

• Bandwidth: 47 - 900 MHz
• Gain: VHF 6 dB, UHF 3 dB
• Response Flatness: +- 2 dB
• Max Input: 32 dBmV
• Impedance: 75 Ohms (1 Input, 2 Output)

Retail Price: $19.95

Our Discounted Price: $11.95

Steren 200-656 Broadband Video Amplifier 10 dB 1 Input 1 Output Switchable FM Attenuation Trap FM Rejection UL Listed On/Off Indicator Light, Part # 200656

Your price: $6.87

Steren 200-656 Broadband Video Amplifier 10 dB 1 Input 1 Output Switchable FM Attenuation Trap FM Rejection UL Listed On/Off Indicator Light, Part # 200656

This product is no longer available for purchase.

Please check out our Antenna Pre-Amplifier Section for similar products!!!!

The simple design allows for fast and easy hook-up.

Features:

• Steren 200-656 UHF VHF Distribution Amplifier
• TV/Video Signal Amplifier
• Easy Installation.
• Low Noise
• Indoor Use

Specifications:

• Bandwidth: 47 - 900 MHz
• Gain: VHF 10 dB, UHF 7 dB
• Response Flatness: +- 2 dB
• Max Input: 32 dBmV
• Impedance: 75 Ohms (1 Input, 1 Output)

Retail Price: $14.95

Our Discounted Price: $6.87

Channel Plus DA-506BID 6 Output Bi-Directional RF 1 X 6 Coaxial Panel Distribution Amplifier DA506BID Video Hub Module with 5 - 42 MHz Return Path for DTV / CATV Rack Mountable Video Distribution Systems, Part # DA506-BID

Your price: $60.89

Channel Plus DA-506BID 6 Output Bi-Directional RF 1 X 6 Coaxial Panel Distribution Amplifier DA506BID Video Hub Module with 5 - 42 MHz Return Path for DTV / CATV Rack Mountable Video Distribution Systems, Part # DA506-BID

Channel Plus DA-506BID Bi-Directional RF Distribution Amplifier

The Model DA-506BID Bi-directional RF Distribution Amplifier creates an ideal entry-level product for broadband distribution. Encased in an extruded aluminum shell, the Model DA-506BID meets the needs of small distribution systems which do not require IR control or modulator inputs. The Model DA-506BID has one input for CATV or off-air antenna and six outputs for televisions. Four outputs are for televisions up to 75 feet away and 2 outputs can be used up to 150 feet away. The DA-506BID has bi-directional capabilities with a 5-42 MHz bandwidth return path on the CATV/antenna input. This allows compatibility with interactive CATV set top boxes. Grid mount ears are included for mounting in the Model 2619 Rack-mount grid. The DA-506BID is compatible with broadcast DTV Television signals on the VHF & UHF bands. Please Note: The DA-506BID is not compatible with digital or analog CATV signals above 806 MHz (CATV channels 127-140).

Specifications:

• 54 MHz to 806 MHz forward bandwidth
• 5 MHz to 42 MHz reverse bandwidth
• 1 dB nominal gain on "short" TV outputs (4 Ports)
• 4 dB nominal gain on "long" TV outputs (2 Ports)
• ±1.5 dB gain flatness
• Maximum input level 20 dBmv
• Dimensions: 6.3" W x 1.25" H x 4.5 D"

Retail Price: $109.95

Our Discounted Price: $60.89

Channel Plus DA-550BID RF Distribution Amplifier Bi-Directional Video 12V IR 8-Way 1 GHz High Headroom DA550BID Video Hub Module with 5 - 42 MHz Return Path for DTV / CATV Rack Mountable Video Systems, Part # DA550-BID

Your price: $145.85

Channel Plus DA-550BID RF Distribution Amplifier Bi-Directional Video 12V IR 8-Way 1 GHz High Headroom DA550BID Video Hub Module with 5 - 42 MHz Return Path for DTV / CATV Rack Mountable Video Systems, Part # DA550-BID

Channel Plus DA-550BID Bi-Directional RF Distribution Amplifier with 12V IR

The Model DA-550BID Bi-directional RF Distribution Amplifier with 12-volt IR is the heart of a multi-room distribution system with outputs to eight televisions with coax runs up to 150 feet. The Model DA-550BID has three inputs, one from CATV and two from Channel Plus 5400, 5500, or SVM series modulators. The Model DA-550BID can handle an extremely wide range of input signals from NTSC and digital TV. The Model DA-550BID offers a 5-42 MHz bandwidth return path for bi-directional communication for use with digital cable interactive set-top boxes.

The Model DA-550BID can be powered locally with its included power supply or remotely from up to 75 feet away by using an in-wall power injector wall plate Model 2010 or any 5500 series or SVM series modulator.

The Model DA-550BID offers optional IR control of connected video sources and whole house IR integration with a built-in 12-volt IR engine. Adding a Model 2100A wall plate and a 12-volt IR target to the coax run of any room allows IR signals to be routed to either a Model 2010 wall plate, 5500 series, or SVM series modulator.

Specifications:

• 54 MHz to 1 GHz forward bandwidth
• 5 MHz to 42 MHz reverse bandwidth
• 3 dB nominal gain on TV outputs
• Maximum input level 20 dBmv
• Can be used in locations without electrical access and powered remotely with a Channel Plus modulator or the Model 2010 wall plate.
• Dimension: 6.5" W x 1.25" H x 4.5" D

Retail Price: $199.95

Our Discounted Price: $145.85

Channel Plus DA-8200BID Bi-Directional RF Distribution Amplifier 8-Way Output 1 GHz Signal 3 dB Gain with 5 Volt IR DA8200BID Video Hub Module 5 - 42 MHz Return Path for DTV / CATV Rack Mountable, Part # DA8200-BID

Your price: $152.79

Channel Plus DA-8200BID Bi-Directional RF Distribution Amplifier 8-Way Output 1 GHz Signal 3 dB Gain with 5 Volt IR DA8200BID Video Hub Module 5 - 42 MHz Return Path for DTV / CATV Rack Mountable, Part # DA8200-BID

Channel Plus DA-8200BID Bi-Directional RF Distribution Amplifier with 5V IR

The Model DA-8200BID Bi-directional RF Distribution Amplifier with 5-volt IR is the heart of a multi-room distribution system with outputs to eight televisions with coax runs up to 150 feet. The Model DA-8200BID has three inputs, one from CATV and two from Channel Plus 5400, 5500, or SVM series modulators. The Model DA-8200BID can handle an extremely wide range of input signals from NTSC and digital TV. The Model DA-8200BID offers a 5-42 MHz bandwidth return path for bi-directional communication for use with digital cable interactive set-top boxes.

The Model DA-8200BID can be powered locally with its included power supply or remotely from up to 75 feet away by using an in-wall power injector wall plate Model 2010 or any 5500 series or SVM series modulator.

The Model DA-8200BID features optional IR control of connected video sources and whole house IR integration with a built-in 5-volt IR engine. Model 2133 set-top IR targets connect between the amplifier outputs and the television sets. IR emitters connected to the amplifier, or to a 5500 or SVM series IR enabled modulator connected to the amplifier, will repeat the IR remote control signals back to the video source component.

Specifications:

• 54 MHz to 1 GHz forward bandwidth
• 5 MHz to 42 MHz reverse bandwidth
• 3 dB nominal gain on TV outputs
• Maximum input level 20 dBmv
• Can be used in locations without electrical access and powered remotely with a Channel Plus modulator or the Model 2010 wall plate.
• Dimensions: 6.5" W x 1.25" H x 4.5" D

Retail Price: $229.95

Our Discounted Price: $152.79

Channel Plus DA-8200HHR High-Headroom RF Distribution Amplifier 8-Way Output Off-Air DTA / CATV DA8200HHR 3 dB Gain with 5 Volt IR Video Hub Module 54 MHz - 1 GHz Forward Path Rack Mountable, Part # DA8200-HHR

Your price: $146.85

Channel Plus DA-8200HHR High-Headroom RF Distribution Amplifier 8-Way Output Off-Air DTA / CATV DA8200HHR 3 dB Gain with 5 Volt IR Video Hub Module 54 MHz - 1 GHz Forward Path Rack Mountable, Part # DA8200-HHR

Channel Plus DA-8200HHR High-Headroom RF Distribution Amplifier with 5V IR

The Model DA-8200HHR High-headroom RF Distribution Amplifier with 5-volt IR is the heart of a multi-room distribution system with outputs to eight televisions with coax runs up to 150 feet. The Model DA-8200HHR has three inputs, one from off-air antenna or CATV and two from Channel Plus 5400, 5500, or SVM series modulators. The DA-8200HHR is used with antenna applications for off-air digital and NTSC signals.

The Model DA-8200HHR can be powered locally with its included power supply or remotely from up to 75 feet away by using an in-wall power injector wall plate Model 2010 or any 5500 series or SVM series modulator.

The Model DA-8200HHR features optional IR control of connected video sources and whole house IR integration with a built-in 5-volt IR engine. Model 2133 set-top IR targets connect between the amplifier outputs and the television sets. IR emitters connected to the amplifier, or to a 5500 or SVM series IR enabled modulator connected to the amplifier, will repeat the IR remote control signals back to the video source component.

Specifications:

• 54 MHz to 1 GHz forward bandwidth
• 3 dB nominal gain on TV outputs
• Maximum input level 20 dBmv
• Can be used in locations without electrical access and powered remotely with a Channel Plus modulator or the Model 2010 wall plate.
• Dimensions: 6.5" W x 1.25" H x 4.5 D"

Retail Price: $229.95

Our Discounted Price: $146.85

Channel Plus DA-520A 20 dB Bi-Directional Cable RF Amplifier FRWD / ODB Reverse DA520A Coaxial Signal Amplifier Video Module with 54 MHz - 1 GHz Forward Bandwidth for DTV / CATV Video Distribution Systems, Part # DA520-A

Your price: $49.95

Channel Plus DA-520A 20 dB Bi-Directional Cable RF Amplifier FRWD / ODB Reverse DA520A Coaxial Signal Amplifier Video Module with 54 MHz - 1 GHz Forward Bandwidth for DTV / CATV Video Distribution Systems, Part # DA520-A

Channel Plus DA-520A Bi-Directional 12V RF DTV/CATV Signal Amplifier

The Model DA-520A Bi-directional RF Amplifier provides 20 dB of gain in a CATV or antenna system. The Model DA-520A has bi-directional capabilities with a 5-40 MHz bandwidth return path. This allows compatibility with interactive CATV set top boxes. A 12 VDC Model 999-017-01 power supply is included.

Specifications:

• 54 MHz to 1 GHz forward bandwidth
• 5 MHz to 40 MHz reverse bandwidth
• ±1.5 dB gain flatness
• Maximum input level 30 dBmv
• Dimensions: 3.5" W x 1.2" H x 2.5" D

Retail Price: $79.95

Our Discounted Price: $49.95

Channel Master 3412 Mini Distribution Multi-Media Drop Amplifier 2 Port CM3412 Signal Distribution Amplifier TV RF Output Booster Amp Multimedia 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-M

Your price: $21.39

Channel Master 3412 Mini Distribution Multi-Media Drop Amplifier 2 Port CM3412 Signal Distribution Amplifier TV RF Output Booster Amp Multimedia 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-M

Channel Master PCT-MA2-M Mini Video Amplifier by PCT!!!

After setting the industry standard for performance and price, Channel Master is now giving you more space to relieve congested installs and the ability to add new services through existing NIDs.

Features:

• Small form factor for ease of installation in confined spaces.
• Lightweight powder coated and weather sealed housing for superior corrosion protection.
• Same performance required by the major television companies.
• Compact design for easy installation in many locations.
• Supports both analog and digital broadcast signals.
• Supports cable modem applications.
• 2 Output Port
• Operating Frequency: 54 - 1002 MHz
• Return Path: 5 - 42 MHz
• Amplifier Gain: 11.5 dB
• Noise Figure: 2.7 dB Average
• Isolation (Output to Output): 22 dB
• Output Level: 21.5 dBmV
• LED power indicator
• Passive Return
• 6 kV, 3kA combination wave (B3) surge withstand on all "F" ports.
• Precision machined SCTE compliant sealed "F" ports.
• Patented DSM seizure technology provides better performance than 360 degree contacts.
• 5-year warranty

Specifications:

• Powering
  • Direct via “PWR IN” F-port
  • Drop-Line via power inserter MPI-1G
  • Power adapter optional
• Input / Output Connectors
  • SCTE compliant F-Female (standard PCT-F61DSM)
  • Machined brass, Nickel plated
• Blocking Capacitors
  • Standard on all ports
• Surge Withstand
  • IEEE C62.41-1991 Category
  • B3 (6kV) for all RF ports
• Operating Temperature
  • -40 to 60 C (-40 to 140 F)
• Housing
  • Cast aluminum with powder coating with weather seal

Includes:

• Mini Digital Video Amplifier
• Power Supply
• Power Supply Cable

Retail Price: $42.95

Our Discounted Price: $21.39

Bi-Directional Drop Amplifier Digital 15 dB CATV 1 GHz Distribution 5 - 42 MHz Return Path 54 - 1000 MHz Forward Cable HDTV 2-Way Ultra Mini Multi-Media Channel Master 3410 CM3410 UHF VHF Signal 1 Port TV RF Output Booster Amp Multimedia, Part # PCT-MA2-M

Your price: $22.85

Bi-Directional Drop Amplifier Digital 15 dB CATV 1 GHz Distribution 5 - 42 MHz Return Path 54 - 1000 MHz Forward Cable HDTV 2-Way Ultra Mini Multi-Media Channel Master 3410 CM3410 UHF VHF Signal 1 Port TV RF Output Booster Amp Multimedia, Part # PCT-MA2-M

Channel Master PCT-MA2-M Ultra Mini Video Amplifier by PCT!!!

After setting the industry standard for performance and price, Channel Master is now giving you more space to relieve congested installs and the ability to add new services through existing NIDs.

Features:

• Ultra small form factor for ease of installation in confined spaces.
• Lightweight powder coated and weather sealed housing for superior corrosion protection.
• Same performance required by the major television companies.
• Compact design for easy installation in many locations.
• Supports both analog and digital broadcast signals.
• Supports cable modem applications.
• 1 Output Port
• Operating Frequency: 54 - 1002 MHz
• Return Path: 5 - 42 MHz
• Amplifier Gain: 15 dB
• LED power indicator
• Passive Return
• 6 kV, 3kA combination wave (B3) surge withstand on all "F" ports.
• Precision machined SCTE compliant sealed "F" ports.
• Patented DSM seizure technology provides better performance than 360 degree contacts.
• 5-year warranty

Specifications:

• Powering
  • Direct via “PWR IN” F-port
  • Drop-Line via power inserter MPI-1G
  • Power adapter optional
• Input / Output Connectors
  • SCTE compliant F-Female (standard PCT-F61DSM)
  • Machined brass, Nickel plated
• Blocking Capacitors
  • Standard on all ports
• Surge Withstand
  • IEEE C62.41-1991 Category
  • B3 (6kV) for all RF ports
• Operating Temperature
  • -40 to 60 C (-40 to 140 F)
• Housing
  • Cast aluminum with powder coating with weather seal

Includes:

• Ultra Mini Digital Video Amplifier
• Power Supply
• Power Supply Cable

Retail Price: $39.95

Our Discounted Price: $22.85

Channel Master 3412 Mini Digital 2 Output Distribution Amplifier 2 Way Port 12 dB Gain Multi-Media Drop Amp CM3412 Signal Distribution Amplifier TV RF Booster Amp Multimedia 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-M

Your price: $21.39

Channel Master 3412 Mini Digital 2 Output Distribution Amplifier 2 Way Port 12 dB Gain Multi-Media Drop Amp CM3412 Signal Distribution Amplifier TV RF Booster Amp Multimedia 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-M

Channel Master PCT-MA2-M Mini Video Amplifier by PCT!!!

After setting the industry standard for performance and price, Channel Master is now giving you more space to relieve congested installs and the ability to add new services through existing NIDs.

Features:

• Small form factor for ease of installation in confined spaces.
• Lightweight powder coated and weather sealed housing for superior corrosion protection.
• Same performance required by the major television companies.
• Compact design for easy installation in many locations.
• Supports both analog and digital broadcast signals.
• Supports cable modem applications.
• 2 Output Port
• Operating Frequency: 54 - 1002 MHz
• Return Path: 5 - 42 MHz
• Amplifier Gain: 11.5 dB
• Noise Figure: 2.7 dB Average
• Isolation (Output to Output): 22 dB
• Output Level: 21.5 dBmV
• LED power indicator
• Passive Return
• 6 kV, 3kA combination wave (B3) surge withstand on all "F" ports.
• Precision machined SCTE compliant sealed "F" ports.
• Patented DSM seizure technology provides better performance than 360 degree contacts.
• 5-year warranty

Specifications:

• Powering
  • Direct via “PWR IN” F-port
  • Drop-Line via power inserter MPI-1G
  • Power adapter optional
• Input / Output Connectors
  • SCTE compliant F-Female (standard PCT-F61DSM)
  • Machined brass, Nickel plated
• Blocking Capacitors
  • Standard on all ports
• Surge Withstand
  • IEEE C62.41-1991 Category
  • B3 (6kV) for all RF ports
• Operating Temperature
  • -40 to 60 C (-40 to 140 F)
• Housing
  • Cast aluminum with powder coating with weather seal

Includes:

• Mini Digital Video Amplifier
• Power Supply
• Power Supply Cable

Retail Price: $42.95

Our Discounted Price: $21.39

24 dB HDTV Distribution Amplifier 4-Output Bi-Directional Signal 4-Way Port CATV Eagle Aspen HDA-4P Ultra Low Noise Off-Air Digital RF Amp Analog 54-806 MHz Forward and 5-42 MHz Reverse, Part # HDA4P

Your price: $32.95

24 dB HDTV Distribution Amplifier 4-Output Bi-Directional Signal 4-Way Port CATV Eagle Aspen HDA-4P Ultra Low Noise Off-Air Digital RF Amp Analog 54-806 MHz Forward and 5-42 MHz Reverse, Part # HDA4P

Ultra Low Noise HDTV Amplifier. 24 dB High Gain, High Signal Handling. Use with off-air, CATV, Digital and Analog broadcasts.

Specifications:

• 4 Coaxial F Output Ports
• 24 dB High Gain Distribution Amp
• Forward Path 54-806 MHz
• Reverse Path 5-42 MHz
• Ultra Low Noise
• Power Supply Output Voltage 12V, 200mA
• Class 2 Transformer
• Impedance 75 Ohms

Retail Price: $64.95

Our Discounted Price: $32.95

2 Port 12 dB Two Way Distribution Amp VHF UHF Drop Amplifier Signal Channel Master 3412 Mini Distribution Multi-Media CM3412 TV RF Output Booster Amp Multimedia 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-M

Your price: $21.39

2 Port 12 dB Two Way Distribution Amp VHF UHF Drop Amplifier Signal Channel Master 3412 Mini Distribution Multi-Media CM3412 TV RF Output Booster Amp Multimedia 5-42 / 54-1002 MHz Passive Return, Part # PCT-MA2-M

Channel Master PCT-MA2-M Mini Video Amplifier by PCT!!!

After setting the industry standard for performance and price, Channel Master is now giving you more space to relieve congested installs and the ability to add new services through existing NIDs.

Features:

• Small form factor for ease of installation in confined spaces.
• Lightweight powder coated and weather sealed housing for superior corrosion protection.
• Same performance required by the major television companies.
• Compact design for easy installation in many locations.
• Supports both analog and digital broadcast signals.
• Supports cable modem applications.
• 2 Output Port
• Operating Frequency: 54 - 1002 MHz
• Return Path: 5 - 42 MHz
• Amplifier Gain: 11.5 dB
• Noise Figure: 2.7 dB Average
• Isolation (Output to Output): 22 dB
• Output Level: 21.5 dBmV
• LED power indicator
• Passive Return
• 6 kV, 3kA combination wave (B3) surge withstand on all "F" ports.
• Precision machined SCTE compliant sealed "F" ports.
• Patented DSM seizure technology provides better performance than 360 degree contacts.
• 5-year warranty

Specifications:

• Powering
  • Direct via “PWR IN” F-port
  • Drop-Line via power inserter MPI-1G
  • Power adapter optional
• Input / Output Connectors
  • SCTE compliant F-Female (standard PCT-F61DSM)
  • Machined brass, Nickel plated
• Blocking Capacitors
  • Standard on all ports
• Surge Withstand
  • IEEE C62.41-1991 Category
  • B3 (6kV) for all RF ports
• Operating Temperature
  • -40 to 60 C (-40 to 140 F)
• Housing
  • Cast aluminum with powder coating with weather seal

Includes:

• Mini Digital Video Amplifier
• Power Supply
• Power Supply Cable

Retail Price: $42.95

Our Discounted Price: $21.39

CableTronix 4 Way A/V Distribution Amplifier HDTV 1 In 4 Out Composite Video Connections Stereo RCA Plug Connection 1x4 with Built-In Power Supply, 1 Input and 4 Output, Multi-Monitor Viewing, Part # CT-AV1X4

Your price: $25.95

CableTronix 4 Way A/V Distribution Amplifier HDTV 1 In 4 Out Composite Video Connections Stereo RCA Plug Connection 1x4 with Built-In Power Supply, 1 Input and 4 Output, Multi-Monitor Viewing, Part # CT-AV1X4

This product is no longer available for purchase.

It has been replaced by the Digiwave DGS-CA101 Distribution Amp !!!!

Easily Split 1 Audio Video Signal into 4 Audio Video Signals!!!

Splits video and stereo audio output signals from VCR and other video source to as many as four other VCRs or monitors without signal loss. Great for use with multi-VCRs, surveillance camera setups, or camcorder to VCR dubbing setups. Helps prevent signal loss from long cable runs.

CableTronix 4-Set Audio Video Distribution Amplifier. Splits video and stereo audio output from VCR or other video to up to four other VCRs or monitors without signal loss from long cable runs. Great for multi-VCRs, surveillance camera, camcorder to VCR dubbing setups AC operation, UL Listed.

Specifications:

• 4 Video Outputs
• 4 Left / Right Audio Outputs
• Input Voltage: 120V AC 60Hz
• Output Voltage: 15V DC 150mA
• Class 2 Power Unit
• AC/DC Adapter Included

Retail Price: $59.95

Our Discounted Price: $25.95

Eagle Aspen HDA-200 24 dB Digital Distribution Amplifier HDTV CATV Off-Air Bi-Directional Signal Low Noise RF Amp Analog with Adjustable Gain 54-1000 MHz Forward and 12 dB 5-42 MHz Reverse, 1GHz, Part # HDA200

Your price: $39.95

Eagle Aspen HDA-200 24 dB Digital Distribution Amplifier HDTV CATV Off-Air Bi-Directional Signal Low Noise RF Amp Analog with Adjustable Gain 54-1000 MHz Forward and 12 dB 5-42 MHz Reverse, 1GHz, Part # HDA200

Eagle Aspen HDA-200 HDTV Distribution Amplifier!!!

Specifications:

• Forward Path 54-1,000 MHz
• Reverse Path 5-42 MHz
• Forward Gain 24dB
• Reverse Gain (Loss) 12dB
• Noise Figure 4dB Typical, 5dB Max
• Return Loss (In) 14dB, 15dB (out)
• Power Supply Voltage 12V, 200mA
• Surge Protection (All ports) 6KV Connections F Type Female
• Impedance 75 Ohms
• Operating Temperature -40C to +60C
• FM Trap

Retail Price: $79.95

Our Discounted Price: $39.95

Linear Video Distribution Bi-Directional RF Amplifier Panel Satellite CATV DA-550BID Video 12V IR 8-Way 1 GHz High Headroom DA550BID Video Hub Module with 5 - 42 MHz Return Path, Rack Mountable Video Systems, Part # DA550-BID

Your price: $145.85

Linear Video Distribution Bi-Directional RF Amplifier Panel Satellite CATV DA-550BID Video 12V IR 8-Way 1 GHz High Headroom DA550BID Video Hub Module with 5 - 42 MHz Return Path, Rack Mountable Video Systems, Part # DA550-BID

Linear DA-550BID Bi-Directional RF Distribution Amplifier with 12V IR

The Model DA-550BID Bi-directional RF Distribution Amplifier with 12-volt IR is the heart of a multi-room distribution system with outputs to eight televisions with coax runs up to 150 feet. The Model DA-550BID has three inputs, one from CATV and two from Channel Plus 5400, 5500, or SVM series modulators. The Model DA-550BID can handle an extremely wide range of input signals from NTSC and digital TV. The Model DA-550BID offers a 5-42 MHz bandwidth return path for bi-directional communication for use with digital cable interactive set-top boxes.

The Model DA-550BID can be powered locally with its included power supply or remotely from up to 75 feet away by using an in-wall power injector wall plate Model 2010 or any 5500 series or SVM series modulator.

The Model DA-550BID offers optional IR control of connected video sources and whole house IR integration with a built-in 12-volt IR engine. Adding a Model 2100A wall plate and a 12-volt IR target to the coax run of any room allows IR signals to be routed to either a Model 2010 wall plate, 5500 series, or SVM series modulator.

Specifications:

• 54 MHz to 1 GHz forward bandwidth
• 5 MHz to 42 MHz reverse bandwidth
• 3 dB nominal gain on TV outputs
• Maximum input level 20 dBmv
• Can be used in locations without electrical access and powered remotely with a Channel Plus modulator or the Model 2010 wall plate.
• Dimension: 6.5" W x 1.25" H x 4.5" D

Retail Price: $199.95

Our Discounted Price: $145.85

10 dB Distribution Amplifier UHF VHF Video Coaxial Cable TV Video Broadband Signal In-line Booster Signal CATV Single Input Output FM Trap Switchable FM Attenuation UL Listed

Your price: $6.87

10 dB Distribution Amplifier UHF VHF Video Coaxial Cable TV Video Broadband Signal In-line Booster Signal CATV Single Input Output FM Trap Switchable FM Attenuation UL Listed

This product is no longer available for purchase.

Please check out our Antenna Pre-Amplifier Section for similar products!!!!

The simple design allows for fast and easy hook-up.

Features:

• Steren 200-656 UHF VHF Distribution Amplifier
• TV/Video Signal Amplifier
• Easy Installation.
• Low Noise
• Indoor Use

Specifications:

• Bandwidth: 47 - 900 MHz
• Gain: VHF 10 dB, UHF 7 dB
• Response Flatness: +- 2 dB
• Max Input: 32 dBmV
• Impedance: 75 Ohms (1 Input, 1 Output)

Retail Price: $14.95

Our Discounted Price: $6.87

Steren Digital 2-Output Distribution Amplifier Terrestrial Signal 24 dB VHF/UHF/FM Dual Output Signal Booster Amp TV Aerial Antenna Broad Band Amp, 2 Way Audio Video

Your price: $14.95

Steren Digital 2-Output Distribution Amplifier Terrestrial Signal 24 dB VHF/UHF/FM Dual Output Signal Booster Amp TV Aerial Antenna Broad Band Amp, 2 Way Audio Video

2 way amplifier broad band VHF/UHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. This item may be substituted upon order fulfillment.

Retail Price: $27.95

Our Discounted Price: $14.95

15 dB Signal Digital Distribution Amplifier Antenna CATV 54 - 1000 MHz Low Noise Winegard HDA-100 Broadcast Off-Air Aerial Video Amp with RF Input, 12 VDC Industrial Weather Resistant Design, Part # HDA100

Your price: $33.85

15 dB Signal Digital Distribution Amplifier Antenna CATV 54 - 1000 MHz Low Noise Winegard HDA-100 Broadcast Off-Air Aerial Video Amp with RF Input, 12 VDC Industrial Weather Resistant Design, Part # HDA100

Clearly the Worlds Best!!!

Winegard's new HDA series of Distribution Amplifiers was designed to meet the market demand for a heavy duty, quality built, cost effective solution for the amplification and distribution of analog/digital broadcast signals from Off-Air and cable TV stations. The HDA-100 is housed in an industrial grade, weather resistant enclosure. Each unit has an RF input, amplifier also provides a 5 - 42 MHz 2-way bi-pass.

The Winegard HDA-100 is a single RF input, 15 dB gain, single RF output, with a 5 - 42 MHz 2-way bi-pass at -2 dB loss.

Specifications:

• Bandpass Forward: 54 - 1000 MHz
• Bandpass Reverse: 5 - 42 MHz
• Gain: 15 dB
• Reverse Gain: -2 dB
• Noise Figure: 3 dB
• Power Supply Voltage: 12VDC - 200mA

Retail Price: $89.95

Our Discounted Price: $33.85

24 dB HDTV Digital Distribution Amplifier 2-Output Bi-Directional Signal 2-Way Port Eagle Aspen HDA-2P Ultra Low Noise CATV Off-Air Signal RF Amp Analog 54-806 MHz Forward and 5-42 MHz Reverse, Part # HDA2P

Your price: $29.95

24 dB HDTV Digital Distribution Amplifier 2-Output Bi-Directional Signal 2-Way Port Eagle Aspen HDA-2P Ultra Low Noise CATV Off-Air Signal RF Amp Analog 54-806 MHz Forward and 5-42 MHz Reverse, Part # HDA2P

Ultra Low Noise HDTV Amplifier. 24 dB High Gain, High Signal Handling. Use with off-air, CATV, Digital and Analog broadcasts.

Specifications:

• 2 Coaxial F Output Ports
• 24 dB High Gain Distribution
• Forward Path 54-806 MHz
• Reverse Path 5-42 MHz
• Ultra Low Noise
• Power Supply Output Voltage 12V, 200mA
• Class 2 Transformer
• Impedance 75 Ohms

Retail Price: $59.95

Our Discounted Price: $29.95

6 dB Signal Amplifier 2-Output Distribution UHF/VHF 2-Way RF Video Amp Steren 200-652 Signal Television Signal Aerial Booster Coaxial Cable Single Input Dual Output Connection, Part # 200652

Your price: $11.95

6 dB Signal Amplifier 2-Output Distribution UHF/VHF 2-Way RF Video Amp Steren 200-652 Signal Television Signal Aerial Booster Coaxial Cable Single Input Dual Output Connection, Part # 200652

The simple design allows for easy hook-up. The dual output allows for all TV hook-ups.

Features:

• Steren 200-652 UHF VHF Distribution Amplifier
• TV/Video Signal Amplifier
• Easy Installation.
• Low Noise
• Indoor Use

Specifications:

• Bandwidth: 47 - 900 MHz
• Gain: VHF 6 dB, UHF 3 dB
• Response Flatness: +- 2 dB
• Max Input: 32 dBmV
• Impedance: 75 Ohms (1 Input, 2 Output)

Retail Price: $19.95

Our Discounted Price: $11.95

Linear DA-506BID 6 Output Bi-Directional RF 1 X 6 Coaxial Panel Distribution Amplifier DA506BID Video Hub Module with 5 - 42 MHz Return Path for DTV / CATV Rack Mountable Video Distribution Systems, Part # DA506-BID

Your price: $65.49

Linear DA-506BID 6 Output Bi-Directional RF 1 X 6 Coaxial Panel Distribution Amplifier DA506BID Video Hub Module with 5 - 42 MHz Return Path for DTV / CATV Rack Mountable Video Distribution Systems, Part # DA506-BID

Linear DA-506BID Bi-Directional RF Distribution Amplifier

The Model DA-506BID Bi-directional RF Distribution Amplifier creates an ideal entry-level product for broadband distribution. Encased in an extruded aluminum shell, the Model DA-506BID meets the needs of small distribution systems which do not require IR control or modulator inputs. The Model DA-506BID has one input for CATV or off-air antenna and six outputs for televisions. Four outputs are for televisions up to 75 feet away and 2 outputs can be used up to 150 feet away. The DA-506BID has bi-directional capabilities with a 5-42 MHz bandwidth return path on the CATV/antenna input. This allows compatibility with interactive CATV set top boxes. Grid mount ears are included for mounting in the Model 2619 Rack-mount grid. The DA-506BID is compatible with broadcast DTV Television signals on the VHF & UHF bands. Please Note: The DA-506BID is not compatible with digital or analog CATV signals above 806 MHz (CATV channels 127-140).

Specifications:

• 54 MHz to 806 MHz forward bandwidth
• 5 MHz to 42 MHz reverse bandwidth
• 1 dB nominal gain on "short" TV outputs (4 Ports)
• 4 dB nominal gain on "long" TV outputs (2 Ports)
• ±1.5 dB gain flatness
• Maximum input level 20 dBmv
• Dimensions: 6.3" W x 1.25" H x 4.5 D"

Retail Price: $109.95

Our Discounted Price: $65.49

Linear DA-520A 20 dB Bi-Directional Cable RF Amplifier FRWD / ODB Reverse DA520A Coaxial Signal Amplifier Video Module with 54 MHz - 1 GHz Forward Bandwidth for DTV / CATV Video Distribution Systems, Part # DA520-A

Your price: $49.95

Linear DA-520A 20 dB Bi-Directional Cable RF Amplifier FRWD / ODB Reverse DA520A Coaxial Signal Amplifier Video Module with 54 MHz - 1 GHz Forward Bandwidth for DTV / CATV Video Distribution Systems, Part # DA520-A

Linear DA-520A Bi-Directional 12V RF DTV/CATV Signal Amplifier

The Model DA-520A Bi-directional RF Amplifier provides 20 dB of gain in a CATV or antenna system. The Model DA-520A has bi-directional capabilities with a 5-40 MHz bandwidth return path. This allows compatibility with interactive CATV set top boxes. A 12 VDC Model 999-017-01 power supply is included.

Specifications:

• 54 MHz to 1 GHz forward bandwidth
• 5 MHz to 40 MHz reverse bandwidth
• ±1.5 dB gain flatness
• Maximum input level 30 dBmv
• Dimensions: 3.5" W x 1.2" H x 2.5" D

Retail Price: $79.95

Our Discounted Price: $49.95

Eagle Aspen 20 dB In-Line Satellite Amplifier 2150 MHz Signal Booster 950-2200 MHz 13 - 20 Volt Amp LNB Dish TV Video DSS DBS Antenna Coaxial Cable Slope Compensated, Part # SA-2050+, SA2050

Your price: $2.79

Eagle Aspen 20 dB In-Line Satellite Amplifier 2150 MHz Signal Booster 950-2200 MHz 13 - 20 Volt Amp LNB Dish TV Video DSS DBS Antenna Coaxial Cable Slope Compensated, Part # SA-2050+, SA2050

Eagle Aspen SA-2050+ 950-2200 MHz in-line amplifier designed to amplify the signal between the LNB and the receiver for long drops. Slope compensated, the signal 18 dB at 1450 MHz. Housed in a heavy duty solder-back case. Powered by the receiver and passed through to the LNB.

Specifications:

• SA-2050+ In-Line Amplifier, Slope Compensated
• Frequency: 950-2150 MHz
• 950 MHz Gain: 13.0 dB
• 1200 MHz Gain: 14.5 dB
• 1450 MHz Gain: 16.0 dB
• 1750 MHz Gain: 17.0 dB
• 2050 MHz Gain: 19.0 dB
• 2150 MHz Gain: 19.5 dB
• Noise Figure: < 6 dB (typ.)
• Max Output Range: 8 dB
• Input and Output Impedance: 75 ?
• Input and Output Connectors: F-Female
• Operating Voltage: 16 ? 3 VDC
• Power Consumption: 50 mA (typ.)
• Power Passing: 1000 mA
• RFI Shielding: > 100 dB

Retail Price: $5.95

Our Discounted Price: $2.79

Perfect Vision 20 dB UHF/VHF/FM Distribution Amplifier with Adjustable Gain Control Indoor Television Aerial Antenna 75 Ohm Audio Video Signal Booster Amp, 120 VAC, Part # PV20DB

Your price: $16.49

Perfect Vision 20 dB UHF/VHF/FM Distribution Amplifier with Adjustable Gain Control Indoor Television Aerial Antenna 75 Ohm Audio Video Signal Booster Amp, 120 VAC, Part # PV20DB

This indoor distribution amplifier is designed to work under almost any custom installation requirements. The adjustable gain on this amp allows the installer to tailor this amp to just the right amount of amplification.

Specifications:

• Frequency Range: 47 - 900 MHZ
• Max Input: VHF 40 dBmV, UHF 20 dBmV
• Gain: VHF 20 dB, UHF 21 dB
• Noise: VHF 6 dB, UHF 8 dB
• Gain Control: 10 dB
• Power Requirements: 117 VAC -60 HZ

Retail Price: $29.95

Our Discounted Price: $16.49

CableTronix 1 x 4 Composite Video Audio Distribution Amplifier CT-400 4 Way Composite Video HDTV Signal Source 1 In 4 Out with Left Right Baseband Audio 1x4 Output with Power Supply, 1 Input / 4 Output, Part # CT400

Your price: $39.95

CableTronix 1 x 4 Composite Video Audio Distribution Amplifier CT-400 4 Way Composite Video HDTV Signal Source 1 In 4 Out with Left Right Baseband Audio 1x4 Output with Power Supply, 1 Input / 4 Output, Part # CT400

This product is no longer available for purchase.

It has been replaced by the CableTronics CT-700 Distribution Amp!!!!

1 x 4 Composite Video / Audio Signal Distribution Amplifier!!!

The CT-400 is designed to distribute a single audio/video source to up to 4 destinations. A composite video source with left and right baseband audio can be split to 4 separate locations with no loss of signal quality. The unit has been designed with all RCA connections for ease of use. Units can be daisy chained to supply more than 4 outputs. The CT-400 is perfect for splitting the composite output or DVR to up to 4 destinations including display monitors, DVRs, televisions and VCRs. Compact design and affordable pricing make the CT-400 a perfect item to keep on hand in every installation vehicle.

Product Specifications:

• One set of RCA Composite Video and Audio Inputs.
• Four sets of RCA Composite Video and Audio Outputs.
• Ideal for Composite Signal Sources.
• Maintains original A/V signal strength for distribution.
• Can be "Daisy Chained" to supply more than 4 outputs.

Video Specifications:

• Gain: 2 Volt Unterminated, 1 Volt Terminated
• Input Impedance: 75 Ohm +/- 5%
• Output Impedance: 75 Ohm +/- 5%
• Video Insertion Loss: 50 Hz to 10 MHz < 40 dB
• In to Out Isolation: 50 Hz to 10 MHz 32 dB
• Out to In Isolation: 50 Hz to 10 MHz 60 dB
• Return Loss: 50 Hz to 10 MHz 20 dB
• Video Bandwidth: > 10 MHz
• Audio Response: > 100 kHz

Audio Specifications:

• Gain: Unity
• Input Impedance: 22 K Ohm
• Output Impedance: 1 K Ohm
• THD: 0.05% @ 1.0 Volts Input
• Frequency Response: 20 Hz to 100 kHz
• Channel Separation: > 75 dB @ 1 kHz
• In to Out Isolation: 60 dB
• Out to In Isolation: 60 dB
• Signal to Noise: 100 dB @ 2 Volts (out)
• A/V Input/Output Jacks: RCA Type Phono Jacks
• Audio Response: > 100 kHz

Power Specifications:

• 15 Volts DC @ 400 mA with 2.5 mm Power Jack

Retail Price: $69.95

Our Discounted Price: $39.95

CableTronix CT-9X1HD 1 x 9 Component HDTV Digital Video Audio Distribution Amplifier Splitter 1x9 Output Component Signal 1 In 9 Out with Power Supply, 1 Input / 9 Output, Part # CT9X1HD

Your price: $121.95

CableTronix CT-9X1HD 1 x 9 Component HDTV Digital Video Audio Distribution Amplifier Splitter 1x9 Output Component Signal 1 In 9 Out with Power Supply, 1 Input / 9 Output, Part # CT9X1HD

1 x 9 Component HD Audio/Video Signal Distribution Amplifier!!!

The CT-9X1HD is designed to distribute a single audio/video source to up to 9 destinations. An HD component video source with left and right baseband audio can be split to 9 separate locations with no loss of signal quality. The unit has been designed with all RCA connections for ease of use. Units can be daisy chained to supply more than 9 outputs. The CT-9X1HD is perfect for splitting the component output of a DVD player, VCR, satellite receiver or DVR to up to 9 destinations including display monitors, DVRs, televisions and VCRs. Compact design and affordable pricing make the CT-9X1HD a perfect item to keep on hand in every installation vehicle.

Product Specifications:

• One set of RCA Component Video, Composite Video, Composite Audio and Digital Audio Inputs.
• Nine sets of RCA Component Video, Composite Video, Composite Audio and Digital Audio Outputs.
• Ideal for High Definition Signal Sources.
• Maintains original A/V signal strength for distribution.
• Supports 480i, 480p, 720p, 1080i, and 1080p Resolutions.
• Can be "Daisy Chained" to supply more than 4 outputs.

Video Specifications:

• Normal Input Level: 1 Volt Peak to Peak
• Gain: 2 Volt Unterminated, 1 Volt Terminated
• Input Impedance: 75 Ohm +/- 5%
• Output Impedance: 75 Ohm +/- 5%
• Port to Port Isolation: 32 dB
• Out to In Isolation: 60 dB
• Return Loss: 18 dB
• Video Bandwidth: > 100 MHz

Analog Audio Specifications:

• Normal Input Level: 1 Volt Peak to Peak
• Gain: Unity
• Input Impedance: 22 K Ohm
• Output Impedance: 1 K Ohm
• THD: 0.05%
• Frequency Response: 20 Hz to 100 kHz
• Channel Separation: > 75 dB
• Port to Port Isolation: 60 dB
• Out to In Isolation: 60 dB
• Signal to Noise: 100 dB @ 2 Volts (out)

Digital Audio Specifications:

• Supports standard SPDIF Digital Audio.
• Unity Gain when terminated into 75 Ohm (2x Gain High Imp.)
• Greater than 50 MHz of Bandwidth to ensure minimal degradation.

Power Specifications:

• External 9 Volt AC @ 1000 mA with a 2.1 mm Center Coaxial Connector (Included)

Retail Price: $179.95

Our Discounted Price: $121.95

Linear DA-8200HHR Video Distribution Amplifier 8-Way High-Headroom RF Off-Air DTA / CATV DA8200HHR 3 dB Gain with 5 Volt IR Video Hub Module 54 MHz - 1 GHz Forward Path Rack Mountable, Part # DA8200-HHR

Your price: $146.85

Linear DA-8200HHR Video Distribution Amplifier 8-Way High-Headroom RF Off-Air DTA / CATV DA8200HHR 3 dB Gain with 5 Volt IR Video Hub Module 54 MHz - 1 GHz Forward Path Rack Mountable, Part # DA8200-HHR

Linear DA-8200HHR High-Headroom RF Distribution Amplifier with 5V IR

The Model DA-8200HHR High-headroom RF Distribution Amplifier with 5-volt IR is the heart of a multi-room distribution system with outputs to eight televisions with coax runs up to 150 feet. The Model DA-8200HHR has three inputs, one from off-air antenna or CATV and two from Channel Plus 5400, 5500, or SVM series modulators. The DA-8200HHR is used with antenna applications for off-air digital and NTSC signals.

The Model DA-8200HHR can be powered locally with its included power supply or remotely from up to 75 feet away by using an in-wall power injector wall plate Model 2010 or any 5500 series or SVM series modulator.

The Model DA-8200HHR features optional IR control of connected video sources and whole house IR integration with a built-in 5-volt IR engine. Model 2133 set-top IR targets connect between the amplifier outputs and the television sets. IR emitters connected to the amplifier, or to a 5500 or SVM series IR enabled modulator connected to the amplifier, will repeat the IR remote control signals back to the video source component.

Specifications:

• 54 MHz to 1 GHz forward bandwidth
• 3 dB nominal gain on TV outputs
• Maximum input level 20 dBmv
• Can be used in locations without electrical access and powered remotely with a Channel Plus modulator or the Model 2010 wall plate.
• Dimensions: 6.5" W x 1.25" H x 4.5 D"

Retail Price: $229.95

Our Discounted Price: $146.85

Channel Plus SVC-10R S-Video Digital Distribution Receiver Converts Signal from CAT 5 to Composite and S-Video Outputs S-Video CAT5 Distribution System with 12 Volt IR, Part # SVC10R

Your price: $68.89

Channel Plus SVC-10R S-Video Digital Distribution Receiver Converts Signal from CAT 5 to Composite and S-Video Outputs S-Video CAT5 Distribution System with 12 Volt IR, Part # SVC10R

Channel Plus SVC-10R CAT-5 S-Video Receiver with 12V IR

The Model SVC-10R S-Video Cat-5 Receiver with 12-volt IR works with the Model SVC-10 S-video Cat-5 Distribution System to deliver true, unconverted S-video or composite video, digital audio or analog audio over Cat-5 up to 1,000 feet away. Simply place the SVC-10 transmitter at the source and the SVC-10R receiver (included with the SVC-10 transmitter and sold separately) at a remote location. The integrated IR makes it possible to control the source with a click of the remote (IR targets and emitters sold separately).

Specifications:

• Composite & S-video outputs
• Coax digital & analog audio outputs
• 12-volt IR target input
• RJ-45 Cat-5 input
• Compact size: 4.6" W x 1.0" H x 3.2" D

Retail Price: $99.95

Our Discounted Price: $68.89

Channel Plus 2184 1 x 4 IR Repeater Emitter Expansion Breakout Block 12 Volt for Compatible Video Distribution Amplifier Systems, 4 Position Expansion Terminal Block, Part # CP2184

Your price: $24.75

Channel Plus 2184 1 x 4 IR Repeater Emitter Expansion Breakout Block 12 Volt for Compatible Video Distribution Amplifier Systems, 4 Position Expansion Terminal Block, Part # CP2184

Channel Plus 2184 IR Breakout Block

The Model 2184 IR Breakout Block allows local IR access on DA-550 and DA-8200 distribution amplifiers. The distribution amplifiers have a three-pin power connector. One of the connector's pins supplies the IR remote control signals received from IR targets connected to the amplifier. Attach the Model 2184 to the amplifier's power connector and up to four IR emitters may be connected directly to the Model 2184. To power the amplifier, the power supply transformer connects to the power jack on the Model 2184.

A four-position expansion terminal block on the Model 2184 provides termination for additional connections to DC power and IR emitter signals.

Specifications:

• Connects directly to DA-550 or DA-8200 distribution amplifiers
• Allows for local IR in enclosure
• Four emitter jacks
• One power jack
• One four-position expansion terminal block
• 1.3" W x 3.0" H x 0.8" D

Retail Price: $39.95

Our Discounted Price: $24.75

Channel Plus COMP-DA-1X3 1.3 Component Audio Distribution Amplifier Multiplex 3-Way Output by Gefen Distributes One HD Video Component Source with Audio to Three TV Locations, 1 Input to 3 Output, Part # COMPDA1X3

Your price: $143.95

Channel Plus COMP-DA-1X3 1.3 Component Audio Distribution Amplifier Multiplex 3-Way Output by Gefen Distributes One HD Video Component Source with Audio to Three TV Locations, 1 Input to 3 Output, Part # COMPDA1X3

Channel Plus COMP-DA-1X3 1:3 Component with Audio Distribution Amplifier

The Model COMP-DA-1X3 1:3 Component with Audio Distribution Amplifier is the perfect solution for anyone who needs to send one source of high definition component video and analog or digital audio to multiple displays at the same time. It supports Component equipment, such as DVD players, satellite set top boxes, and all Component displays. In operation, the component video source is connected to the distribution amplifier at the input. Three outputs are available to be used in part or in full. Once the unit is connected and powered, the source is distributed to three component high definition displays at the same time.

Simply connect the source’s component and audio cables to the 1:3’s input. Then, connect up to three Component displays to the 1:3’s outputs. Power on the unit and watch up to full High Definition 1080p on up to three displays without any signal loss or picture degradation. When two or more 1:3’s are connected together, you can create a larger video distribution system. Includes: 5 VDC Power Supply (regulatory approvals include UL and CE), and one 6' ft Component cable.

Features:

• Connects up to three Component displays at the same time to one video source
• Supports HDTV (Component, YPbPr, RGsB) and SD (Composite, YCbCr) input signals
• Supports HDTV resolutions up to 1080p
• Both analog and digital audio outputs are active

Specifications:

• Input: YPbPr x1 or RGsB x1 (or RGBHV), or Composite x1 1V p-p @ 75 Ohm
• Output: YPbPr x3, or RGsB (or RGBHV) x3, or Composite x3
• Audio input: Digital (SPDIF) x1 + R/L x1
• Audio output: Digital (SPDIF) x3 + R/L x3
• Analog audio input/output: Audio 2V rms max 47k Ohm
• Bandwidth: 480MHz (-3dB)
• Video Range: 480i, 480p, 720p, 1080i, and 1080p
• Dimensions: 5.5” W x 1.5” H x 3.65” D

Retail Price: $219.95

Our Discounted Price: $143.95

Linear COMP-DA-1X3 Component Audio Distribution Amplifier One to 3-Way Display Distributes One HD 1.3 Component Video Source with Audio to Three TV Locations, 1 Input to 3 Output, Part # COMPDA1X3

Your price: $143.95

Linear COMP-DA-1X3 Component Audio Distribution Amplifier One to 3-Way Display Distributes One HD 1.3 Component Video Source with Audio to Three TV Locations, 1 Input to 3 Output, Part # COMPDA1X3

Linear COMP-DA-1X3 1:3 Component with Audio Distribution Amplifier

The Model COMP-DA-1X3 1:3 Component with Audio Distribution Amplifier is the perfect solution for anyone who needs to send one source of high definition component video and analog or digital audio to multiple displays at the same time. It supports Component equipment, such as DVD players, satellite set top boxes, and all Component displays. In operation, the component video source is connected to the distribution amplifier at the input. Three outputs are available to be used in part or in full. Once the unit is connected and powered, the source is distributed to three component high definition displays at the same time.

Simply connect the source’s component and audio cables to the 1:3’s input. Then, connect up to three Component displays to the 1:3’s outputs. Power on the unit and watch up to full High Definition 1080p on up to three displays without any signal loss or picture degradation. When two or more 1:3’s are connected together, you can create a larger video distribution system. Includes: 5 VDC Power Supply (regulatory approvals include UL and CE), and one 6' ft Component cable.

Features:

• Connects up to three Component displays at the same time to one video source
• Supports HDTV (Component, YPbPr, RGsB) and SD (Composite, YCbCr) input signals
• Supports HDTV resolutions up to 1080p
• Both analog and digital audio outputs are active

Specifications:

• Input: YPbPr x1 or RGsB x1 (or RGBHV), or Composite x1 1V p-p @ 75 Ohm
• Output: YPbPr x3, or RGsB (or RGBHV) x3, or Composite x3
• Audio input: Digital (SPDIF) x1 + R/L x1
• Audio output: Digital (SPDIF) x3 + R/L x3
• Analog audio input/output: Audio 2V rms max 47k Ohm
• Bandwidth: 480MHz (-3dB)
• Video Range: 480i, 480p, 720p, 1080i, and 1080p
• Dimensions: 5.5” W x 1.5” H x 3.65” D

Retail Price: $219.95

Our Discounted Price: $143.95

Eagle Aspen POST-AMP 50 dB UHF/VHF/FM Dual Adjustable Signal Gain with 2 Switchable FM Trap Post Distribution Booster Amplifier High Output Antenna Aerial, Part # POSTAMP

Your price: $79.95

Eagle Aspen POST-AMP 50 dB UHF/VHF/FM Dual Adjustable Signal Gain with 2 Switchable FM Trap Post Distribution Booster Amplifier High Output Antenna Aerial, Part # POSTAMP

Eagle Aspen POST-AMP UHF/VHF/FM Distribution Amplifier!!!

This low cost amplifier is designed to amplify VHF/UHF/FM signals in residential applications. It features a built-in FM trap.

Features:

• 2 Switchable FM Traps
• Separate Gain Controls
• Low Noise
• -20 dB Monitor Output
• Excellent for Medium Size MATV Applications
• 50 dB Output Capacity

Specifications:

• Bandwidth:
  • VHF Low Band: 54 - 108 MHz
  • VHF High Band: 174 - 216 MHz
  • UHF Band: 470 - 812 MHz
• FM Traps: -20 dB @ 88 - 96 MHz, -20 dB @ 95 - 108 MHz
• Gain:
  • VHF 31 dB
  • UHF 36 dB
• Gain Control Range: 15 dB
• Noise Figure:
  • VHF 6 dB
  • UHF 7 dB
• Channels:
  • 7 Channels VHF:
    • Max Input: 20 dBmV
    • Max Output: 52 dBmV
  • 4 Channels UHF:
    • Max Input: 20 dBmV
    • Max Output: 56 dBmV
  • 12 Channels VHF:
    • Max Input: 11 dBmV
    • Max Output: 43 dBmV
  • 7 Channels UHF:
    • Max Input: 11 dBmV
    • Max Output: 45 dBmV
• Power Requirements: 117 VAC, 60 Hz, 9.5 W

Retail Price: $109.95

Our Discounted Price: $79.95

Linear TC-200A Tilt Compensator TC200A 1 Pack F-Connector High Frequency Attenuator In-Line Filter Female to Male Coupler with Female to Female Barrel Adapter, Part # TC-200A

Your price: $11.50

Linear TC-200A Tilt Compensator TC200A 1 Pack F-Connector High Frequency Attenuator In-Line Filter Female to Male Coupler with Female to Female Barrel Adapter, Part # TC-200A

Linear TC-200A In-Line High Frequency Tilt Compensator

The Model TC-200A Tilt Compensator is an in-line filter designed to create an attenuation loss equal and opposite to cable loss. Coaxial cable attenuates high frequencies greater than low frequencies. This problem is most severe when cascading amplifiers one after another. The signal differences are attenuated to a point where the high frequency signals are so small compared to the low frequency signals that the high frequency signals can no longer be received. The TC-200A Tilt Compensator provides a balanced signal level by compensating for 200 feet of coax cable loss and allowing all signal levels on all channels to be of equal amplitude at distant locations. Therefore, the picture quality on the higher channels will be maintained.

The TC-200A is designed to work with RG-6 coax cable carrying signals in the 5 MHz to 1 GHz range. When an RG-6 cable run reaches 200 feet, install a TC-200A Tilt Compensator whenever an amplifier stage follows. A female barrel connector is included with the TC-200A for in-line applications. The TC-200A is non-directional, the input can be connected to either end.

Specifications:

• Compensates for high frequency signal loss on long coax runs
• Female "F" and male "F" connectors
• Includes Female-Female barrel connector for in-line use

Retail Price: $19.95

Our Discounted Price: $11.50

50 dB Distribution Amplifier Post Video Signal UHF/VHF/FM Cable Eagle Aspen POST-AMP Dual Adjustable Signal Gain with 2 Switchable FM Trap Post Distribution Booster High Output Antenna Aerial, Part # POSTAMP

Your price: $79.95

50 dB Distribution Amplifier Post Video Signal UHF/VHF/FM Cable Eagle Aspen POST-AMP Dual Adjustable Signal Gain with 2 Switchable FM Trap Post Distribution Booster High Output Antenna Aerial, Part # POSTAMP

Eagle Aspen POST-AMP UHF/VHF/FM Distribution Amplifier!!!

This low cost amplifier is designed to amplify VHF/UHF/FM signals in residential applications. It features a built-in FM trap.

Features:

• 2 Switchable FM Traps
• Separate Gain Controls
• Low Noise
• -20 dB Monitor Output
• Excellent for Medium Size MATV Applications
• 50 dB Output Capacity

Specifications:

• Bandwidth:
  • VHF Low Band: 54 - 108 MHz
  • VHF High Band: 174 - 216 MHz
  • UHF Band: 470 - 812 MHz
• FM Traps: -20 dB @ 88 - 96 MHz, -20 dB @ 95 - 108 MHz
• Gain:
  • VHF 31 dB
  • UHF 36 dB
• Gain Control Range: 15 dB
• Noise Figure:
  • VHF 6 dB
  • UHF 7 dB
• Channels:
  • 7 Channels VHF:
    • Max Input: 20 dBmV
    • Max Output: 52 dBmV
  • 4 Channels UHF:
    • Max Input: 20 dBmV
    • Max Output: 56 dBmV
  • 12 Channels VHF:
    • Max Input: 11 dBmV
    • Max Output: 43 dBmV
  • 7 Channels UHF:
    • Max Input: 11 dBmV
    • Max Output: 45 dBmV
• Power Requirements: 117 VAC, 60 Hz, 9.5 W

Retail Price: $109.95

Our Discounted Price: $79.95

Linear SVC-10R S-Video Digital Distribution Receiver Converts Signal from CAT 5 to Composite and S-Video Outputs S-Video CAT5 Distribution System with 12 Volt IR, Part # SVC10R

Your price: $71.95

Linear SVC-10R S-Video Digital Distribution Receiver Converts Signal from CAT 5 to Composite and S-Video Outputs S-Video CAT5 Distribution System with 12 Volt IR, Part # SVC10R

Linear SVC-10R CAT-5 S-Video Receiver with 12V IR

The Model SVC-10R S-Video Cat-5 Receiver with 12-volt IR works with the Model SVC-10 S-video Cat-5 Distribution System to deliver true, unconverted S-video or composite video, digital audio or analog audio over Cat-5 up to 1,000 feet away. Simply place the SVC-10 transmitter at the source and the SVC-10R receiver (included with the SVC-10 transmitter and sold separately) at a remote location. The integrated IR makes it possible to control the source with a click of the remote (IR targets and emitters sold separately).

Specifications:

• Composite & S-video outputs
• Coax digital & analog audio outputs
• 12-volt IR target input
• RJ-45 Cat-5 input
• Compact size: 4.6" W x 1.0" H x 3.2" D

Retail Price: $119.95

Our Discounted Price: $71.95

Linear 2184 1 x 4 IR Repeater Emitter Expansion Breakout Block 12 Volt for Compatible Video Distribution Amplifier Systems, 4 Position Expansion Terminal Block, Part # CP2184

Your price: $25.95

Linear 2184 1 x 4 IR Repeater Emitter Expansion Breakout Block 12 Volt for Compatible Video Distribution Amplifier Systems, 4 Position Expansion Terminal Block, Part # CP2184

Linear 2184 IR Breakout Block

The Model 2184 IR Breakout Block allows local IR access on DA-550 and DA-8200 distribution amplifiers. The distribution amplifiers have a three-pin power connector. One of the connector's pins supplies the IR remote control signals received from IR targets connected to the amplifier. Attach the Model 2184 to the amplifier's power connector and up to four IR emitters may be connected directly to the Model 2184. To power the amplifier, the power supply transformer connects to the power jack on the Model 2184.

A four-position expansion terminal block on the Model 2184 provides termination for additional connections to DC power and IR emitter signals.

Specifications:

• Connects directly to DA-550 or DA-8200 distribution amplifiers
• Allows for local IR in enclosure
• Four emitter jacks
• One power jack
• One four-position expansion terminal block
• 1.3" W x 3.0" H x 0.8" D

Retail Price: $39.95

Our Discounted Price: $25.95

Vanco AMP5 Signal Amplifier UHF/VHF/FM 10 dB RF 4-Out Put Way Port Booster Distribution Amplifier UL Listed Four Port Signal Output 75 Ohm F Connection Television Antenna Aerial, Part # AMP-5

Your price: $13.49

Vanco AMP5 Signal Amplifier UHF/VHF/FM 10 dB RF 4-Out Put Way Port Booster Distribution Amplifier UL Listed Four Port Signal Output 75 Ohm F Connection Television Antenna Aerial, Part # AMP-5

DISTRIBUTION AMP, 10-DB UHF/VHF/FM, 4-OUTS, 47-900 MHz. 4 way amplifier broad band VHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. Eliminates the need for a four way splitter during installation. 10 decibel signal amplifier, 4 outputs. Designed to extend the system line where additional TV sets, VCR's etc, are required without loss of reception quality.

Specifications:

• TV/Video Frequency Response
• Easy Installation
• Low Noise Figure
• For Indoor Use Only

Retail Price: $23.95

Our Discounted Price: $13.49

High Performance RCA Audio Video Distribution Amplifier Four Way Output Composite One to One Ratio Commercial Grade CableTronix CT-400 1 x 4 Composite Distribution Amplifier with Power Supply, 1 Input / 4 Output, Part # CT400

Your price: $34.95

High Performance RCA Audio Video Distribution Amplifier Four Way Output Composite One to One Ratio Commercial Grade CableTronix CT-400 1 x 4 Composite Distribution Amplifier with Power Supply, 1 Input / 4 Output, Part # CT400

This product is no longer available for purchase.

It has been replaced by the CableTronics CT-700 Distribution Amp!!!!

1 x 4 Composite Video / Audio Signal Distribution Amplifier!!!

The CT-400 is designed to distribute a single audio/video source to up to 4 destinations. A composite video source with left and right baseband audio can be split to 4 separate locations with no loss of signal quality. The unit has been designed with all RCA connections for ease of use. Units can be daisy chained to supply more than 4 outputs. The CT-400 is perfect for splitting the composite output or DVR to up to 4 destinations including display monitors, DVRs, televisions and VCRs. Compact design and affordable pricing make the CT-400 a perfect item to keep on hand in every installation vehicle.

Product Specifications:

• One set of RCA Composite Video and Audio Inputs.
• Four sets of RCA Composite Video and Audio Outputs.
• Ideal for Composite Signal Sources.
• Maintains original A/V signal strength for distribution.
• Can be "Daisy Chained" to supply more than 4 outputs.

Video Specifications:

• Gain: 2 Volt Unterminated, 1 Volt Terminated
• Input Impedance: 75 Ohm +/- 5%
• Output Impedance: 75 Ohm +/- 5%
• Video Insertion Loss: 50 Hz to 10 MHz < 40 dB
• In to Out Isolation: 50 Hz to 10 MHz 32 dB
• Out to In Isolation: 50 Hz to 10 MHz 60 dB
• Return Loss: 50 Hz to 10 MHz 20 dB
• Video Bandwidth: > 10 MHz
• Audio Response: > 100 kHz

Audio Specifications:

• Gain: Unity
• Input Impedance: 22 K Ohm
• Output Impedance: 1 K Ohm
• THD: 0.05% @ 1.0 Volts Input
• Frequency Response: 20 Hz to 100 kHz
• Channel Separation: > 75 dB @ 1 kHz
• In to Out Isolation: 60 dB
• Out to In Isolation: 60 dB
• Signal to Noise: 100 dB @ 2 Volts (out)
• A/V Input/Output Jacks: RCA Type Phono Jacks
• Audio Response: > 100 kHz

Power Specifications:

• 15 Volts DC @ 400 mA with 2.5 mm Power Jack

Retail Price: $69.95

Our Discounted Price: $34.95

Pro Brand SA2050+ In-line Amplifier Satellite Signal 20 dB Booster 950-2200 MHz 13 - 20 Volt Amp LNB Dish TV Video DSS DBS Antenna Coaxial Cable Slope Compensated, Part # SA-2050

Your price: $2.69

Pro Brand SA2050+ In-line Amplifier Satellite Signal 20 dB Booster 950-2200 MHz 13 - 20 Volt Amp LNB Dish TV Video DSS DBS Antenna Coaxial Cable Slope Compensated, Part # SA-2050

Eagle Aspen SA-2050+ 950-2200 MHz in-line amplifier designed to amplify the signal between the LNB and the receiver for long drops. Slope compensated, the signal 18 dB at 1450 MHz. Housed in a heavy duty solder-back case. Powered by the receiver and passed through to the LNB.

Specifications:

• SA-2050+ In-Line Amplifier, Slope Compensated
• Frequency: 950-2150 MHz
• 950 MHz Gain: 13.0 dB
• 1200 MHz Gain: 14.5 dB
• 1450 MHz Gain: 16.0 dB
• 1750 MHz Gain: 17.0 dB
• 2050 MHz Gain: 19.0 dB
• 2150 MHz Gain: 19.5 dB
• Noise Figure: < 6 dB (typ.)
• Max Output Range: 8 dB
• Input and Output Impedance: 75 ?
• Input and Output Connectors: F-Female
• Operating Voltage: 16 ? 3 VDC
• Power Consumption: 50 mA (typ.)
• Power Passing: 1000 mA
• RFI Shielding: > 100 dB

Retail Price: $5.95

Our Discounted Price: $2.69

Channel Plus 2171 Single-Head IR Signal Emitter/Repeater Infrared Remote Repeater/Emitter Micro Head 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2171

Your price: $7.95

Channel Plus 2171 Single-Head IR Signal Emitter/Repeater Infrared Remote Repeater/Emitter Micro Head 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2171

Channel Plus 2171 Single Head IR Emitter

The Model 2171 Single-head IR Emitter connects to a video hub, 2100A and 2010 in-wall interface, or to a 5500 series IR enabled modulator connected to a video hub. The emitter will repeat the IR remote control signals received at an IR Target that were sent back through the coax cable to the video source component. The Model 2171 IR emitter has adhesive backing to allow sticking the emitter over the IR sensor on the faceplate of the video source component.

Specifications:

• Single-Head IR Emitter
• Compatible with 5 Volt and 12 Volt IR Systems
• 5' Foot Cord with Mini Plug
• For Use With:
  • Video Hubs
  • In-Wall Interfaces
  • 5500 Series Modulators
• 0.3" W x 0.5" H x 0.3" D

Retail Price: $19.95

Our Discounted Price: $7.95

Linear Technology 2171 Single IR Signal Emitter 5V and 12V 5' FT Cord Infrared Remote Repeater/Emitter Micro Head 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2171

Your price: $8.89

Linear Technology 2171 Single IR Signal Emitter 5V and 12V 5' FT Cord Infrared Remote Repeater/Emitter Micro Head 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2171

Linear 2171 Single Head IR Emitter

The Model 2171 Single-head IR Emitter connects to a video hub, 2100A and 2010 in-wall interface, or to a 5500 series IR enabled modulator connected to a video hub. The emitter will repeat the IR remote control signals received at an IR Target that were sent back through the coax cable to the video source component. The Model 2171 IR emitter has adhesive backing to allow sticking the emitter over the IR sensor on the faceplate of the video source component.

Specifications:

• Single-Head IR Emitter
• Compatible with 5 Volt and 12 Volt IR Systems
• 5' Foot Cord with Mini Plug
• For Use With:
  • Video Hubs
  • In-Wall Interfaces
  • 5500 Series Modulators
• 0.3" W x 0.5" H x 0.3" D

Retail Price: $19.95

Our Discounted Price: $8.89

Linear DA-8200BID RF Distribution Amplifier 8-Way 1 GHz Signal Bi-Directional 3 dB Gain with 5 Volt IR DA8200BID Video Hub Module 5 - 42 MHz Return Path for DTV / CATV Rack Mountable, Part # DA8200-BID

Your price: $153.45

Linear DA-8200BID RF Distribution Amplifier 8-Way 1 GHz Signal Bi-Directional 3 dB Gain with 5 Volt IR DA8200BID Video Hub Module 5 - 42 MHz Return Path for DTV / CATV Rack Mountable, Part # DA8200-BID

Linear DA-8200BID Bi-Directional RF Distribution Amplifier with 5V IR

The Model DA-8200BID Bi-directional RF Distribution Amplifier with 5-volt IR is the heart of a multi-room distribution system with outputs to eight televisions with coax runs up to 150 feet. The Model DA-8200BID has three inputs, one from CATV and two from Channel Plus 5400, 5500, or SVM series modulators. The Model DA-8200BID can handle an extremely wide range of input signals from NTSC and digital TV. The Model DA-8200BID offers a 5-42 MHz bandwidth return path for bi-directional communication for use with digital cable interactive set-top boxes.

The Model DA-8200BID can be powered locally with its included power supply or remotely from up to 75 feet away by using an in-wall power injector wall plate Model 2010 or any 5500 series or SVM series modulator.

The Model DA-8200BID features optional IR control of connected video sources and whole house IR integration with a built-in 5-volt IR engine. Model 2133 set-top IR targets connect between the amplifier outputs and the television sets. IR emitters connected to the amplifier, or to a 5500 or SVM series IR enabled modulator connected to the amplifier, will repeat the IR remote control signals back to the video source component.

Specifications:

• 54 MHz to 1 GHz forward bandwidth
• 5 MHz to 42 MHz reverse bandwidth
• 3 dB nominal gain on TV outputs
• Maximum input level 20 dBmv
• Can be used in locations without electrical access and powered remotely with a Channel Plus modulator or the Model 2010 wall plate.
• Dimensions: 6.5" W x 1.25" H x 4.5" D

Retail Price: $229.95

Our Discounted Price: $153.45

Channel Plus 5555BID 4-Channel RF Distribution with IR Linear Starter Kit 12V 8 Room TV Distribution 12 Volt System Bi-Directional Amplifier, Video Modulator, Wall Interfaces, Dual Head IR Emitters, DC Blocking Capacitors, Part # 5555-BID

Your price: $419.99

Channel Plus 5555BID 4-Channel RF Distribution with IR Linear Starter Kit 12V 8 Room TV Distribution 12 Volt System Bi-Directional Amplifier, Video Modulator, Wall Interfaces, Dual Head IR Emitters, DC Blocking Capacitors, Part # 5555-BID

Channel Plus 5555BID Bi-Directional RF Distribution Kit with 12V IR System

The Model 5555BID Bi-Directional RF Distribution Kit with 12-volt IR System offers many of the basic components needed to assemble an eight room TV distribution system.

Kit Includes:

• (1) - Model DA-550BID: Bi-Directional RF Distribution Amplifier with 12-Volt IR
• (1) - Model 5545: 4-Channel Modulator with IR
• (3) - Model 2100A: In-Wall Interfaces
• (2) - Model 2172: Dual-Head IR Emitters
• (5) - Model 2501-10: DC Blocking Capacitors

The kit provides eight rooms of amplified bi-directional cable TV distribution from the Model DA-550BID amplifier; four injected TV channels from the Model 5545 modulator, IR control of four audio/video source components with the two Model 2172 dual-head IR emitters; three rooms of wall plate termination with IR target and emitter jacks with the Model 2100A in-wall IR interfaces (Model 2130A or Model 2132 set-top IR targets not included); and five rooms without IR control using the Model 2501 blocking capacitors.

Specifications:

• Four modulated TV channels create TV channels for cameras or other video sources
• IR remote control signals from IR targets pass back through the system coax to IR emitters
• In-wall interfaces fit Decora style wall plates for a professional looking installation
• Easily expandable with additional Linear components

Retail Price: $799.95

Our Discounted Price: $419.99

Steren 201-610 2.5 GHz 20 dB In-Line Amplifier Fixed Slope 20dB Satellite Signal Inline Booster Amp LNB Dish TV Video DSS DBS Digital Antenna Coaxial Cable Run Channel Strength, 950-2150 MHz, Part # 201-610

Your price: $4.39

Steren 201-610 2.5 GHz 20 dB In-Line Amplifier Fixed Slope 20dB Satellite Signal Inline Booster Amp LNB Dish TV Video DSS DBS Digital Antenna Coaxial Cable Run Channel Strength, 950-2150 MHz, Part # 201-610

This is a high quality fixed slope in-line signal amplifier 950-2150 MHz line booster amp with up to 20 dB gain. For long satellite cable runs. No need for separate power supply. Commercial Grade.

Retail Price: $9.95

Our Discounted Price: $4.39

PV-20DB Distribution Amplifier Sloped UHF/VHF Adjustable Signal Gain FM RF Indoor 20 dB Television Aerial Antenna 75 Ohm Audio Video Signal Booster Amp, 120 VAC, Part # PV20DB

Your price: $16.49

PV-20DB Distribution Amplifier Sloped UHF/VHF Adjustable Signal Gain FM RF Indoor 20 dB Television Aerial Antenna 75 Ohm Audio Video Signal Booster Amp, 120 VAC, Part # PV20DB

This indoor distribution amplifier is designed to work under almost any custom installation requirements. The adjustable gain on this amp allows the installer to tailor this amp to just the right amount of amplification.

Specifications:

• Frequency Range: 47 - 900 MHZ
• Max Input: VHF 40 dBmV, UHF 20 dBmV
• Gain: VHF 20 dB, UHF 21 dB
• Noise: VHF 6 dB, UHF 8 dB
• Gain Control: 10 dB
• Power Requirements: 117 VAC -60 HZ

Retail Price: $29.95

Our Discounted Price: $16.49

Channel Plus 2172 Dual Head IR Remote Emitter/Repeater Signal Infrared Remote Repeater/Emitter Micro Head 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2172

Your price: $11.35

Channel Plus 2172 Dual Head IR Remote Emitter/Repeater Signal Infrared Remote Repeater/Emitter Micro Head 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2172

Channel Plus 2172 Dual Head IR Emitter

The Model 2172 Dual-head IR Emitter connects to a video hub, 2100A and 2010 in-wall interface, or to a 5500 series IR enabled modulator connected to a video hub. The emitter will repeat the IR remote control signals received at an IR Target that were sent back through the coax cable to two video source components. Each Model 2172 IR emitter has adhesive backing to allow sticking the emitter over the IR sensor on the faceplate of the video source component.

Specifications:

• Dual-head IR emitter
• Compatible with 5-volt and 12-volt IR systems
• Five foot cord with mini plug
• Use with video hubs, in-wall interfaces, and 5500 series modulators
• 0.3" W x 0.5" H x 0.3" D

Retail Price: $19.95

Our Discounted Price: $11.35

Linear 2172 Dual IR Remote Micro Emitter/Repeater Infrared Blinker Head Remote Repeater/Emitter Micro Signal 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2172

Your price: $12.29

Linear 2172 Dual IR Remote Micro Emitter/Repeater Infrared Blinker Head Remote Repeater/Emitter Micro Signal 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2172

Linear 2172 Dual Head IR Emitter

The Model 2172 Dual-head IR Emitter connects to a video hub, 2100A and 2010 in-wall interface, or to a 5500 series IR enabled modulator connected to a video hub. The emitter will repeat the IR remote control signals received at an IR Target that were sent back through the coax cable to two video source components. Each Model 2172 IR emitter has adhesive backing to allow sticking the emitter over the IR sensor on the faceplate of the video source component.

Specifications:

• Dual-head IR emitter
• Compatible with 5-volt and 12-volt IR systems
• Five foot cord with mini plug
• Use with video hubs, in-wall interfaces, and 5500 series modulators
• 0.3" W x 0.5" H x 0.3" D

Retail Price: $19.95

Our Discounted Price: $12.29

Linear COMP-2-HDMI-AD Component Audio to HDMI Adapter COMP2HDMIAD Converts Component Audio / Video to HDMI Digital Signal by Gefen, Component and Audio Input to HDMI Signal Output, Part # COMP-2-HDMI-AD

Your price: $56.95

Linear COMP-2-HDMI-AD Component Audio to HDMI Adapter COMP2HDMIAD Converts Component Audio / Video to HDMI Digital Signal by Gefen, Component and Audio Input to HDMI Signal Output, Part # COMP-2-HDMI-AD

This item is no longer available for purchase.

Please check out the Video Distribution Section for similar products!!!

Linear COMP-2-HDMI-AD Component with Audio to HDMI

The Model COMP-2-HDMI-AD Component with Audio to HDMI Adapter is a unique device that allows older analog devices to be integrated seamlessly into the modern home theater. This adapter connects component video home Theater devices to HDMI compliant digital monitors. This adapter also takes analog L+R audio and encodes it onto the HDMI signal for the full DMI video and audio effect. With the Component with Audio to HDMI Adapter, legacy home theater devices and computer systems can be easily connected to any HDMI display for the full digital video and audio experience.

Simply connect the supplied component cable to the input side of the Component with Audio to HDMI Adapter. Connect the supplied RCA audio cables to the audio inputs of the Component with Audio to HDMI Adapter. Connect the HDMI display or projector input to the HDMI output of the Component with Audio to HDMI Adapter. The adapter generates the compatible analog to digital conversion signals for video and audio as well as encoding the audio onto the HDMI to make the connection between the analog inputs and the digital output work.

Features:

• Convert Component Video with Audio to HDMI for Digital Displays
• Allows you to connect your HDTV YPbPr source to an HDMI input
• Encodes analog audio onto the video signal for HDMI video and audio
• Supports HDTV resolution up to 1080p
• HDMI compliant
• 5 VDC Power Supply (Regulatory Approvals Include UL and CE)
• One 6 ft RCA L+R audio cable
• One 6 ft Component cable.

Specifications:

• Digital Video Amplifier Bandwidth: 165 MHz
• Video Amplifier Bandwidth: 350 MHz
• Input Video Signal: 1.2 Volts p-p
• Input DDC Signal: 5 Volts p-p (TTL)
• HDMI Connector: Type A (19 pin) female
• Video In: 3 RCA component
• Audio Connector: Analog RCA L+R
• Power Consumption: 10 Watts (max)
• Dimensions: 4” W x 1” H x 4” D

Retail Price: $199.95

Our Discounted Price: $56.95

Linear COMP-CAT5-EXT Component Audio Extender COMPCAT5EXT Single CAT5 Cable Extends Analog Component Video Audio by Gefen Digital Audio Transmitted over CAT5E CAT6 Cable Sender over CAT5 to Receiver, Part # COMP-CAT5-EXT

Your price: $115.39

Linear COMP-CAT5-EXT Component Audio Extender COMPCAT5EXT Single CAT5 Cable Extends Analog Component Video Audio by Gefen Digital Audio Transmitted over CAT5E CAT6 Cable Sender over CAT5 to Receiver, Part # COMP-CAT5-EXT

This item is no longer available for purchase.

Please check out the Video Distribution Section for similar products!!!

Linear COMP-CAT5-EXT Component with Audio Extender

The Model COMP-CAT5-EXT Component with Audio Extender (Sender and Receiver) extends your audio and video signals with Cat-5 cable. Place your source anywhere and extend the signal up to a 1000 feet away. The Component with Audio Extender will extend Analog Component as well as Analog Audio or Digital Audio (SPDIF or Optical). All audio and video signals are transmitted digitally over a single Cat-5, Cat-5e, or Cat-6 cable and both the analog and digital audio outputs are active on the receiver side.

The Component with Audio Extender sender unit connects to any component video and audio source using the supplied Component and RCA cables. The receiver unit connects to your HDTV component video display and audio input up to 1000 feet away. Only one Cat-5, Cat-5e, or Cat-6 cable is used to connect the sender to receiver for perfect video extension up to 1080p. The sender and receiver are powered by individual 5V DC power supplies.

Includes: Two 5 VDC Power Supplies (Regulatory Approvals Include UL and CE), one 6ft. Component cable, and one 2 RCA L+R audio cable.

Features:

• Extends Component video and audio up to 1000 feet (300 meters) over a single Cat-5, Cat-5e, or Cat-6 cable
• Supports HDTV resolutions up to 1080p
• Supports analog L+R audio and multichannel digital audio (SPDIF or Optical)
• No loss of quality
• Plug and play installation
• Equalization for Cat-5 signal skews
• Only one Cat-5, Cat-5e, Cat-6 cable is required
• Both analog and digital audio outputs are active on the receiver side

Specifications:

• Video Amplifier Bandwidth: 350 MHz
• Input Video Signal: 1.2 Volts p-p
• Input Sync Signal: 5 Volts p-p (TTL)
• Horizontal Frequency Range: 15-70 KHz
• Vertical Frequency Range: 30-170 Hz
• Video In/Out: 3 RCA component
• Audio In/Out: 2 RCA Audio, 1 SPDIF, 1 Optical
• Link Connector: RJ-45 Shielded
• Power Consumption: 5 Watts (max.)
• Dimensions: 3” W x 1” H x 3.75” D

Retail Price: $399.95

Our Discounted Price: $115.39

Channel Plus 5557BID 5V 2-Channel Video RF Distribution Kit Linear Starter 2-Source Modulator 8 Room TV Distribution 5 Volt IR System, Bi-Directional Amplifier, Video Modulator, Set-Top IR Targets, Dual Head IR Emitter, Part # 5557-BID

Your price: $295.99

Channel Plus 5557BID 5V 2-Channel Video RF Distribution Kit Linear Starter 2-Source Modulator 8 Room TV Distribution 5 Volt IR System, Bi-Directional Amplifier, Video Modulator, Set-Top IR Targets, Dual Head IR Emitter, Part # 5557-BID

Channel Plus 5557BID Bi-Directional RF Distribution Kit with 5V IR System

The Model 5557BID Bi-Directional RF Distribution Kit with 5-volt IR System offers many of the basic components needed to assemble an eight room TV distribution system.

Kit Includes:

• (1) - Model DA-8200BID: Bi-Directional RF Distribution Amplifier with 5-Volt IR
• (1) - Model 5525: 2-Channel Modulator with IR
• (2) - Model 2133: Set-Top IR Targets
• (1) - Model 2172: Dual-Head IR Emitter

The kit provides eight rooms of amplified bi-directional cable TV distribution from the Model DA-8200BID amplifier; two injected TV channels from the Model 5525 modulator, IR control of two audio/video source components with the Model 2172 dual-head IR emitter; two rooms of IR remote control using the Model 2133 set-top IR targets.

Specifications:

• Two modulated TV channels create TV channels for cameras or other video sources
• IR remote control signals from IR targets pass back through the system coax to IR emitters
• Easily expandable with additional Linear components

Retail Price: $349.95

Our Discounted Price: $295.99

Channel Plus 5558BID 5 Volt 4-Channel Video RF Distribution Kit Linear Starter Bi-Directional Amp CATV IR Control 8 Room TV Distribution 5V IR System, Bi-Directional Amplifier, Video Modulator, Set-Top IR Targets, Dual Head IR Emitter, Part # 5558-BID

Your price: $412.95

Channel Plus 5558BID 5 Volt 4-Channel Video RF Distribution Kit Linear Starter Bi-Directional Amp CATV IR Control 8 Room TV Distribution 5V IR System, Bi-Directional Amplifier, Video Modulator, Set-Top IR Targets, Dual Head IR Emitter, Part # 5558-BID

Channel Plus 5558BID Bi-Directional RF Distribution Kit with 5V IR System

The Model 5558BID Bi-Directional RF Distribution Kit with 5-volt IR System offers many of the basic components needed to assemble an eight room TV distribution system.

Kit Includes:

• (1) - Model DA-8200BID: Bi-Directional RF Distribution Amplifier with 5-Volt IR
• (1) - Model 5545: 4-Channel Modulator with IR
• (3) - Model 2133: Set-Top IR Targets
• (2) - Model 2172: Dual-Head IR Emitter

The kit provides eight rooms of amplified bi-directional cable TV distribution from the Model DA-8200BID amplifier; four injected TV channels from the Model 5545 modulator, IR control of four audio/video source components with the two Model 2172 dual-head IR emitters; three rooms of IR remote control using the Model 2133 set-top IR targets.

Specifications:

• Four modulated TV channels create TV channels for cameras or other video sources
• IR remote control signals from IR targets pass back through the system coax to IR emitters
• Easily expandable with additional Linear components

Retail Price: $799.95

Our Discounted Price: $412.95

Channel Plus 5558HHR 4-Channel Video RF Distribution Kit Linear Starter Modulator 5 Volt IR High-Headroom 8 Room TV Distribution 5V IR System, Distribution Amplifier, Video Modulator, Set-Top IR Targets, Dual Head IR Emitter, Part # 5558-HHR

Your price: $435.95

Channel Plus 5558HHR 4-Channel Video RF Distribution Kit Linear Starter Modulator 5 Volt IR High-Headroom 8 Room TV Distribution 5V IR System, Distribution Amplifier, Video Modulator, Set-Top IR Targets, Dual Head IR Emitter, Part # 5558-HHR

Channel Plus 5558HHR High-Headroom RF Distribution Kit with 5V IR System

The Model 5558HHR High-Headroom RF Distribution Kit with 5-volt IR System offers many of the basic components needed to assemble an eight room TV distribution system.

Kit Includes:

• (1) - Model DA-8200HHR: High-Headroom RF Distribution Amplifier with 5-Volt IR
• (1) - Model 5545: 4-Channel Modulator with IR
• (3) - Model 2133: Set-Top IR Targets
• (2) - Model 2172: Dual-Head IR Emitter

The kit provides eight rooms of amplified off-air antenna or one-way cable TV distribution from the Model DA-8200HHR amplifier; four injected TV channels from the Model 5545 modulator, IR control of four audio/video source components with the two Model 2172 dual-head IR emitters; three rooms of IR remote control using the Model 2133 set-top IR targets.

Specifications:

• Four modulated TV channels create TV channels for cameras or other video sources
• IR remote control signals from IR targets pass back through the system coax to IR emitters
• Easily expandable with additional Linear components

Retail Price: $809.95

Our Discounted Price: $435.95

Channel Plus 5557HHR 5 Volt All-In Two Video RF Distribution Kit Linear Starter High-Headroom 2 Channel Modulator 8 Room TV Distribution 5V IR System, Distribution Amplifier, Video Modulator, Set-Top IR Targets, Dual Head IR Emitter, Part # 5557-HHR

Your price: $295.99

Channel Plus 5557HHR 5 Volt All-In Two Video RF Distribution Kit Linear Starter High-Headroom 2 Channel Modulator 8 Room TV Distribution 5V IR System, Distribution Amplifier, Video Modulator, Set-Top IR Targets, Dual Head IR Emitter, Part # 5557-HHR

Channel Plus 5557HHR High-Headroom RF Distribution Kit with 5V IR System

The Model 5557HHR High-Headroom RF Distribution Kit with 5-volt IR System offers many of the basic components needed to assemble an eight room TV distribution system.

Kit Includes:

• (1) - Model DA-8200HHR: High-Headroom RF Distribution Amplifier with 5-Volt IR
• (1) - Model 5525: 2-Channel Modulator with IR
• (2) - Model 2133: Set-Top IR Targets
• (1) - Model 2172: Dual-Head IR Emitter

The kit provides eight rooms of amplified off-air antenna or one-way cable TV distribution from the Model DA-8200HHR amplifier; two injected TV channels from the Model 5525 modulator, IR control of two audio/video source components with the Model 2172 dual-head IR emitter; two rooms of IR remote control using the Model 2133 set-top IR targets.

Specifications:

• Two modulated TV channels create TV channels for cameras or other video sources
• IR remote control signals from IR targets pass back through the system coax to IR emitters
• Easily expandable with additional Linear components

Retail Price: $549.95

Our Discounted Price: $295.99

Channel Plus 5555HHR HDTV 4-Way RF Distribution System 12 Volt Starter Kit IR 4 Channel High-Headroom Modulator 8 Room Distribution 12V IR Amplifier, Video Modulator In-Wall Interfaces Dual Head IR Emitters, DC Blocking Capacitors, Part # 5555-HHR

Your price: $435.95

Channel Plus 5555HHR HDTV 4-Way RF Distribution System 12 Volt Starter Kit IR 4 Channel High-Headroom Modulator 8 Room Distribution 12V IR Amplifier, Video Modulator In-Wall Interfaces Dual Head IR Emitters, DC Blocking Capacitors, Part # 5555-HHR

Channel Plus 5555HHR High-Headroom RF Distribution Kit with 12V IR System

The Model 5555HHR High-Headroom RF Distribution Kit with 12-volt IR System offers many of the basic components needed to assemble an eight room TV distribution system.

Kit Includes:

• (1) - Model DA-550HHR: High-Headroom RF Distribution Amplifier with 12-Volt IR
• (1) - Model 5545: 4-Channel Modulator with IR
• (3) - Model 2100A: In-Wall Interfaces
• (2) - Model 2172: Dual-Head IR Emitters
• (5) - Model 2501-10: DC Blocking Capacitors

The kit provides eight rooms of amplified off-air antenna or one-way cable TV distribution from the Model DA-550HHR amplifier; four injected TV channels from the Model 5545 modulator, IR control of four audio/video source components with the two Model 2172 dual-head IR emitters; three rooms of wall plate termination with IR target and emitter jacks with the Model 2100A in-wall IR interfaces (Model 2130A or Model 2132 set-top IR targets not included); and five rooms without IR control using the Model 2501 blocking capacitors.

Specifications:

• Four modulated TV channels create TV channels for cameras or other video sources
• IR remote control signals from IR targets pass back through the system coax to IR emitters
• In-wall interfaces fit Decora style wall plates for a professional looking installation
• Easily expandable with additional Linear components

Retail Price: $609.95

Our Discounted Price: $435.95

Pico Macom TA-36 UHF/VHF/FM Distribution Amplifier 36 dB UHF Tru-Spec 31 dB VHF Dual Adjustable Signal Gain with 2 Switchable FM Trap Post Distribution Booster Amplifier High Output Antenna Aerial, Part # TA36

Your price: $79.95

Pico Macom TA-36 UHF/VHF/FM Distribution Amplifier 36 dB UHF Tru-Spec 31 dB VHF Dual Adjustable Signal Gain with 2 Switchable FM Trap Post Distribution Booster Amplifier High Output Antenna Aerial, Part # TA36

Pico Macom TA-36 UHF/VHF/FM Distribution Amplifier!!!

This low cost amplifier is designed to amplify VHF/UHF/FM signals in residential applications. It features a built-in FM trap.

Features:

• 2 Switchable FM Traps
• Separate Gain Controls
• Low Noise
• -20 dB Monitor Output
• Excellent for Medium Size MATV Applications
• 50 dB Output Capacity

Specifications:

• Bandwidth:
  • VHF Low Band: 54 - 108 MHz
  • VHF High Band: 174 - 216 MHz
  • UHF Band: 470 - 812 MHz
• FM Traps: -20 dB @ 88 - 96 MHz, -20 dB @ 95 - 108 MHz
• Gain:
  • VHF 31 dB
  • UHF 36 dB
• Gain Control Range: 15 dB
• Noise Figure:
  • VHF 6 dB
  • UHF 7 dB
• Channels:
  • 7 Channels VHF:
    • Max Input: 20 dBmV
    • Max Output: 52 dBmV
  • 4 Channels UHF:
    • Max Input: 20 dBmV
    • Max Output: 56 dBmV
  • 12 Channels VHF:
    • Max Input: 11 dBmV
    • Max Output: 43 dBmV
  • 7 Channels UHF:
    • Max Input: 11 dBmV
    • Max Output: 45 dBmV
• Power Requirements: 117 VAC, 60 Hz, 9.5 W
• Please Note: May substitute based on product availability.

Retail Price: $109.95

Our Discounted Price: $79.95

Pico Macom Tru Spec 25 dB UHF/VHF/FM Amp TA-25 Signal Booster Distribution Amplifier with Switchable FM Trap High Output Antenna Aerial Single Output Audio Video Broad Band, Part # TA25

Your price: $17.95

Pico Macom Tru Spec 25 dB UHF/VHF/FM Amp TA-25 Signal Booster Distribution Amplifier with Switchable FM Trap High Output Antenna Aerial Single Output Audio Video Broad Band, Part # TA25

Pico Macom DISTAMP-25-GX 25-DB VHF/UHF/FM 1-OUTPUT, Video Distribution FM Trap Signal amplifier for antenna and broad band. The DISTAMP-25-GX is a full spectrum, high output amplifier for small CATV or low distortion applications where performance and reliability are required.

Specifications:

• 25 dB High Output UHF / VHF / FM Distribution Amplifier
• Single Output
• Low Noise:
  • VHF: 6 dB
  • UHF: 7 dB
• Bandwidth: 54 - 860 MHz
• FM Trap: -25 dB @ 95 - 108 MHz
• Commercial Grade

Retail Price: $29.95

Our Discounted Price: $17.95

Open House 2171 Single-Head IR Signal Emitter/Repeater Infrared Remote Repeater/Emitter Micro Head 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2171

Your price: $9.79

Open House 2171 Single-Head IR Signal Emitter/Repeater Infrared Remote Repeater/Emitter Micro Head 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2171

Open House 2171 Single Head IR Emitter

The Model 2171 Single-head IR Emitter connects to a video hub, 2100A and 2010 in-wall interface, or to a 5500 series IR enabled modulator connected to a video hub. The emitter will repeat the IR remote control signals received at an IR Target that were sent back through the coax cable to the video source component. The Model 2171 IR emitter has adhesive backing to allow sticking the emitter over the IR sensor on the faceplate of the video source component.

Specifications:

• Single-Head IR Emitter
• Compatible with 5 Volt and 12 Volt IR Systems
• 5' Foot Cord with Mini Plug
• For Use With:
  • Video Hubs
  • In-Wall Interfaces
  • 5500 Series Modulators
• 0.3" W x 0.5" H x 0.3" D

Retail Price: $19.95

Our Discounted Price: $9.79

1 x 7 Composite Video Audio Distribution Amplifier 1 Input 7 Output AV700 CT-700 CableTronix HDTV Signal Source 1 In 7 Out with Left Right Baseband Audio 1x7 Output with Power Supply, 1 Input / 7 Output, Part # CT700

Your price: $66.49

1 x 7 Composite Video Audio Distribution Amplifier 1 Input 7 Output AV700 CT-700 CableTronix HDTV Signal Source 1 In 7 Out with Left Right Baseband Audio 1x7 Output with Power Supply, 1 Input / 7 Output, Part # CT700

1 x 7 Composite Video / Audio Signal Distribution Amplifier!!!

The CT-700 is designed to distribute a single audio/video source to up to seven destinations. A composite video source with left and right baseband audio can be split to seven separate locations with no loss of signal quality. The unit has been designed with all RCA connections for ease of use. Units can be daisy chained to supply more than seven outputs. Compact design and affordable pricing make the CT-700 a perfect item to keep on hand in every installation vehicle. The CT-700 is perfect for splitting the composite output of a DVD player, VCR, satellite receiver or DVR to up to seven destinations including display monitors, DVRs, televisions and VCRs.

Product Specifications:

• One set of RCA Composite Video and Audio Inputs.
• Seven sets of RCA Composite Video and Audio Outputs.
• Ideal for Composite Signal Sources.
• Maintains original A/V signal strength for distribution.

Video Specifications:

• Nominal Input Level: 1 Volt P-P
• Gain: 2 Volt Unterminated, 1 Volt Terminated
• Input Impedance: 75 Ohm +/- 5%
• Output Impedance: 75 Ohm +/- 5%
• Isolation Out to In: 60 dB
• Return Loss: 18 dB
• Video Bandwidth: 100 MHz
• Input/Output Jacks: RCA Type Phone Jacks

Audio Specifications:

• Nominal Input Level: 1 Volt P-P
• Gain: Unity (One to One)
• Input Impedance: 22 K Ohm
• Output Impedance: 1 K Ohm
• THD: 0.05%
• Frequency Response: 20 Hz to 100 kHz
• Channel Separation: > 75 dB
• Port to Port Isolation: 60 dB
• Out to In Isolation: 60 dB
• Signal to Noise: 100 dB @ 2 Volts (out)
• Input/Output Jacks: RCA Type Phono Jacks

Power Specifications:

• 9 Volts DC @ 600 mA with 2.1 mm Power Jack

Retail Price: $99.95

Our Discounted Price: $66.49

Channel Plus SVC-10R S-Video Digital Distribution Receiver Converts Signal from CAT 5 to Composite and S-Video Outputs S-Video CAT5 Distribution System with 12 Volt IR, Part # SVC10R | Open Box Item

Your price: $64.95

Channel Plus SVC-10R S-Video Digital Distribution Receiver Converts Signal from CAT 5 to Composite and S-Video Outputs S-Video CAT5 Distribution System with 12 Volt IR, Part # SVC10R | Open Box Item

Channel Plus SVC-10R CAT-5 S-Video Receiver with 12V IR

The Model SVC-10R S-Video Cat-5 Receiver with 12-volt IR works with the Model SVC-10 S-video Cat-5 Distribution System to deliver true, unconverted S-video or composite video, digital audio or analog audio over Cat-5 up to 1,000 feet away. Simply place the SVC-10 transmitter at the source and the SVC-10R receiver (included with the SVC-10 transmitter and sold separately) at a remote location. The integrated IR makes it possible to control the source with a click of the remote (IR targets and emitters sold separately).

Specifications:

• Composite & S-video outputs
• Coax digital & analog audio outputs
• 12-volt IR target input
• RJ-45 Cat-5 input
• Compact size: 4.6" W x 1.0" H x 3.2" D
• Open Box Item

Retail Price: $99.95 (New Retail Price)

Our Discounted Price: $64.95 (Open Box Item)

Steren 200-700 4-Way Broadband Amplifier UHF/VHF/FM RF 10 dB RF 4-Out Put Way Signal Port Booster Distribution Amplifier UL Listed Four Output 75 Ohm F Connection Television Antenna Aerial, Part # 200700

Your price: $9.95

Steren 200-700 4-Way Broadband Amplifier UHF/VHF/FM RF 10 dB RF 4-Out Put Way Signal Port Booster Distribution Amplifier UL Listed Four Output 75 Ohm F Connection Television Antenna Aerial, Part # 200700

DISTRIBUTION AMP, 10-DB UHF/VHF/FM, 4-OUTS, 47-900 MHz. 4 way amplifier broad band VHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. Eliminates the need for a four way splitter during installation. 10 decibel signal amplifier, 4 outputs. Designed to extend the system line where additional TV sets, VCR's etc, are required without loss of reception quality.

Specifications:

• TV/Video Frequency Response
• Easy Installation
• Low Noise Figure
• For Indoor Use Only

Retail Price: $19.95

Our Discounted Price: $9.95

Vanco 20 dB Television Amplifier Signal Distribution Digital 2-Output Terrestrial Signal 24 dB VHF/UHF/FM Dual Booster Amp TV Aerial Antenna Broad Band Amp, 2 Way Audio Video

Your price: $9.95

Vanco 20 dB Television Amplifier Signal Distribution Digital 2-Output Terrestrial Signal 24 dB VHF/UHF/FM Dual Booster Amp TV Aerial Antenna Broad Band Amp, 2 Way Audio Video

2 way amplifier broad band VHF/UHF/FM, Boosts signal strength needed to power multiple TV sets and VCR installations. Recommended for long cable runs. This item may be substituted upon order fulfillment.

Retail Price: $19.95

Our Discounted Price: $9.95

Linear HDMI-SB HDMI Super Booster HDMI-SB-HDMI Cable Digital HD Signal Sender over HDMI Receiver Extends HD Displays Up to 200' FT from 1080P Source, Part # HDMI-SB

Your price: $59.49

Linear HDMI-SB HDMI Super Booster HDMI-SB-HDMI Cable Digital HD Signal Sender over HDMI Receiver Extends HD Displays Up to 200' FT from 1080P Source, Part # HDMI-SB

Linear HDMI-SB: Super Booster for HDMI Cables

The Model HDMI-SB Super Booster for HDMI Cables is an attractive alternative to the traditional sender/receiver solutions for HD extension. The Super Booster for HDMI enables your standard ”off the shelf” certified HDMI cable to transmit HDTV video plus multichannel digital audio in a single cable way beyond the limited HDMI specification of 15-feet.

Up to 200 feet can be easily traversed using your certified HDMI cable plus a Super Booster for HDMI. The Super Booster for HDMI corrects any digital degradation that occurs when HDMI is used to send digital audio/video signals beyond the HDMI specification of 15 feet.

This plug and play installation takes mere seconds. You simply connect the certified HDMI cable on one side of the Super Booster for HDMI and the display’s cable on the other side. The Super Booster for HDMI sits between the end of your certified HDMI cable and your display. You also have the option of connecting another certified HDMI cable to the Booster, daisy chaining Boosters and cables for greater distances.

Features:

• Perfect digital high definition video sent over long stretches of certified HDMI cables
• Locate an HDMI display up to 200 feet away from any HDTV source
• Supports resolutions up to 1080p, 2K, and 1920 x 1200
• HDMI / HDCP compliant

Specifications:

• Video Amplifier Bandwidth: 165 MHz
• Input Video Signal: 1.2 Volts p-p
• Input DDC Signal: 5 Volts p-p (TTL)
• Single Link Range: 1080p/1920 x 1200
• HDMI Connector: Type A 19 pin female
• Source requires 50mA output for maximum performance
• Dimensions: 1.625” W x 0.75” H x 1.75” D

Retail Price: $199.95

Our Discounted Price: $59.49

Channel Plus SVD-8 Distribution Panel with Differential Drive Engine Linear CAT-5 Digital Input and 8 CAT5 Output Distribution Receiver CAT5 Distribution System with 3 IR Emitter Outputs, Part # SVD8

Your price: $208.39

Channel Plus SVD-8 Distribution Panel with Differential Drive Engine Linear CAT-5 Digital Input and 8 CAT5 Output Distribution Receiver CAT5 Distribution System with 3 IR Emitter Outputs, Part # SVD8

Channel Plus SVD-8 Distribution Panel with Differential Drive

The Model SVD-8 Distribution Panel with Differential Drive is a companion product to the SVC-10 S-video Cat-5 Distribution System. Adding an SVD-8 to the system expands the distribution capabilities from 1 to 8 locations with IR capabilities at each location. It also doubles the distance signals can be distributed to 2000 feet using Cat-5 wire. Both the SVC-10 and the SVD-8 distribute true, unconverted s-video, composite video, digital audio or analog audio. By cascading multiple SVD-8 units, the system is expandable to 64 outputs.

Suggested Uses:

• The SVD-8 is perfect when you need to send a single source to multiple locations over a long distance (up to 2000 ft).
• Combine SVC-10 and SVD-8 to distribute multiple sources over long distance such as schools, training facilities, sports bars, video stores or light commercial applications.

Specifications:

• Cat-5 input
• Eight Cat-5 outputs
• Three IR emitter outputs (two mini-jacks, one two-position terminal block)
• Power and IR indicators
• Cable length adjustment control for each output
• Slide-in labeling system (pre-printed labels provided)

Retail Price: $399.95

Our Discounted Price: $208.39

Channel Plus 2173 Linear 5 or 12 VDC Repeater IR Emitter Single Head Signal Infrared Remote Repeater/Emitter Micro Head 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2173

Your price: $8.95

Channel Plus 2173 Linear 5 or 12 VDC Repeater IR Emitter Single Head Signal Infrared Remote Repeater/Emitter Micro Head 5 Volt and 12 Volt Compatible Video Distribution Amplifier Systems, Part # CP2173

This item is no longer available for purchase.

It has been replaced by the Channel Plus 2171!!!!

Channel Plus 2173 Single Head IR Emitter

INFRARED EMITTERS/IR emitters are both 5 and 12 volt compatible. Use the IR emitters over the IR sensors on video products like VCRs, DVDs and music systems to control their functions with IR commands. The Emitters are used with other 2100 series products for whole-house IR control.

Specifications:

• Single Solid Head IR Repeater / Emitter
• Compatible with 5 Volt and 12 Volt IR Systems
• 5' Foot Cord with Mini Plug
• For Use With:
  • Video Hubs
  • In-Wall Interfaces
  • 2100 Series Products

Retail Price: $19.95

Our Discounted Price: $8.95

PCT PCTMA28P 8-Way Pass Return Drop Amplifier with Power Inserter and Cable Signal Distribution Amplifier TV RF Output Booster Amp Multimedia 8 Port Drop Bi Directional Digital Multi-Media 5-42 / 54-1002 MHz Passive Return, Part # PCT MA2-8P

Your price: $34.95

PCT PCTMA28P 8-Way Pass Return Drop Amplifier with Power Inserter and Cable Signal Distribution Amplifier TV RF Output Booster Amp Multimedia 8 Port Drop Bi Directional Digital Multi-Media 5-42 / 54-1002 MHz Passive Return, Part # PCT MA2-8P

8 Port Multimedia Drop Signal Amplifier by PCT!!!

PCT's new miniature MA2 drop amplifier series features improved performance and ultra-low noise amplification of broadband signals for subscriber drop installations. The MA2 series provides better return loss performance, enhanced shielding protection, and IEEE B3 6kV, 3000 amp combination wave surge withstand on all ports for superior lighting protection. All "F" ports also include PCT's patented Digital Seizure Mechanism (DSM) for superior center conductor retention, electrical performance, and additional protection against transient surges.

Features:

• Minimal Signal Degradation
• Superior Seizure Technology
• Lightweight Powder Coated / Weather Sealed Corrosion Protected Housing
• 6kV, 3kA Combination  Wave (B3) Surge on all "F" Ports
• DSM Seizure Technology Provides Better Performance than 360 Degree Contacts
• "PWR IN" F-Port with Power Adapter
• Blocking Capacitors Standard on all Ports
• LED Power Indicator Light
• Operating Temperature: -40 F to +140 F
• Includes: 3' FT Power Cable
• Includes: Power Inserter
• Includes: AC/DC Power Transformer
  • Input: 120 VAC 60 Hz 100 mA
  • Output: 15 VDC 250 mA

Forward Path Specifications:

• Forward Path Frequency Range: 54 - 1,000 MHz
• Typical Gain (Per Output Port): 3.3 dB
• Rated Output Level (dBmV), Channels Flat: 13.3 @ 80
• Output Port-to-Port Isolation: 15 - 42 MHz: 30 dB
• Output Port-to-Port Isolation: 54 - 1000 MHz: 25 dB
• RF Amplification Device IC - GaAS HBT
• Passband Response: +- 0.5 dB
• Noise Figure @ 70 F: 3.6 dB
• Return Loss, All Ports: 20dB (Min.)
• Composite Second Order Distortions: < -62 dBc
• Composite Triple Beat Distortions: < -75 dBc
• Cross Modulation Distortions: < -75 dBc
• Hum Modulation: < -75 dBc
• Group Delay (ns) @ 54 - 60 MHz: < 20/3.58 MHz
• Group Delay (ns) @ 60 - 1000 MHz: < 5/3.58 MHz
• Shielding Effectiveness (RFI): >110 dB
• Nominal Impedance: 75 Ohm

Passive Return Path Specifications:

• Return Path Frequency Range: 5 - 42 MHz
• Passive Return Insertion Loss: -11.7 dB
• Passband Response: +- 0.5 dB
• Return Loss: 20dB (Min.)
• Group Delay (ns) @ 5 - 6.5 MHz: < 20/1 MHz
• Group Delay (ns) @ 6.5 - 40 MHz: < 5/1 MHz
• Group Delay (ns) @ 40 - 42 MHz: < 20/1 MHz
• HUM Modulation: < -75 dBc
• Nominal Impedance: 75 Ohm

Retail Price: $74.95

Our Discounted Price: $34.95

Digiwave DGS-CA101 Audio Video Distribution Amplifier 4 Way RCA Stereo Port HDTV 1 In 4 Out Composite A/V Plug Connection 1x4 with Power Supply, 1 Input and 4 Output, Multi-Monitor Viewing, Part # DGSCA101

Your price: $21.95

Digiwave DGS-CA101 Audio Video Distribution Amplifier 4 Way RCA Stereo Port HDTV 1 In 4 Out Composite A/V Plug Connection 1x4 with Power Supply, 1 Input and 4 Output, Multi-Monitor Viewing, Part # DGSCA101

Audio Video Signal Distribution Amplifier!!!

Easily split one way audio/video signal into four way audio/video signal. Splits video and stereo audio output signals from VCR and other video source to as many as four other VCRs or monitors without signal loss. Reliable and convenient to connect.

Specifications:

• 4 Video Outputs
• 1 Video Input
• Input Voltage: 120V AC 60Hz
• Output Voltage: 15V DC 150mA
• Class 2 Power Unit
• AC/DC Adapter Included

Retail Price: $49.95

Our Discounted Price: $21.95

Linear 5555HHR HDTV 4-Way RF Distribution System 12 Volt Starter Kit IR 4 Channel High-Headroom Modulator 8 Room Distribution 12V IR Amplifier, Video Modulator In-Wall Interfaces Dual Head IR Emitters, DC Blocking Capacitors, Part # 5555-HHR

Your price: $435.95

Linear 5555HHR HDTV 4-Way RF Distribution System 12 Volt Starter Kit IR 4 Channel High-Headroom Modulator 8 Room Distribution 12V IR Amplifier, Video Modulator In-Wall Interfaces Dual Head IR Emitters, DC Blocking Capacitors, Part # 5555-HHR

Linear 5555HHR High-Headroom RF Distribution Kit with 12V IR System

The Model 5555HHR High-Headroom RF Distribution Kit with 12-volt IR System offers many of the basic components needed to assemble an eight room TV distribution system.

Kit Includes:

• (1) - Model DA-550HHR: High-Headroom RF Distribution Amplifier with 12-Volt IR
• (1) - Model 5545: 4-Channel Modulator with IR
• (3) - Model 2100A: In-Wall Interfaces
• (2) - Model 2172: Dual-Head IR Emitters
• (5) - Model 2501-10: DC Blocking Capacitors

The kit provides eight rooms of amplified off-air antenna or one-way cable TV distribution from the Model DA-550HHR amplifier; four injected TV channels from the Model 5545 modulator, IR control of four audio/video source components with the two Model 2172 dual-head IR emitters; three rooms of wall plate termination with IR target and emitter jacks with the Model 2100A in-wall IR interfaces (Model 2130A or Model 2132 set-top IR targets not included); and five rooms without IR control using the Model 2501 blocking capacitors.

Specifications:

• Four modulated TV channels create TV channels for cameras or other video sources
• IR remote control signals from IR targets pass back through the system coax to IR emitters
• In-wall interfaces fit Decora style wall plates for a professional looking installation
• Easily expandable with additional Linear components

Retail Price: $609.95

Our Discounted Price: $435.95

Open House 2184 1 x 4 IR Repeater Emitter Expansion Breakout Block 12 Volt for Compatible Video Distribution Amplifier Systems, 4 Position Expansion Terminal Block, Part # CP2184

Your price: $24.75

Open House 2184 1 x 4 IR Repeater Emitter Expansion Breakout Block 12 Volt for Compatible Video Distribution Amplifier Systems, 4 Position Expansion Terminal Block, Part # CP2184

Open House 2184 IR Breakout Block

The Model 2184 IR Breakout Block allows local IR access on DA-550 and DA-8200 distribution amplifiers. The distribution amplifiers have a three-pin power connector. One of the connector's pins supplies the IR remote control signals received from IR targets connected to the amplifier. Attach the Model 2184 to the amplifier's power connector and up to four IR emitters may be connected directly to the Model 2184. To power the amplifier, the power supply transformer connects to the power jack on the Model 2184.

A four-position expansion terminal block on the Model 2184 provides termination for additional connections to DC power and IR emitter signals.

Specifications:

• Connects directly to DA-550 or DA-8200 distribution amplifiers
• Allows for local IR in enclosure
• Four emitter jacks
• One power jack
• One four-position expansion terminal block
• 1.3" W x 3.0" H x 0.8" D

Retail Price: $39.95

Our Discounted Price: $24.75