Stainless Steel Phone Jack Wall Mount Plate Modular RJ11 RJ-11 6P4C Telephone Line Cord Mount Cover with Push-On Plug Connections and Insertion Tool, Part # Leviton C0256, C-0256

Your price: $3.49

Stainless Steel Phone Jack Wall Mount Plate Modular RJ11 RJ-11 6P4C Telephone Line Cord Mount Cover with Push-On Plug Connections and Insertion Tool, Part # Leviton C0256, C-0256

Stainless steel cover with quick-connect, push-style connections and insertion tool. Fits all standard modular wall phones.

Installation:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Our Discounted Price: $3.49

Woods Phone Wall Plate Ivory 10 Pack Modular 4 Wire Conductor Standard Face Flush Mount Modular Data Line Audio Signal Telephone Jack Outlet Plug Cover, Contractor Pack

Your price: $2.95

Woods Phone Wall Plate Ivory 10 Pack Modular 4 Wire Conductor Standard Face Flush Mount Modular Data Line Audio Signal Telephone Jack Outlet Plug Cover, Contractor Pack

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flat head screwdriver, wire cutters.

Installation Instructions:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Remove existing wall plate.
• Clean cut line cord from wall box.
• Loosen terminal screws on jack. Attach wire leads by color to corresponding pre-wired terminals screws.
• Tighten screws, making sure wire leads are not in contact with each other.
• Install jack and plate into wall box with screws provided.
• Replace handset on disconnected phone.

Retail Price: $5.95

Our Discounted Price: $2.95

Phone Wall Mount Plate Jack RJ12 RJ-12 Modular White 6P6C Conductor Surface Audio Data Line Signal Hanger Bracket, Part # Leviton C2663-W, C2663W

Your price: $0.79

Phone Wall Mount Plate Jack RJ12 RJ-12 Modular White 6P6C Conductor Surface Audio Data Line Signal Hanger Bracket, Part # Leviton C2663-W, C2663W

Surface Mount jack and cover for wall phones. Fits all standard modular wall phones. Replaces or adds a surface mount, 6-wire wall phone jack. For use with up to 2 phone lines. Tools required: flathead screwdriver and wire cutters.

Instructions:

1. Remove existing wall jack.
2. Remove cover plate.
3. Pull line cord through to front of terminal plate.
4. Fasten jack to wall box through diagonal openings in jack.
5. Remove outer jacket from line cord.
6. Connect colored wire leads to terminals matching colors.
7. Replace cover plate.
8. Mount phone on mounting screws.
9. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.79

Phone Jack Wall Plate White 6P6C RJ12 RJ-12 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal, Part # Leviton C2675-W, C2675W

Your price: $0.79

Phone Jack Wall Plate White 6P6C RJ12 RJ-12 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal, Part # Leviton C2675-W, C2675W

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flathead screwdriver, wire cutters.

Instructions:

1. Remove existing wall plate.
2. Clean cut line cord from wall box.
3. Remove 1-1/2" of outer jacket and 1/2" of insulation from colored wire leads.
4. Loosen terminal screws on jack.
5. Tighten screws.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $3.95

Our Discounted Price: $0.79

Dual Phone Jack Wall Plate Decora White 6P6C Conductor Duplex Modular RJ12 Leviton Snap-In Data Signal Dual Line Jack With Insertion Tool, Part # 41666-W

Your price: $1.49

Dual Phone Jack Wall Plate Decora White 6P6C Conductor Duplex Modular RJ12 Leviton Snap-In Data Signal Dual Line Jack With Insertion Tool, Part # 41666-W

This sectional wall plate is no longer available for purchase.

Similar products can be found in the Telephone Jack Wall Plate Section !!!

This duplex jack brings the designer styling of Leviton Decora electrical switches and outlets to telecommunications outlets. It is compatible with all standard Decora wall plates and Decora Plus snap-on wall plates with hidden mounting screws. The Decora Plus fits standard NEMA wall boxes. Wall plate mounting nuts (in platform) are composed of sturdy steel to prevent stripping and ensure secure mounting of the wall plate.

Retail Price: $5.95

Our Discounted Price: $1.49

Modular Phone Jack Wall Plate Ivory 6P4C Conductor 5 Pack RJ11 RJ-11 Wire Leviton C0249-I Flush Mount Audio Signal Telephone Line Plug Jack, Part # C0249I

Your price: $3.95

Modular Phone Jack Wall Plate Ivory 6P4C Conductor 5 Pack RJ11 RJ-11 Wire Leviton C0249-I Flush Mount Audio Signal Telephone Line Plug Jack, Part # C0249I

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flat head screwdriver, wire cutters.

Installation instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate.
3. Clean cut line cord from wall box.
4. Loosen terminal screws on jack. Attach wire leads by color to corresponding pre-wired terminals screws.
5. Tighten screws, making sure wire leads are not in contact with each other.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $6.95

Our Discounted Price: $3.95

Modular Phone Jack Wall Plate White 6P4C Conductor 5 Pack RJ11 RJ-11 Wire Leviton C0249-W Flush Mount Audio Signal Telephone Line Plug Jack, Part # C0249W

Your price: $3.89

Modular Phone Jack Wall Plate White 6P4C Conductor 5 Pack RJ11 RJ-11 Wire Leviton C0249-W Flush Mount Audio Signal Telephone Line Plug Jack, Part # C0249W

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flat head screwdriver, wire cutters.

Installation Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate.
3. Clean cut line cord from wall box.
4. Loosen terminal screws on jack. Attach wire leads by color to corresponding pre-wired terminals screws.
5. Tighten screws, making sure wire leads are not in contact with each other.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $6.95

Our Discounted Price: $3.89

Steren 300-094IV Modular Phone Jack Wall Plate Ivory Mount for Hanging Telephone 1 Single Bracket, Data Signal Plug Jack Flush, Part # 300094-IV

Your price: $0.69

Steren 300-094IV Modular Phone Jack Wall Plate Ivory Mount for Hanging Telephone 1 Single Bracket, Data Signal  Plug Jack Flush, Part # 300094-IV

Flush mount jack and cover for wall phones. Fits all standard modular phones. Replaces or adds a flush mount, modular wall phone jack.

Installation:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Our Discounted Price: $0.69

Steren 300-214IV 4-Conductor Flush Wall Plate Ivory UL 6P4C RJ11 Face Plate Dual 2-Port Telephone Wall Plate RJ-11 Jack Modular 4 Conductor Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # 300214-IV

Your price: $0.78

Steren 300-214IV 4-Conductor Flush Wall Plate Ivory UL 6P4C RJ11 Face Plate Dual 2-Port Telephone Wall Plate RJ-11 Jack Modular 4 Conductor Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # 300214-IV

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $2.95

Our Discounted Price: $0.78

Steren 301-214WH Dual 2 Port 4C UL Flush Wall Plate White RJ11 6P4C Wall Phone Plate Modular RJ-11 4 Conductor White Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # 301214-WH

Your price: $0.79

Steren 301-214WH Dual 2 Port 4C UL Flush Wall Plate White RJ11 6P4C Wall Phone Plate Modular RJ-11 4 Conductor White Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # 301214-WH

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $1.49

Our Discounted Price: $0.79

Phone Jack Wall Plate Modular White Surface Mount Leviton C0253-W 4 Wire Flush Telephone Line Plug Cover Wall Connect Hanger, Part # C0253W

Your price: $0.69

Phone Jack Wall Plate Modular White Surface Mount Leviton C0253-W 4 Wire Flush Telephone Line Plug Cover Wall Connect Hanger, Part # C0253W

Flush mount jack and cover for wall phones. Fits all standard modular phones. Replaces or adds a flush mount, modular wall phone jack.

Installation Instructions:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Our Discounted Price: $0.69

Steren 300-013IV Dual Phone Wall Jack Plate Decora Ivory RJ11 Modular 6P4C Duplex Telephone Flush Mount Line Cord Audio Data Signal 2 Outlet, Part # 300013-IV

Your price: $0.79

Steren 300-013IV Dual Phone Wall Jack Plate Decora Ivory RJ11 Modular 6P4C Duplex Telephone Flush Mount Line Cord Audio Data Signal 2 Outlet, Part # 300013-IV

This item is no longer available for purchase.

Similar products can be found in the Telephone Jack Wall Plate Section !!!

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single Line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.79

Phone Jack Wall Mount Plate 6P4C 4 Conductor Ivory Modular RJ11 RJ-11 4 Wire Surface Flush Line Plug Cover Telephone Connect Hanger, Single Pack, Part # Leviton C0253-I

Your price: $0.79

Phone Jack Wall Mount Plate 6P4C 4 Conductor Ivory Modular RJ11 RJ-11 4 Wire Surface Flush Line Plug Cover Telephone Connect Hanger, Single Pack, Part # Leviton C0253-I

Flush mount jack and cover for wall phones. Fits all standard modular phones. Replaces or adds a flush mount, modular wall phone jack.

Installation:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Our Discounted Price: $0.79

Steren 300-204IV Face Plate Wall Plate Ivory RJ-11 Modular Telephone 4-Conductor 6P4C Smooth Finish RJ11 Wire Flush Mount Audio Signal Telephone Line Plug Jack, Part # 300204-IV

Your price: $0.52

Steren 300-204IV Face Plate Wall Plate Ivory RJ-11 Modular Telephone 4-Conductor 6P4C Smooth Finish RJ11 Wire Flush Mount Audio Signal Telephone Line Plug Jack, Part # 300204-IV

Steren wall phone plate, Ivory. For new installation of flush mounted modular jack or replacement of previous phone jack. Includes jack, plate, and mounting hardware. To install wall- mount phone fit standard outlet box.

Retail Price: $1.49

Our Discounted Price: $0.52

Phone Wall Plate Jack Ivory 6P6C Conductor Modular RJ12 RJ-12 Outlet Gold Wire Flush Mount 2 Line Audio Data Signal Plug Cover, Part # RCA TP6247, TP-6247

Your price: $0.79

Phone Wall Plate Jack Ivory 6P6C Conductor Modular RJ12 RJ-12 Outlet Gold Wire Flush Mount 2 Line Audio Data Signal Plug Cover, Part # RCA TP6247, TP-6247

RCA Gold Series 6 conductor modular wall outlet, Ivory. For new installation of flush mounted modular jack or replacement of previous phone jack. Includes jack, plate, and mounting hardware. For the better connection on 2-line phone systems.

Retail Price: $1.95

Our Discounted Price: $0.79

Dual Phone Jack Wall Plate Ivory 6 Wire Conductor RJ12 RCA 2 Outlet Flush Mount Modular RJ-12 Telephone Data Line Audio Signal Double Plug Cover

Your price: $0.89

Dual Phone Jack Wall Plate Ivory 6 Wire Conductor RJ12 RCA 2 Outlet Flush Mount Modular RJ-12 Telephone Data Line Audio Signal Double Plug Cover

For connecting two modular phones to one wall jack. Attach spade lugs from existing line cord to corresponding color terminals. Then replace the face plate and plug in to phone.

Retail Price: $1.95

Our Discounted Price: $0.89

Phone Jack Wall Plate Ivory 6P6C RJ12 RJ-12 Conductor 5 Pack Modular Flush Mount Audio Data Line Signal, Part # Leviton C2675-I, C2675I

Your price: $3.95

Phone Jack Wall Plate Ivory 6P6C RJ12 RJ-12 Conductor 5 Pack Modular Flush Mount Audio Data Line Signal, Part # Leviton C2675-I, C2675I

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flathead screwdriver, wire cutters.

Instructions:

1. Remove existing wall plate.
2. Clean cut line cord from wall box.
3. Remove 1-1/2" of outer jacket and 1/2" of insulation from colored wire leads.
4. Loosen terminal screws on jack.
5. Tighten screws.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $9.95

Our Discounted Price: $3.95

Phone Jack Wall Plate White 6P6C RJ12 RJ-12 Conductor 5 Pack Modular Flush Mount Audio Data Line Signal, Part # Leviton C2675-W, C2675W

Your price: $3.95

Phone Jack Wall Plate White 6P6C RJ12 RJ-12 Conductor 5 Pack Modular Flush Mount Audio Data Line Signal, Part # Leviton C2675-W, C2675W

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flathead screwdriver, wire cutters.

Instructions:

1. Remove existing wall plate.
2. Clean cut line cord from wall box.
3. Remove 1-1/2" of outer jacket and 1/2" of insulation from colored wire leads.
4. Loosen terminal screws on jack.
5. Tighten screws.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $9.95

Our Discounted Price: $3.95

Dual F-81 Coax Wall Plate Phone Ivory RJ11 Connector 3 GHz Combo Modular Jack Aspen Telephone, TV Antenna Video Coaxial Cable Connectors, Part # CWP-501

Your price: $0.84

Dual F-81 Coax Wall Plate Phone Ivory RJ11 Connector 3 GHz Combo Modular Jack Aspen Telephone, TV Antenna Video Coaxial Cable Connectors, Part # CWP-501

For hook-up of both modular telephone wire and coax cable from one location.

• Two High Frequency 3 GHz "F" coax outlets
• One phone outlet for one or two line devices.

Instructions:

1. Connect cables or coax antenna wire to the screw terminals on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $1.95

Our Discounted Price: $0.84

Phone Jack F-Type Coax Wall Plate Combo Gold White Gemini Telephone Flush Mount Modular Data Signal Line Outlet Audio Video 75 Ohm F Type Coaxial Cable Plug Cover Jack, Part # WTA59

Your price: $0.38

Phone Jack F-Type Coax Wall Plate Combo Gold White Gemini Telephone Flush Mount Modular Data Signal Line Outlet Audio Video 75 Ohm F Type Coaxial Cable Plug Cover Jack, Part # WTA59

Allows flush mounted connection of 75 ohm Coax Cable through a wall along with phone line cord. Use for initial installations or replacement of modular four prong wall jacks. Tools needed: wire cutters, wire strippers, and Phillips screwdriver.

Instructions:

• Remove old receptacle from wall box
• Connect existing phone wires from wall box to new jack
• Connect Coax Cable from antenna to back of plate
• Replace flush mounted wall jack to wall box using screws enclosed

Retail Price: $1.19

Our Discounted Price: $0.38

Round Phone Wall Plate Ivory RJ-11 RJ11 Modular Jack Flush Mount Deco Audio Data Line Signal Outlet Plug Connect Cover, Part # RCA TP248, TP-248

Your price: $1.29

Round Phone Wall Plate Ivory RJ-11 RJ11 Modular Jack Flush Mount Deco Audio Data Line Signal Outlet Plug Connect Cover, Part # RCA TP248, TP-248

This product is no longer available for purchase.

Please check out our Modular Wall Plate Section for similar products!!!!

For connecting wall mount modular phones. Standard type telephone plugs. Lifetime Warranty. Fit standard electrical box or cover up of non-standard box.

Retail Price: $5.95

Our Discounted Price: $1.29

Phone Wall Mount Plate Jack RJ12 RJ-12 Modular Ivory 6P6C Conductor Surface Audio Data Line Signal Hanger Bracket, Part # Leviton C2663-I, C2663I

Your price: $0.79

Phone Wall Mount Plate Jack RJ12 RJ-12 Modular Ivory 6P6C Conductor Surface Audio Data Line Signal Hanger Bracket, Part # Leviton C2663-I, C2663I

Surface Mount jack and cover for wall phones. Fits all standard modular wall phones. Replaces or adds a surface mount, 6-wire wall phone jack. For use with up to 2 phone lines. Tools required: flathead screwdriver and wire cutters.

Instructions:

1. Remove existing wall jack.
2. Remove cover plate.
3. Pull line cord through to front of terminal plate.
4. Fasten jack to wall box through diagonal openings in jack.
5. Remove 2: of outer jacket from line cord.
6. Connect colored wire leads to terminals matching colors.
7. Replace cover plate.
8. Mount phone on mounting screws.
9. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.79

Wall Plate Phone Jack F-81 Dual White Connector Gold Magnavox M61030 Modular RJ11 RJ-11 6P4C Coax Combo Twin Flush Mount Telephone Line Jack with AV Outlet, 75 Ohm Coaxial Cable Plug, Part # M-61030

Your price: $0.38

Wall Plate Phone Jack F-81 Dual White Connector Gold Magnavox M61030 Modular RJ11 RJ-11 6P4C Coax Combo Twin Flush Mount Telephone Line Jack with AV Outlet, 75 Ohm Coaxial Cable Plug, Part # M-61030

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks.

Tools Needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.19

Our Discounted Price: $0.38

Phone Jack Wall Plate Ivory 6P4C Conductor Modular Outlet Flush Mount Audio Data Signal Line Plug Face Telephone Cover with Rear Wiring Terminals, Part # Woods 0706I

Your price: $0.39

Phone Jack Wall Plate Ivory 6P4C Conductor Modular Outlet Flush Mount Audio Data Signal Line Plug Face Telephone Cover with Rear Wiring Terminals, Part # Woods 0706I

Plastic wall jacks are furnished with mounting hardware for easy installation. The Non-UL types are very economical and are to be used where UL is not required. 15 micro inches of gold plate on the contacts is standard on all jacks. Rounded configuration, rear wiring terminals allow these wall plates to fit all standard receptacle boxes.

Instructions:

• Remove old receptacle from outlet box
• Strip 3" from outer jacket of telephone wire and approximately 1/4" from each conductor
• Connect existing wiring from wall box to new modular jack
• Secure wall plate and jack to box using the screws provided

Retail Price: $1.79

Our Discounted Price: $0.39

Dual Phone Jack Wall Plate 6P6C Conductor Ivory Double RJ12 RJ-12 Modular Telephone 2 Port Wire Duplex Flush Mount Data Line Twin Outlet Plug Jack Cover, Part # Leviton C2676-I, C2676I

Your price: $0.79

Dual Phone Jack Wall Plate 6P6C Conductor Ivory Double RJ12 RJ-12 Modular Telephone 2 Port Wire Duplex Flush Mount Data Line Twin Outlet Plug Jack Cover, Part # Leviton C2676-I, C2676I

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone /answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single Line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $2.95

Our Discounted Price: $0.79

Dual Phone Jack Wall Plate White RJ12 6 Wire Conductor Leviton C2676-W 6P6C 2 Port Decora Duplex Flush Mount Modular Double Data Line Twin Outlet Plug Jack Cover, Part # C2676W

Your price: $0.95

Dual Phone Jack Wall Plate White RJ12 6 Wire Conductor Leviton C2676-W 6P6C 2 Port Decora Duplex Flush Mount Modular Double Data Line Twin Outlet Plug Jack Cover, Part # C2676W

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone /answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Installation Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

SINGLE LINE WIRING:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

DUAL LINE WIRING:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $2.95

Our Discounted Price: $0.95

Stainless Steel Phone Jack Wall Mount Plate Modular 6P4C RJ11 RJ-11 Data Line Audio Signal Surface Face Mount Connect Snap-In Cord Outlet Plug Cover, Part # Woods 964

Your price: $3.49

Stainless Steel Phone Jack Wall Mount Plate Modular 6P4C RJ11 RJ-11 Data Line Audio Signal Surface Face Mount Connect Snap-In Cord Outlet Plug Cover, Part # Woods 964

Stainless steel cover. Four color-coded screw-down connections. Fits all standard modular wall phones.

Installation instructions:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Retail Price: $7.95

Our Discounted Price $3.49

Combo Phone Coax Wall Outlet Plate White Magnavox M61032 Combo Wall Plate Electrical Plug Outlet Coax Cable Telephone Modular Line Jack, Video Signal Connection, Part # M-61032

Your price: $1.59

Combo Phone Coax Wall Outlet Plate White Magnavox M61032 Combo Wall Plate Electrical Plug Outlet Coax Cable Telephone Modular Line Jack, Video Signal Connection, Part # M-61032

Allows connection of 75 ohm coaxial cable, phone line cord, and AC outlet through existing AC outlet brackets. Tools needed: wire cutter, wire stripper, Phillips-head screwdriver.

Instructions:

1. Remove old wall plate from AC outlet.
2. Run new or existing phone wires to new jack, remembering to match colors of wire to color coded terminals.
3. Connect coaxial cable to back of plate.
4. Replace wall jack to wall box, using screws enclosed.

Retail Price: $3.95

Our Discounted Price: $1.59

Steren 300-204WH 4 Conductor Smooth Finish Flush Wall Plate White Phone Modular Jack 6P4C RJ11 RJ-11 Wire Audio Signal Telephone Line Plug Jack, Part # 300204-WH

Your price: $0.49

Steren 300-204WH 4 Conductor Smooth Finish Flush Wall Plate White Phone Modular Jack 6P4C RJ11 RJ-11 Wire Audio Signal Telephone Line Plug Jack, Part # 300204-WH

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flat head screwdriver, wire cutters.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate.
3. Clean cut line cord from wall box.
4. Loosen terminal screws on jack. Attach wire leads by color to corresponding pre-wired terminals screws.
5. Tighten screws, making sure wire leads are not in contact with each other.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.49

Phone Coax Wall Plate Jack Ivory Combo Magnavox M61036 Telephone Coax F 75 Ohm Connector Combination Flush Mount Wall Plate Modular Telephone with Video Connector for TV Signal, Part # M-61036

Your price: $0.95

Phone Coax Wall Plate Jack Ivory Combo Magnavox M61036 Telephone Coax F 75 Ohm Connector Combination Flush Mount Wall Plate Modular Telephone with Video Connector for TV Signal, Part # M-61036

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.95

Our Discounted Price: $0.95

Phone Wall Mount Plate Jack RJ12 RJ-12 3 Pack Modular White 6P6C Conductor Surface Audio Data Line Signal Hanger Bracket, Part # Leviton C2663-W, C2663W

Your price: $1.95

Phone Wall Mount Plate Jack RJ12 RJ-12 3 Pack Modular White 6P6C Conductor Surface Audio Data Line Signal Hanger Bracket, Part # Leviton C2663-W, C2663W

Surface Mount jack and cover for wall phones. Fits all standard modular wall phones. Replaces or adds a surface mount, 6-wire wall phone jack. For use with up to 2 phone lines. Tools required: flathead screwdriver and wire cutters.

Instructions:

1. Remove existing wall jack.
2. Remove cover plate.
3. Pull line cord through to front of terminal plate.
4. Fasten jack to wall box through diagonal openings in jack.
5. Remove 2: of outer jacket from line cord.
6. Connect colored wire leads to terminals matching colors.
7. Replace cover plate.
8. Mount phone on mounting screws.
9. Replace handset on disconnected phone.

Retail Price: $5.95

Our Discounted Price: $1.95

Phone Wall Mount Plate Jack RJ12 RJ-12 3 Pack Modular Ivory 6P6C Conductor Surface Audio Data Line Signal Hanger Bracket, Part # Leviton C2663-I, C2663I

Your price: $1.95

Phone Wall Mount Plate Jack RJ12 RJ-12 3 Pack Modular Ivory 6P6C Conductor Surface Audio Data Line Signal Hanger Bracket, Part # Leviton C2663-I, C2663I

Surface Mount jack and cover for wall phones. Fits all standard modular wall phones. Replaces or adds a surface mount, 6-wire wall phone jack. For use with up to 2 phone lines. Tools required: flathead screwdriver and wire cutters.

Instructions:

1. Remove existing wall jack.
2. Remove cover plate.
3. Pull line cord through to front of terminal plate.
4. Fasten jack to wall box through diagonal openings in jack.
5. Remove 2: of outer jacket from line cord.
6. Connect colored wire leads to terminals matching colors.
7. Replace cover plate.
8. Mount phone on mounting screws.
9. Replace handset on disconnected phone.

Retail Price: $5.95

Our Discounted Price: $1.95

Phone Wall Plate White 1 Pack 6P4C RJ11 RJ-11 Jack Flush Mount 4 Conductor Wire Modular Audio Data Signal Line Plug, Part # Woods 0706W

Your price: $0.59

Phone Wall Plate White 1 Pack 6P4C RJ11 RJ-11 Jack Flush Mount 4 Conductor Wire Modular Audio Data Signal Line Plug, Part # Woods 0706W

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flat head screwdriver, wire cutters.

Installation Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate.
3. Clean cut line cord from wall box.
4. Loosen terminal screws on jack. Attach wire leads by color to corresponding pre-wired terminals screws.
5. Tighten screws, making sure wire leads are not in contact with each other.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $0.95

Our Discounted Price: $0.59

Dual Phone Jack F Coax Wall Plate Combo White RJ11 RJ-11 Modular Data Line Audio Signal Video 75 Ohm Coaxial Cable Plug, 2 Device Outlet Cover, Part # Woods 0968W

Your price: $0.37

Dual Phone Jack F Coax Wall Plate Combo White RJ11 RJ-11 Modular Data Line Audio Signal Video 75 Ohm Coaxial Cable Plug, 2 Device Outlet Cover, Part # Woods 0968W

For hook-up of both modular telephone wire and coax cable from one location.

• One standard "F" coax outlet
• One phone outlet for one or two line devices.

Instructions:

1. Connect cable or coax antenna wire to the screw terminal on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $1.95

Our Discounted Price: $0.37

Dual Wall Plate Phone Jack F Type Coax Combo White RJ11 RJ-11 Coax Cable Data Line Audio Signal Video 75 Ohm Coaxial Plug, 2 Device Outlet Cover, Part # Leviton C2450, C-2450

Your price: $0.89

Dual Wall Plate Phone Jack F Type Coax Combo White RJ11 RJ-11 Coax Cable Data Line Audio Signal Video 75 Ohm Coaxial Plug, 2 Device Outlet Cover, Part # Leviton C2450, C-2450

This sectional wall plate is no longer available for purchase.

Similar products can be found in the Telephone Jack Wall Plate Section !!!

For hook-up of both modular telephone wire and coax cable from one location.

• One standard "F" coax outlet
• One phone outlet for one or two line devices.

Our Discounted Price: $0.89

RJ11 Phone F-Connector Wall Plate White Gold Jack F-81 Dual White Connector Philips Magnavox M61030 Modular RJ-11 6P4C Coax Combo Twin Flush Mount Telephone Line Jack with AV Outlet, 75 Ohm Coaxial Cable Plug, Part # M-61030

Your price: $0.38

RJ11 Phone F-Connector Wall Plate White Gold Jack F-81 Dual White Connector Philips Magnavox M61030 Modular RJ-11 6P4C Coax Combo Twin Flush Mount Telephone Line Jack with AV Outlet, 75 Ohm Coaxial Cable Plug, Part # M-61030

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks.

Tools Needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.19

Our Discounted Price: $0.38

Wall Phone Plate Stainless Steel Jack Modular RJ11 6P4C Flush Mount Plate RJ-11 Telephone Mount Cover with Push-On Plug Connections and Insertion Tool, Part # Leviton C-0256, C0256

Your price: $3.95

Wall Phone Plate Stainless Steel Jack Modular RJ11 6P4C Flush Mount Plate RJ-11 Telephone Mount Cover with Push-On Plug Connections and Insertion Tool, Part # Leviton C-0256, C0256

Stainless steel cover with quick-connect, push-style connections and insertion tool. Fits all standard modular wall phones.

Installation:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Our Discounted Price: $3.95

Wall Plate F-81 Coax Phone RJ11 White Outlet Jack Combo Modular Video Plate White Philips PH61032 Electrical Plug Outlet Coaxial Cable Telephone Line Jack Connection, Part # PH-61032

Your price: $1.29

Wall Plate F-81 Coax Phone RJ11 White Outlet Jack Combo Modular Video Plate White Philips PH61032 Electrical Plug Outlet Coaxial Cable Telephone Line Jack Connection, Part # PH-61032

Allows connection of 75 ohm coaxial cable, phone line cord, and AC outlet through existing AC outlet brackets. Tools needed: wire cutter, wire stripper, Phillips-head screwdriver.

Instructions:

1. Remove old wall plate from AC outlet.
2. Run new or existing phone wires to new jack, remembering to match colors of wire to color coded terminals.
3. Connect coaxial cable to back of plate.
4. Replace wall jack to wall box, using screws enclosed.

Retail Price: $3.95

Our Discounted Price: $1.29

Leviton Wall Plate Phone Jack Modular Ivory 6P4C RJ11 Conductor RJ-11 Wire Leviton C0249-I Flush Mount Audio Signal Telephone Line Plug Jack, Each, Part # C0249I

Your price: $0.69

Leviton Wall Plate Phone Jack Modular Ivory 6P4C RJ11 Conductor RJ-11 Wire Leviton C0249-I Flush Mount Audio Signal Telephone Line Plug Jack, Each, Part # C0249I

Leviton wall phone plate, Ivory. For new installation of flush mounted modular jack or replacement of previous phone jack. Includes jack, plate, and mounting hardware. To install wall- mount phone fit standard outlet box.

Retail Price: $1.95

Our Discounted Price: $0.69

Wall Plate Phone Jack Modular White 6P4C RJ11 Conductor RJ-11 Wire Leviton C0249-W Flush Mount Audio Signal Telephone Line Plug Jack, Each

Your price: $0.69

Wall Plate Phone Jack Modular White 6P4C RJ11 Conductor RJ-11 Wire Leviton C0249-W Flush Mount Audio Signal Telephone Line Plug Jack, Each

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flat head screwdriver, wire cutters.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate.
3. Clean cut line cord from wall box.
4. Loosen terminal screws on jack. Attach wire leads by color to corresponding pre-wired terminals screws.
5. Tighten screws, making sure wire leads are not in contact with each other.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.69

Leviton C2675 White Phone Jack Wall Plate 6-Wire 6P6C RJ12 Modular RJ-12 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal, Part # C2675W

Your price: $0.79

Leviton C2675 White Phone Jack Wall Plate 6-Wire 6P6C RJ12 Modular RJ-12 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal, Part # C2675W

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flathead screwdriver, wire cutters.

Instructions:

1. Remove existing wall plate.
2. Clean cut line cord from wall box.
3. Remove 1-1/2" of outer jacket and 1/2" of insulation from colored wire leads.
4. Loosen terminal screws on jack.
5. Tighten screws.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $3.95

Our Discounted Price: $0.79

Leviton Wall Plate Phone Jack Ivory Modular Surface 6P6C RJ12 RJ-12 Conductor Surface Audio Data Line Signal Hanger Bracket, Each, Part # C2663-I, C2663I

Your price: $0.79

Leviton Wall Plate Phone Jack Ivory Modular Surface 6P6C RJ12 RJ-12 Conductor Surface Audio Data Line Signal Hanger Bracket, Each, Part # C2663-I, C2663I

Surface Mount jack and cover for wall phones. Fits all standard modular wall phones. Replaces or adds a surface mount, 6-wire wall phone jack. For use with up to 2 phone lines. Tools required: flat-head screwdriver and wire cutters.

Instructions:

1. Remove existing wall jack.
2. Remove cover plate.
3. Pull line cord through to front of terminal plate.
4. Fasten jack to wall box through diagonal openings in jack.
5. Remove 2: of outer jacket from line cord.
6. Connect colored wire leads to terminals matching colors.
7. Replace cover plate.
8. Mount phone on mounting screws.
9. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.79

Leviton Wall Plate Phone Jack White Modular 6P6C RJ12 Surface Mount RJ-12 Conductor Surface Audio Data Line Signal Hanger Bracket, Each, Part # C2663-W, C2663W

Your price: $0.79

Leviton Wall Plate Phone Jack White Modular 6P6C RJ12 Surface Mount RJ-12 Conductor Surface Audio Data Line Signal Hanger Bracket, Each, Part # C2663-W, C2663W

Surface Mount jack and cover for wall phones. Fits all standard modular wall phones. Replaces or adds a surface mount, 6-wire wall phone jack. For use with up to 2 phone lines. Tools required: flat-head screwdriver and wire cutters.

Instructions:

1. Remove existing wall jack.
2. Remove cover plate.
3. Pull line cord through to front of terminal plate.
4. Fasten jack to wall box through diagonal openings in jack.
5. Remove outer jacket from line cord.
6. Connect colored wire leads to terminals matching colors.
7. Replace cover plate.
8. Mount phone on mounting screws.
9. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.79

RJ-11 Phone Wall Plate Jack RJ-11 Ivory 6P4C Modular Conductor Woods Flush Telephone 4 Wire Conductor Standard Face Mount Modular Data Line Audio Signal Jack Outlet Plug Cover, Single Pack

Your price: $0.29

RJ-11 Phone Wall Plate Jack RJ-11 Ivory 6P4C Modular Conductor Woods Flush Telephone 4 Wire Conductor Standard Face Mount Modular Data Line Audio Signal Jack Outlet Plug Cover, Single Pack

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flat head screwdriver, wire cutters.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate.
3. Clean cut line cord from wall box.
4. Loosen terminal screws on jack. Attach wire leads by color to corresponding pre-wired terminals screws.
5. Tighten screws, making sure wire leads are not in contact with each other.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $0.95

Our Discounted Price: $0.29

Wall Plate Phone Jack Modular Textured White Leviton 6P4C RJ11 RJ-11 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal

Your price: $0.29

Wall Plate Phone Jack Modular Textured White Leviton 6P4C RJ11 RJ-11 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal

This item is no longer available for purchase.

It has been replaced by the Steren Smooth Telephone Wall Plate!!!!

Flush mount jack and textured phone plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flathead screwdriver, wire cutters.

Instructions:

1. Remove existing wall plate.
2. Clean cut line cord from wall box.
3. Remove 1-1/2" of outer jacket and 1/2" of insulation from colored wire leads.
4. Loosen terminal screws on jack.
5. Tighten screws.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $0.95

Our Discounted Price: $0.29

Modular Phone Wall Plate White 1 Pack 6P4C RJ11 RJ-11 Jack Flush Mount 4 Conductor Wire Audio Data Signal Line Plug, Part # Woods 0706W

Your price: $0.59

Modular Phone Wall Plate White 1 Pack 6P4C RJ11 RJ-11 Jack Flush Mount 4 Conductor Wire Audio Data Signal Line Plug, Part # Woods 0706W

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flat head screwdriver, wire cutters.

Installation Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate.
3. Clean cut line cord from wall box.
4. Loosen terminal screws on jack. Attach wire leads by color to corresponding pre-wired terminals screws.
5. Tighten screws, making sure wire leads are not in contact with each other.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $0.95

Our Discounted Price: $0.59

Steren 300-103WH Wall Plate with F-81 Connector Phone Jack White Modular Gold Connector RJ11 RJ-11 6P4C Coax Combo Twin Flush Mount Telephone Line Jack with AV Outlet, 75 Ohm Coaxial Cable Plug, Part # 300103-WH

Your price: $0.54

Steren 300-103WH Wall Plate with F-81 Connector Phone Jack White Modular Gold Connector RJ11 RJ-11 6P4C Coax Combo Twin Flush Mount Telephone Line Jack with AV Outlet, 75 Ohm Coaxial Cable Plug, Part # 300103-WH

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks.

Tools Needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.19

Our Discounted Price: $0.54

Steren 300-214WH Dual 4-Conductor White Smooth Finish Flush Phone Wall Plate Modular Duplex RJ11 6P4C 4 Wire Conductor Data Line Audio Signal Twin Outlet Connect RJ-11 Jack Plug Cover, Part # 300214-WH

Your price: $0.59

Steren 300-214WH Dual 4-Conductor White Smooth Finish Flush Phone Wall Plate Modular Duplex RJ11 6P4C 4 Wire Conductor Data Line Audio Signal Twin Outlet Connect RJ-11 Jack Plug Cover, Part # 300214-WH

One piece jack has two modular outlets enabling easy connections of two voice and data devices. Comes with screws for mounting to standard electrical outlet box.

Retail Price: $1.95

Our Discounted Price: $0.59

Leviton Dual Telephone Wall Plate White Modular RJ11 RJ-11 6P4C 4 Conductor White Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # C0254-W, C0254W

Your price: $0.59

Leviton Dual Telephone Wall Plate White Modular RJ11 RJ-11 6P4C 4 Conductor White Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # C0254-W, C0254W

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $1.49

Our Discounted Price: $0.59

Ivory Telephone Wall Plate RJ11 Data Jack Modular Phone Plate Jack 6P4C Conductor RJ-11 Wire Flush Mount Audio Signal Telephone Line Plug Jack

Your price: $0.49

Ivory Telephone Wall Plate RJ11 Data Jack Modular Phone Plate Jack 6P4C Conductor RJ-11 Wire Flush Mount Audio Signal Telephone Line Plug Jack

Leviton wall phone plate, Ivory. For new installation of flush mounted modular jack or replacement of previous phone jack. Includes jack, plate, and mounting hardware. To install wall- mount phone fit standard outlet box.

Retail Price: $0.95

Our Discounted Price: $0.49

Philips PH61032 AC RG59 Coaxial Telephone Wall Plate White Jack F-81 RJ11 Outlet RG-59 Combo Modular Video Plate AC Outlet Coaxial Cable Telephone Line Jack Connection, Part # PH-61032

Your price: $1.49

Philips PH61032 AC RG59 Coaxial Telephone Wall Plate White Jack F-81 RJ11 Outlet RG-59 Combo Modular Video Plate AC Outlet Coaxial Cable Telephone Line Jack Connection, Part # PH-61032

Allows connection of 75 ohm coaxial cable, phone line cord, and AC outlet through existing AC outlet brackets. Tools needed: wire cutter, wire stripper, Phillips-head screwdriver.

Instructions:

1. Remove old wall plate from AC outlet.
2. Run new or existing phone wires to new jack, remembering to match colors of wire to color coded terminals.
3. Connect coaxial cable to back of plate.
4. Replace wall jack to wall box, using screws enclosed.

Retail Price: $3.95

Our Discounted Price: $1.49

Eagle Aspen DTVWP-91DI Ivory 3 GHz Wall Plate DIRECTV Approved 2 F-81 Phone Modular 6P4C Jack Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors, Part # DTV-WP91-DI

Your price: $0.95

Eagle Aspen DTVWP-91DI Ivory 3 GHz Wall Plate DIRECTV Approved 2 F-81 Phone Modular 6P4C Jack Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors, Part # DTV-WP91-DI

For hook-up of both modular telephone wire and coax cable from one location.

• Two High Frequency 3 GHz "F" coax outlets
• One phone outlet for one or two line devices.

Instructions:

1. Connect cables or coax antenna wire to the screw terminals on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $1.95

Our Discounted Price: $0.95

Wall Plate Dual 3 GHz Dual F81 Video Phone Modular Jack Ivory 6P4C Eagle Aspen DTVWP-91DI Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors, Part # DTV-WP91-DI

Your price: $0.95

Wall Plate Dual 3 GHz Dual F81 Video Phone Modular Jack Ivory 6P4C Eagle Aspen DTVWP-91DI Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors, Part # DTV-WP91-DI

For hook-up of both modular telephone wire and coax cable from one location.

• Two High Frequency 3 GHz "F" coax outlets
• One phone outlet for one or two line devices.

Instructions:

1. Connect cables or coax antenna wire to the screw terminals on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $1.95

Our Discounted Price: $0.95

Summit 3 GHz Wall Plate with F-81 Connector Phone Jack Ivory 6P4C Eagle Aspen DTVWP-91I Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors

Your price: $0.68

Summit 3 GHz Wall Plate with F-81 Connector Phone Jack Ivory 6P4C Eagle Aspen DTVWP-91I Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors,

For hook-up of both modular telephone wire and coax cable from one location.

• One High Frequency 3 GHz "F" coax outlet
• One phone outlet for one or two line devices.

Instructions:

1. Connect cables or coax antenna wire to the screw terminals on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $0.95

Our Discounted Price: $0.68

Eagle Aspen DTVWP-91I 3 GHz Wall Plate DIRECTV Approved F-81 Connector Phone Modular 6P4C Jack Ivory Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors, Part # DTV-WP91-I

Your price: $0.79

Eagle Aspen DTVWP-91I 3 GHz Wall Plate DIRECTV Approved F-81 Connector Phone Modular 6P4C Jack Ivory Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors, Part # DTV-WP91-I

For hook-up of both modular telephone wire and coax cable from one location.

• One High Frequency 3 GHz "F" coax outlet
• One phone outlet for one or two line devices.

Instructions:

1. Connect cables or coax antenna wire to the screw terminals on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $0.95

Our Discounted Price: $0.79

Eagle Aspen DTVWP-91W 3 GHz Wall Plate F-81 Connector Phone Modular 6P4C Jack White Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors, Part # DTV-WP91-W

Your price: $0.68

Eagle Aspen DTVWP-91W 3 GHz Wall Plate F-81 Connector Phone Modular 6P4C Jack White Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors, Part # DTV-WP91-W

For hook-up of both modular telephone wire and coax cable from one location.

• One High Frequency 3 GHz "F" coax outlet
• One phone outlet for one or two line devices.

Instructions:

1. Connect cables or coax antenna wire to the screw terminals on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $0.95

Our Discounted Price: $0.68

3 GHz Wall Plate with F-81 Connector Phone Jack Modular 6P4C White Eagle Aspen DTVWP-91W Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors, Part # DTV-WP91-W

Your price: $0.68

3 GHz Wall Plate with F-81 Connector Phone Jack Modular 6P4C White Eagle Aspen DTVWP-91W Coax RJ11 Connector Combo Telephone Jack TV Antenna Video Coaxial Cable Connectors, Part # DTV-WP91-W

For hook-up of both modular telephone wire and coax cable from one location.

• One High Frequency 3 GHz "F" coax outlet
• One phone outlet for one or two line devices.

Instructions:

1. Connect cables or coax antenna wire to the screw terminals on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $0.95

Our Discounted Price: $0.68

Leviton Dual Phone Wall Jack Plate Ivory Decora RJ11 Modular 6P4C C2447-I Duplex Telephone Flush Mount Line Cord Audio Data Signal 2 Outlet, Part # C2447I

Your price: $0.79

Leviton Dual Phone Wall Jack Plate Ivory Decora RJ11 Modular 6P4C C2447-I Duplex Telephone Flush Mount Line Cord Audio Data Signal 2 Outlet, Part # C2447I

This item is no longer available for purchase.

Similar products can be found in the Telephone Jack Wall Plate Section !!!

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single Line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.79

Steren 301-234IV 4C Tel-TV UL Jack Ivory Wall Plate Coaxial Telephone Modular RJ11 6P4C Voice Video Combo Wall Plate Gold Plate Phone Coax Jack Combination Flush Mount, Part # 301234-IV

Your price: $0.75

Steren 301-234IV 4C Tel-TV UL Jack Ivory Wall Plate Coaxial Telephone Modular RJ11 6P4C Voice Video Combo Wall Plate Gold Plate Phone Coax Jack Combination Flush Mount, Part # 301234-IV

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.95

Our Discounted Price: $0.75

Philips USA RG59 RJ11 Wall Plate Ivory F-81 PH61036 Phone Coax Wall RJ-11 Combo Telephone Coax F 75 Ohm Connector Combination Flush Mount Modular Wall Plate, Part # PH-61036

Your price: $1.09

Philips USA RG59 RJ11 Wall Plate Ivory F-81 PH61036 Phone Coax Wall RJ-11 Combo Telephone Coax F 75 Ohm Connector Combination Flush Mount Modular Wall Plate, Part # PH-61036

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.95

Our Discounted Price: $1.09

Steren 300-103IV CATV Telecom Wall Plate Gold F-Jack Phone Modular Ivory RG59 RJ11 F-81 Coax Wall RJ-11 Combo Coax Telephone 75 Ohm Connector Combination Flush Mount Modular Wall Plate, Part # 300103-IV

Your price: $0.76

Steren 300-103IV CATV Telecom Wall Plate Gold F-Jack Phone Modular Ivory RG59 RJ11 F-81 Coax Wall RJ-11 Combo Coax Telephone 75 Ohm Connector Combination Flush Mount Modular Wall Plate, Part # 300103-IV

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.95

Our Discounted Price: $0.76

Vanco 3122330 Wall Plate Phone Electrical Coax White Combo Wall Outlet Plate Plug Coax Cable Telephone Modular Line Jack, Video Signal Connection, Part # 3122330

Your price: $1.39

Vanco 3122330 Wall Plate Phone Electrical Coax White Combo Wall Outlet Plate Plug Coax Cable Telephone Modular Line Jack, Video Signal Connection, Part # 3122330

Allows connection of 75 ohm coaxial cable, phone line cord, and AC outlet through existing AC outlet brackets. Tools needed: wire cutter, wire stripper, Phillips-head screwdriver.

Instructions:

1. Remove old wall plate from AC outlet.
2. Run new or existing phone wires to new jack, remembering to match colors of wire to color coded terminals.
3. Connect coaxial cable to back of plate.
4. Replace wall jack to wall box, using screws enclosed.

Retail Price: $3.95

Our Discounted Price: $1.39

AC RG59 Coax Telephone Wall Plate White Combo Duplex RJ11 Phone Electrical Outlet Plate Plug Coax Cable Telephone Modular Line RJ-11 Jack, Video Signal Connection

Your price: $1.69

AC RG59 Coax Telephone Wall Plate White Combo Duplex RJ11 Phone Electrical Outlet Plate Plug Coax Cable Telephone Modular Line RJ-11 Jack, Video Signal Connection

Allows connection of 75 ohm coaxial cable, phone line cord, and AC outlet through existing AC outlet brackets. Tools needed: wire cutter, wire stripper, Phillips-head screwdriver.

Instructions:

1. Remove old wall plate from AC outlet.
2. Run new or existing phone wires to new jack, remembering to match colors of wire to color coded terminals.
3. Connect coaxial cable to back of plate.
4. Replace wall jack to wall box, using screws enclosed.

Retail Price: $3.95

Our Discounted Price: $1.69

Wall Plate Telephone Stainless Steel Jack Modular 6P4C RJ11 Wall Mount RJ-11 Data Line Audio Signal Surface Face Mount Connect Snap-In Cord Outlet Plug Cover, Part # Woods 964

Your price: $3.49

Wall Plate Telephone Stainless Steel Jack Modular 6P4C RJ11 Wall Mount RJ-11 Data Line Audio Signal Surface Face Mount Connect Snap-In Cord Outlet Plug Cover, Part # Woods 964

Stainless steel cover. Four color-coded screw-down connections. Fits all standard modular wall phones.

Installation instructions:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Retail Price: $7.95

Our Discounted Price $3.49

Leviton Telephone Wall Plate White 6P4C Jack Modular RJ11 Textured RJ-11 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal

Your price: $0.39

Leviton Telephone Wall Plate White 6P4C Jack Modular RJ11 Textured RJ-11 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal

This item is no longer available for purchase.

It has been replaced by the Steren Smooth Telephone Wall Plate!!!!

Flush mount jack and textured phone plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flathead screwdriver, wire cutters.

Instructions:

1. Remove existing wall plate.
2. Clean cut line cord from wall box.
3. Remove 1-1/2" of outer jacket and 1/2" of insulation from colored wire leads.
4. Loosen terminal screws on jack.
5. Tighten screws.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $0.95

Our Discounted Price: $0.39

Steren 300-235WH 2.5 F-Connector Jack Phone Wall Plate White 3 GHz F-81 Connector Phone Modular 6P4C Jack RJ11 Connector Combo Telephone RJ-11 Jack TV Coaxial Cable Connectors, Part # 300235-WH

Your price: $0.99

Steren 300-235WH 2.5 F-Connector Jack Phone Wall Plate White 3 GHz F-81 Connector Phone Modular 6P4C Jack RJ11 Connector Combo Telephone RJ-11 Jack TV Coaxial Cable Connectors, Part # 300235-WH

For hook-up of both modular telephone wire and coax cable from one location.

• One High Frequency 3 GHz "F" coax outlet
• One phone outlet for one or two line devices.

Instructions:

1. Connect cables or coax antenna wire to the screw terminals on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $1.95

Our Discounted Price: $0.99

Steren 300-238IV 2.5 GHz Dual F Connector Single Phone Wall Plate Ivory 3 GHz Dual F-81 Coax Wall Plate RJ11 Combo RJ-11 Modular Jack Telephone, TV Antenna Video Coaxial Cable Connectors, Part # 300238-IV

Your price: $0.49

Steren 300-238IV 2.5 GHz Dual F Connector Single Phone Wall Plate Ivory 3 GHz Dual F-81 Coax Wall Plate RJ11 Combo RJ-11 Modular Jack Telephone, TV Antenna Video Coaxial Cable Connectors, Part # 300238-IV

For hook-up of both modular telephone wire and coax cable from one location.

• Two High Frequency 3 GHz "F" coax outlets
• One phone outlet for one or two line devices.

Instructions:

1. Connect cables or coax antenna wire to the screw terminals on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $1.95

Our Discounted Price: $0.49

Steren 300-234WH F and Phone Wall Plate White Jack and F-Video Connector RJ11 Flush Mount Gold Jack F-81 Dual Modular RJ-11 6P4C Coax Combo Twin Telephone Line Jack with AV Outlet, 75 Ohm Coaxial Cable Plug, Part # 300234

Your price: $0.84

Steren 300-234WH F and Phone Wall Plate White Jack and F-Video Connector RJ11 Flush Mount Gold Jack F-81 Dual Modular RJ-11 6P4C Coax Combo Twin Telephone Line Jack with AV Outlet, 75 Ohm Coaxial Cable Plug, Part # 300234

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks.

Tools Needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.19

Our Discounted Price: $0.84

Steren 300-004IV 4 Conductor Wall Jack Plate Ivory Decora Phone Modular RJ11 6P4C Single Port Phone Jack Modular Outlet Flush Mount Audio Data Signal Line Plug Face Telephone Cover, Part # 300004-IV

Your price: $0.49

Steren 300-004IV 4 Conductor Wall Jack Plate Ivory Decora Phone Modular RJ11 6P4C Single Port Phone Jack Modular Outlet Flush Mount Audio Data Signal Line Plug Face Telephone Cover, Part # 300004-IV

Plastic wall jacks are furnished with mounting hardware for easy installation. The Non-UL types are very economical and are to be used where UL is not required. 15 micro inches of gold plate on the contacts is standard on all jacks. Rounded configuration, rear wiring terminals allow these wall plates to fit all standard receptacle boxes.

Instructions:

• Remove old receptacle from outlet box
• Strip 3" from outer jacket of telephone wire and approximately 1/4" from each conductor
• Connect existing wiring from wall box to new modular jack
• Secure wall plate and jack to box using the screws provided

Retail Price: $1.79

Our Discounted Price: $0.49

Leviton C2676 Ivory Dual Phone Wall Plate RJ12 6P6C Conductor Modular Jack 2-Port Double RJ-12 Telephone Wire Duplex Flush Mount Data Line Twin Outlet Plug Jack Cover, Part # C2676I

Your price: $0.76

Leviton C2676 Ivory Dual Phone Wall Plate RJ12 6P6C Conductor Modular Jack 2-Port Double RJ-12 Telephone Wire Duplex Flush Mount Data Line Twin Outlet Plug Jack Cover, Part # C2676I

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone /answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single Line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $2.95

Our Discounted Price: $0.76

Steren 300-216IV Dual 6 Conductor Ivory Flush Mount Wall Plate 6P6C Modular RJ12 Double RJ-12 Modular Telephone 2 Port Wire Duplex Flush Mount Data Line Twin Outlet Plug Jack Cover, Part # 300216-IV

Your price: $0.67

Steren 300-216IV Dual 6 Conductor Ivory Flush Mount Wall Plate 6P6C Modular RJ12 Double RJ-12 Modular Telephone 2 Port Wire Duplex Flush Mount Data Line Twin Outlet Plug Jack Cover, Part # 300216-IV

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone /answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single Line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.67

Leviton C2676 White Dual Phone Jack Wall Plate 6P6C Double RJ12 Modular 6 Wire Conductor RJ-12 2 Port Decora Duplex Flush Mount Modular Double Data Line Twin Outlet Plug Jack Cover, Part # C2676W

Your price: $0.95

Leviton C2676 White Dual Phone Jack Wall Plate 6P6C Double RJ12 Modular 6 Wire Conductor RJ-12 2 Port Decora Duplex Flush Mount Modular Double Data Line Twin Outlet Plug Jack Cover, Part # C2676W

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone /answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Installation Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

SINGLE LINE WIRING:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

DUAL LINE WIRING:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $2.95

Our Discounted Price: $0.95

Steren 300-216WH Dual Phone Jack White Wall Plate 6P6C Double RJ12 Modular 6 Wire Conductor RJ-12 2 Port Decora Duplex Flush Mount Modular Double Data Line Twin Outlet Plug Jack Cover, Part # 300216-WH

Your price: $0.69

Steren 300-216WH Dual Phone Jack White Wall Plate 6P6C Double RJ12 Modular 6 Wire Conductor RJ-12 2 Port Decora Duplex Flush Mount Modular Double Data Line Twin Outlet Plug Jack Cover, Part # 300216-WH

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone /answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Installation Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

SINGLE LINE WIRING:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

DUAL LINE WIRING:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.69

Leviton C2675 Ivory Phone Jack Wall Plate 6P6C RJ12 Modular RJ-12 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal, Part # C2675I

Your price: $0.47

Leviton C2675 Ivory Phone Jack Wall Plate 6P6C RJ12 Modular RJ-12 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal, Part # C2675I

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flathead screwdriver, wire cutters.

Instructions:

1. Remove existing wall plate.
2. Clean cut line cord from wall box.
3. Remove 1-1/2" of outer jacket and 1/2" of insulation from colored wire leads.
4. Loosen terminal screws on jack.
5. Tighten screws.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.47

Leviton C0253 Ivory Wall Plate Phone Jack Surface Mount 6P4C Modular Wall Mount 1 Pack Telephone Hanging Bracket, Data Signal Plug Jack Flush, Part # C0253I

Your price: $0.69

Leviton C0253 Ivory Wall Plate Phone Jack Surface Mount 6P4C Modular Wall Mount 1 Pack Telephone Hanging Bracket, Data Signal  Plug Jack Flush, Part # C0253I

Flush mount jack and cover for wall phones. Fits all standard modular phones. Replaces or adds a flush mount, modular wall phone jack.

Installation:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Our Discounted Price: $0.69

RCA TP6247 Wall Plate Phone Jack Ivory 6-Wire 6P6C RJ12 Conductor Modular RJ-12 Outlet Gold Wire Flush Mount 2 Line Audio Data Signal Plug Cover, Part # TP-6247

Your price: $0.79

RCA TP6247 Wall Plate Phone Jack Ivory 6-Wire 6P6C RJ12 Conductor Modular RJ-12 Outlet Gold Wire Flush Mount 2 Line Audio Data Signal Plug Cover, Part # TP-6247

RCA Gold Series 6 conductor modular wall outlet, Ivory. For new installation of flush mounted modular jack or replacement of previous phone jack. Includes jack, plate, and mounting hardware. For the better connection on 2-line phone systems.

Retail Price: $1.95

Our Discounted Price: $0.79

RCA TP6253 Wall Plate Dual Phone Jack Ivory 6 Wire 6P6C RJ12 Conductor 2 Outlet Flush Mount Modular RJ-12 Telephone Data Line Audio Signal Double Plug Cover, Part # TP-6253

Your price: $0.89

RCA TP6253 Wall Plate Dual Phone Jack Ivory 6 Wire 6P6C RJ12 Conductor 2 Outlet Flush Mount Modular RJ-12 Telephone Data Line Audio Signal Double Plug Cover, Part # TP-6253

For connecting two modular phones to one wall jack. Attach spade lugs from existing line cord to corresponding color terminals. Then replace the face plate and plug in to phone.

Retail Price: $1.95

Our Discounted Price: $0.89

Steren 300-234WH RJ11 Phone F-Connector Wall Plate White Combo RJ-11 Modular Data Line Audio Signal Video 75 Ohm Coaxial Cable Plug, 2 Device Outlet Cover, Part # 300234-WH

Your price: $0.54

Steren 300-234WH RJ11 Phone F-Connector Wall Plate White Combo RJ-11 Modular Data Line Audio Signal Video 75 Ohm Coaxial Cable Plug, 2 Device Outlet Cover, Part # 300234-WH

For hook-up of both modular telephone wire and coax cable from one location.

• One standard "F" coax outlet
• One phone outlet for one or two line devices.

Instructions:

1. Connect cable or coax antenna wire to the screw terminal on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $1.95

Our Discounted Price: $0.54

Steren 300-234IV Phone F Connector Wall Plate Ivory RJ11 F81 Gold Plate Jack Phone Modular RJ-11 F-81 Coax Telephone Combo 75 Ohm Connector Flush Mount Modular Wall Plate, Part # 300234-IV

Your price: $0.49

Steren 300-234IV Phone F Connector Wall Plate Ivory RJ11 F81 Gold Plate Jack Phone Modular RJ-11 F-81 Coax Telephone Combo 75 Ohm Connector Flush Mount Modular Wall Plate, Part # 300234-IV

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.19

Our Discounted Price: $0.49

Steren 300-235IV 2.5 GHz F-Connector Phone Wall Plate Ivory F-81 Telephone Modular 6P4C Jack Coax RJ11 Connector Combo Rj-11 Jack TV Antenna Video Coaxial Cable Connectors, Part # 300255-IV

Your price: $0.65

Steren 300-235IV 2.5 GHz F-Connector Phone Wall Plate Ivory F-81 Telephone Modular 6P4C Jack Coax RJ11 Connector Combo Rj-11 Jack TV Antenna Video Coaxial Cable Connectors, Part # 300255-IV

For hook-up of both modular telephone wire and coax cable from one location.

• One High Frequency 3 GHz "F" coax outlet
• One phone outlet for one or two line devices.

Instructions:

1. Connect cables or coax antenna wire to the screw terminals on the back of the plate.
2. Strip 3" from outer jacket of telephone wire and 1/2" from each conductor.
3. Connect wires to modular jack using the Wire Cross Reference Chart.
4. Secure wall plate to junction box using screws provided.

Retail Price: $1.95

Our Discounted Price: $0.65

Leviton Decora Ivory Single Phone Wall Plate 6P4C Jack Modular RJ11 C2449-I Duplex Telephone Flush Mount Line Cord Audio Data Signal 1 Outlet, Part # C2449I

Your price: $0.59

Leviton Decora Ivory Single Phone Wall Plate 6P4C Jack Modular RJ11 C2449-I Duplex Telephone Flush Mount Line Cord Audio Data Signal 1 Outlet, Part # C2449I

Flush mount, single outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Retail Price: $1.19

Our Discounted Price: $0.59

Steren 300-206WH 6 Conductor Smooth Finish Flush Wall Plate White Phone Jack 6-Wire 6P6C RJ12 Modular RJ-12 Conductor 1 Pack Modular Audio Data Line Signal, Part # 300206-WH

Your price: $0.47

Steren 300-206WH 6 Conductor Smooth Finish Flush Wall Plate White Phone Jack 6-Wire 6P6C RJ12 Modular RJ-12 Conductor 1 Pack Modular Audio Data Line Signal, Part # 300206-WH

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flathead screwdriver, wire cutters.

Instructions:

1. Remove existing wall plate.
2. Clean cut line cord from wall box.
3. Remove 1-1/2" of outer jacket and 1/2" of insulation from colored wire leads.
4. Loosen terminal screws on jack.
5. Tighten screws.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.47

Steren 300-206IV 6-Conductor Smooth Finish Flush Wall Plate Ivory Phone 6P6C Faceplate RJ12 Jack Wall Plate Modular RJ-12 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal, Part # 300206-IV

Your price: $0.42

Steren 300-206IV 6-Conductor Smooth Finish Flush Wall Plate Ivory Phone 6P6C Faceplate RJ12 Jack Wall Plate Modular RJ-12 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal, Part # 300206-IV

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flathead screwdriver, wire cutters.

Instructions:

1. Remove existing wall plate.
2. Clean cut line cord from wall box.
3. Remove 1-1/2" of outer jacket and 1/2" of insulation from colored wire leads.
4. Loosen terminal screws on jack.
5. Tighten screws.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.42

Wall Plate Phone Jack Modular Ivory RJ11 6P4C Four Wire Conductor Flush Mount Telephone Textured Modular Face Plate Data Line Audio Signal Jack Outlet Plug Cover, Single Pack

Your price: $0.29

Wall Plate Phone Jack Modular Ivory RJ11 6P4C Four Wire Conductor Flush Mount Telephone Textured Modular Face Plate Data Line Audio Signal Jack Outlet Plug Cover, Single Pack

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flat head screwdriver, wire cutters.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate.
3. Clean cut line cord from wall box.
4. Loosen terminal screws on jack. Attach wire leads by color to corresponding pre-wired terminals screws.
5. Tighten screws, making sure wire leads are not in contact with each other.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $0.95

Our Discounted Price: $0.29

Steren 300-094WH Phone Jack Wall Plate Modular White Surface Mount 4 Wire Flush Telephone Line Plug Cover Wall Connect Hanger, Part # 300094-WH

Your price: $0.69

Steren 300-094WH Phone Jack Wall Plate Modular White Surface Mount 4 Wire Flush Telephone Line Plug Cover Wall Connect Hanger, Part # 300094-WH

Flush mount jack and cover for wall phones. Fits all standard modular phones. Replaces or adds a flush mount, modular wall phone jack.

Installation Instructions:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Our Discounted Price: $0.69

Steren 300-104IV Wall Plate Ivory F-Video Pin Connector Telephone Modular RJ11 Combo TV Phone Ivory Wall Plate 75 Ohm Connector Combination Flush Mount Wall Plate, Part # 300104-IV

Your price: $0.42

Steren 300-104IV Wall Plate Ivory F-Video Pin Connector Telephone Modular RJ11 Combo TV Phone Ivory Wall Plate 75 Ohm Connector Combination Flush Mount Wall Plate, Part # 300104-IV

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.19

Our Discounted Price: $0.42

Steren 300-237WH Dual TV Telephone Jack Wall Plate White 2 Coaxial F-Connector 1-Phone 4C Modular RJ11 Port Combo TV Phone Wall Plate 75 Ohm Connector Combination Flush Mount Wall Plate, Part # 300237-WH

Your price: $0.75

Steren 300-237WH Dual TV Telephone Jack Wall Plate White 2 Coaxial F-Connector 1-Phone 4C Modular RJ11 Port Combo TV Phone Wall Plate 75 Ohm Connector Combination Flush Mount Wall Plate, Part # 300237-WH

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.19

Our Discounted Price: $0.75

Eagle Aspen 502W Wall Plate with Dual F-81 Connector Jack RJ11 TV Telephone Combo Wall Plate White 2 Coaxial F-Connector 1-Phone 4C Modular RJ-11 Port 75 Ohm Connector Combination Flush Mount Wall Plate, Part # 502-W

Your price: $0.45

Eagle Aspen 502W Wall Plate with Dual F-81 Connector Jack RJ11 TV Telephone Combo Wall Plate White 2 Coaxial F-Connector 1-Phone 4C Modular RJ-11 Port 75 Ohm Connector Combination Flush Mount Wall Plate, Part # 502-W

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.29

Our Discounted Price: $0.45

Steren 300-095 4 Conductor Steel Wall Phone Jack Plate Stainless Modular RJ11 6P4C Flush Mount Plate RJ-11 Telephone Mount Cover with Push-On Plug Connections and Insertion Tool, Part # 3000995

Your price: $3.49

Steren 300-095 4 Conductor Steel Wall Phone Jack Plate Stainless Modular RJ11 6P4C Flush Mount Plate RJ-11 Telephone Mount Cover with Push-On Plug Connections and Insertion Tool, Part # 3000995

Stainless steel cover with quick-connect, push-style connections and insertion tool. Fits all standard modular wall phones.

Installation:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Our Discounted Price: $3.49

Steren 301-234WH 4C Tel-TV UL Jack White Wall Plate Coaxial Telephone Modular RJ11 6P4C Voice Video Combo Wall Plate Gold Plate Phone Coax Jack Combination Flush Mount, Part # 301234-WH

Your price: $0.69

Steren 301-234WH 4C Tel-TV UL Jack White Wall Plate Coaxial Telephone Modular RJ11 6P4C Voice Video Combo Wall Plate Gold Plate Phone Coax Jack Combination Flush Mount, Part # 301234-WH

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.95

Our Discounted Price: $0.69

Steren 301-094IV 4-Conductor UL Telephone Jack Wall Plate Ivory Modular 6P4C RJ11 Phone Jack Wall Plate Mount for Hanging RJ-11 Bracket, Data Signal Plug Jack Flush, Part # 301094-IV

Your price: $0.89

Steren 301-094IV 4-Conductor UL Telephone Jack Wall Plate Ivory Modular 6P4C RJ11 Phone Jack Wall Plate Mount for Hanging RJ-11 Bracket, Data Signal  Plug Jack Flush, Part # 301094-IV

Flush mount jack and cover for wall phones. Fits all standard modular phones. Replaces or adds a flush mount, modular wall phone jack.

Installation:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Our Discounted Price: $0.89

Steren 301-094WH 4-Conductor UL Telephone Jack Wall Plate White Modular 6P4C RJ11 Surface Mount 4 Wire RJ-11 Telephone Line Plug Cover Wall Connect Hanger, Part # 301094-WH

Your price: $0.89

Steren 301-094WH 4-Conductor UL Telephone Jack Wall Plate White Modular 6P4C RJ11 Surface Mount 4 Wire RJ-11 Telephone Line Plug Cover Wall Connect Hanger, Part # 301094-WH

Flush mount jack and cover for wall phones. Fits all standard modular phones. Replaces or adds a flush mount, modular wall phone jack.

Installation Instructions:

• Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
• Pull line cord through to front of terminal plate.
• Fasten jack to wall box through diagonal openings in jack, using long screws provided, or hollow wall fasteners.
• Remove 2" of outer jacket from line cord, exposing colored wire leads.
• Connect colored wire leads to terminals matching by color.
• Secure clear insulation film around modular jack. Replace cover plate.
• Mount phone on mounting screws.
• Replace handset on disconnected phone.

Our Discounted Price: $0.89

Steren 300-003IV 4-Conductor Wall Plate Jack Ivory Decorator Single Phone Wall Plate 6P4C Jack Modular RJ11 Duplex Telephone Flush Mount Line Cord Audio Data Signal 1 Outlet, Part # 300003-IV

Your price: $0.99

Steren 300-003IV 4-Conductor Wall Plate Jack Ivory Decorator Single Phone Wall Plate 6P4C Jack Modular RJ11 Duplex Telephone Flush Mount Line Cord Audio Data Signal 1 Outlet, Part # 300003-IV

Flush mount, single outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Retail Price: $1.79

Our Discounted Price: $0.99

Steren 301-204IV 4C UL Flush Modular Telephone Jack Ivory Wall Plate 6P4C RJ11 Face Plate Wall Plate RJ-11 Smooth Finish Wire Flush Mount Audio Signal Telephone Line Plug Jack, Part # 301204-IV

Your price: $0.55

Steren 301-204IV 4C UL Flush Modular Telephone Jack Ivory Wall Plate 6P4C RJ11 Face Plate Wall Plate RJ-11 Smooth Finish Wire Flush Mount Audio Signal Telephone Line Plug Jack, Part # 301204-IV

Steren wall phone plate, Ivory. For new installation of flush mounted modular jack or replacement of previous phone jack. Includes jack, plate, and mounting hardware. To install wall- mount phone fit standard outlet box.

Retail Price: $1.49

Our Discounted Price: $0.55

Steren 301-204WH 4C UL Flush Modular Telephone Jack White Wall Plate 6P4C RJ11 4 Wire Conductor RJ-11 Flush Mount Audio Signal Telephone Line Plug Jack, Part # 301204-WH

Your price: $0.60

Steren 301-204WH 4C UL Flush Modular Telephone Jack White Wall Plate 6P4C RJ11 4 Wire Conductor RJ-11 Flush Mount Audio Signal Telephone Line Plug Jack, Part # 301204-WH

Flush mount jack and plate. Fits all standard modular phones. Installs in standard electrical box to replace or add a flush mount, modular wall jack. Tools required: flat head screwdriver, wire cutters.

Installation:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate.
3. Clean cut line cord from wall box.
4. Loosen terminal screws on jack. Attach wire leads by color to corresponding pre-wired terminals screws.
5. Tighten screws, making sure wire leads are not in contact with each other.
6. Install jack and plate into wall box with screws provided.
7. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.60

Steren 300-234AL Almond F-Connector Telephone Wall Plate F-81 Video RJ11 TV Faceplate Gold Plate Jack Phone Modular RJ-11 F81 Coaxial Cable / Phone Combo Flush Mount Modular Wall Plate, Part # 300234-AL

Your price: $0.54

Steren 300-234AL Almond F-Connector Telephone Wall Plate F-81 Video RJ11 TV Faceplate Gold Plate Jack Phone Modular RJ-11 F81 Coaxial Cable / Phone Combo Flush Mount Modular Wall Plate, Part # 300234-AL

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.19

Our Discounted Price: $0.54

Steren 300-237IV Dual F-81 Telephone Wall Plate Ivory RJ11 TV Faceplate Coaxial Jack 1-Phone 4C Modular RJ-11 Port Combo TV Phone Wall Plate 75 Ohm Connector Combination Flush Mount Wall Plate, Part # 300237-IV

Your price: $0.92

Steren 300-237IV Dual F-81 Telephone Wall Plate Ivory RJ11 TV Faceplate Coaxial Jack 1-Phone 4C Modular RJ-11 Port Combo TV Phone Wall Plate 75 Ohm Connector Combination Flush Mount Wall Plate, Part # 300237-IV

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.79

Our Discounted Price: $0.92

Steren 300-204LA Phone Wall Plate Face RJ11 Light Almond 4 Conductor Wire Flush Modular Jack Single Gold Plate Contacts Telephone 6P4C Smooth Finish RJ-11 Jack, Part # 300204-LA

Your price: $0.59

Steren 300-204LA Phone Wall Plate Face RJ11 Light Almond 4 Conductor Wire Flush Modular Jack Single Gold Plate Contacts Telephone 6P4C Smooth Finish RJ-11 Jack, Part # 300204-LA

Steren wall phone plate, Light Almond. For new installation of flush mounted modular jack or replacement of previous phone jack. Includes jack, plate, and mounting hardware. To install wall- mount phone fit standard outlet box.

Retail Price: $1.49

Our Discounted Price: $0.59

Steren 300-234LA F-Connector Telephone Wall Plate Light Almond Faceplate TV F-81 Gold Plate Flush RJ11 Coaxial Video RJ-11 Coaxial Cable / Phone Combo Flush Mount Modular Wall Plate, Part # 300234-LA

Your price: $0.79

Steren 300-234LA F-Connector Telephone Wall Plate Light Almond Faceplate TV F-81 Gold Plate Flush RJ11 Coaxial Video RJ-11 Coaxial Cable / Phone Combo Flush Mount Modular Wall Plate, Part # 300234-LA

Allows flush mounted connection of 75 ohm coax cable through a wall along with phone line cord. Use for installations or replacement of modular four prong jacks. Tools needed: wire strippers, wire cutters, Phillips head screwdriver.

Instructions:

• Remove old receptacle from wall box.
• Connect existing phone wires from wall box to new jack taking care to match colors of wire to color coded terminals.
• Connect Coax Cable from antenna to back of plate.
• Replace flush mounted wall jack to wall box using screws enclosed.

Retail Price: $1.39

Our Discounted Price: $0.79

Steren 300-214LA Dual Light Almond RJ11 Telephone Wall Plate 4-Conductor Modular Flush Face Jack 2 Socket 6P4C RJ-11 Face Plate Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # 300214-LA

Your price: $0.79

Steren 300-214LA Dual Light Almond RJ11 Telephone Wall Plate 4-Conductor Modular Flush Face Jack 2 Socket 6P4C RJ-11 Face Plate Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # 300214-LA

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $2.95

Our Discounted Price: $0.79

Steren 300-214AL Dual RJ11 Telephone Wall Plate Almond 4-Conductor Modular Flush Face Jack 2 Socket 6P4C RJ-11 Face Plate Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # 300214-AL

Your price: $0.55

Steren 300-214AL Dual RJ11 Telephone Wall Plate Almond 4-Conductor Modular Flush Face Jack 2 Socket 6P4C RJ-11 Face Plate Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # 300214-AL

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.55

Steren 301-214AL Dual Modular Telephone Wall Plate Almond RJ11 Flush Face 4-Conductor Gold Plated Contacts Jack 2 Socket 6P4C UL RJ-11 Face Plate Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # 301214-AL

Your price: $0.72

Steren 301-214AL Dual Modular Telephone Wall Plate Almond RJ11 Flush Face 4-Conductor Gold Plated Contacts Jack 2 Socket 6P4C UL RJ-11 Face Plate Duplex Audio Signal Data Line Cord Plug, 2 Outlets, Part # 301214-AL

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $2.95

Our Discounted Price: $0.72

Steren 301-204AL Modular Telephone Wall Plate Almond RJ11 Flush Face 4-Conductor Gold Plated Contacts Jack 1 Socket 6P4C UL RJ-11 Face Plate Audio Signal Data Line Cord Plug, Part # 301204-AL

Your price: $0.50

Steren 301-204AL Modular Telephone Wall Plate Almond RJ11 Flush Face 4-Conductor Gold Plated Contacts Jack 1 Socket 6P4C UL RJ-11 Face Plate Audio Signal Data Line Cord Plug, Part # 301204-AL

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.50

Steren 300-204AL 4-Conductor RJ-11 Jack Modular Wall Plate Flush Almond Face Telephone Gold Plated Contacts 6P4C Jack 1 Socket UL RJ-11 Face Plate Audio Signal Data Line Cord Plug, Part # 300204-AL

Your price: $0.44

Steren 300-204AL 4-Conductor RJ-11 Jack Modular Wall Plate Flush Almond Face Telephone Gold Plated Contacts 6P4C Jack 1 Socket UL RJ-11 Face Plate Audio Signal Data Line Cord Plug, Part # 300204-AL

Flush mount, twin outlet modular jack and plate. Fits all standard modular phones. Permits connection of two phone or phone / answering machine combination. Installs in standard electrical box, to replace existing flush mount jack or add new jack.

Instructions:

1. Disconnect one phone in house by removing handset from hook before working with exposed phone wire.
2. Remove existing wall plate and jack.
3. Clean cut line cord from wall box.
4. Remove 1-1/2" of insulation from colored wire leads.

Single line Wiring:

1. To tie in answering machine or additional phone on same line, transfer wire leads by color to top jack terminals.
2. Attach wire leads from line cord by color to top jack terminals.

Dual Line Wiring:

1. To connect two separate phone lines, connect each incoming line cord to a separate terminal block. Attach wire leads by color to terminal screws.
2. Install jack and plate into wall box with screws provided.
3. Replace handset on disconnected phone.

Retail Price: $1.95

Our Discounted Price: $0.44

Steren 301-004WH 4C Jack Telephone White Modular Textured Finish Wall Plate Phone Jack 6P4C RJ11 RJ-11 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal, Part # 301004-WH

Your price: $0.29

Steren 301-004WH 4C Jack Telephone White Modular Textured Finish Wall Plate Phone Jack 6P4C RJ11 RJ-11 Conductor 1 Pack Modular Flush Mount Audio Data Line Signal, Part # 301004-WH

This item is no longer available for purchase.

It has been replaced by the Steren Smooth Telephone Wall Plate!!!!

Modular Telephone or Data Standard Wall Plate. High-Impact ABS Plastic. Matching Mounting Screws. Flush Mount Textured Finish Wall Plate.

Specifications:

• Modular Telephone or Data Standard Wall Plate
• 4C White Textured Telephone Jack Wall Plate
• High-Impact ABS Plastic with Matching Mounting Screws
• Flush-Mount Textured Finish
• 6µ" Gold-Plated Contacts

Retail Price: $0.95

Our Discounted Price: $0.29

Steren 300-054IV Round Circular Phone Jack Wall Plate Ivory Modular 4-Conductor Telephone Jack Wall Plate RJ11 6P4C Gold Plated Contacts Flush Mount RJ-11 Data Signal Line Plug Face Round Telephone Cover, Part # 300054-IV

Your price: $0.78

Steren 300-054IV Round Circular Phone Jack Wall Plate Ivory Modular 4-Conductor Telephone Jack Wall Plate RJ11 6P4C Gold Plated Contacts Flush Mount RJ-11 Data Signal Line Plug Face Round Telephone Cover, Part # 300054-IV

Round Telephone Jack Wall Plate

Round Modular Telephone Jack Plates. High-Impact ABS Plastic with Color-Matched Screws. 6 Gold-Plated Contacts.

Specifications:

• Round Ivory Flush Mount Modular Telephone Jack Plates
• High-Impact ABS Plastic with Color-Matched Screws
• 6 Gold-Plated Contacts

Retail Price: $1.79

Our Discounted Price: $0.78

Steren 300-054WH Round Circular Phone Jack Wall Plate White Modular 4-Conductor Telephone Jack Wall Plate RJ11 6P4C Gold Plated Contacts Flush Mount RJ-11 Data Signal Line Plug Face Round Telephone Cover, Part # 300054-WH

Your price: $0.78

Steren 300-054WH Round Circular Phone Jack Wall Plate White Modular 4-Conductor Telephone Jack Wall Plate RJ11 6P4C Gold Plated Contacts Flush Mount RJ-11 Data Signal Line Plug Face Round Telephone Cover, Part # 300054-WH

Round Telephone Jack Wall Plate

Round Modular Telephone Jack Plates. High-Impact ABS Plastic with Color-Matched Screws. 6 Gold-Plated Contacts.

Specifications:

• Round White Flush Mount Modular Telephone Jack Plates
• High-Impact ABS Plastic with Color-Matched Screws
• 6 Gold-Plated Contacts

Retail Price: $1.79

Our Discounted Price: $0.78